part_id stringlengths 18 23 | family stringclasses 15
values | tier int64 0 3 | seed int64 1.18B 1.18B | symmetry stringclasses 4
values | op_count int64 1 7 | ir_hash stringlengths 16 16 | generator_version stringclasses 1
value | license stringclasses 1
value | geometry_signature dict | dimensions dict | params unknown | source stringlengths 695 3.31k |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
gear_462c9c80_0204 | gear | 1 | 1,177,328,768 | none | 1 | c71bc49f37c376cf | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 187000,
"surface_area": 39000,
"principal_moments": [
215000000,
215000000,
423000000
],
"n_faces": 201,
"n_edges": 597,
"n_vertices": 398
} | {
"lines": [
"Spur gear, module 4 mm, 33 teeth (pitch Ø132 mm), face width 14.3 mm, Ø25.4 mm bore."
],
"text": "Spur gear, module 4 mm, 33 teeth (pitch Ø132 mm), face width 14.3 mm, Ø25.4 mm bore."
} | {
"module": {
"type": "float",
"default": 4,
"min": 1,
"max": 6,
"step": 0.25,
"group": "Gear",
"label": "Module (mm)"
},
"teeth": {
"type": "int",
"default": 33,
"min": 10,
"max": 40,
"step": 1,
"group": "Gear",
"label": "Number of teeth"
},
"gear_w": {... | import cadquery as cq
import math
import py_gearworks as _gw
# Generated by CadQuarry v0.6.0 — seed 1177328768 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"module": {"type": 'float', "default": 4.0, "min": 1.0, "max": 6.0, "step": 0.25, "group": 'Gear', "label": 'Module (mm)'},
"teeth": ... |
bracket_462c9c81_0205 | bracket | 2 | 1,177,328,769 | mirror_xy | 1 | b4f69a3432dd45d5 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 29500,
"surface_area": 12000,
"principal_moments": [
9180000,
14999999.999999998,
16299999.999999998
],
"n_faces": 19,
"n_edges": 51,
"n_vertices": 34
} | {
"lines": [
"C-channel bracket: base leg 50 mm, vertical leg 42.7 mm, 40 mm wide, 6 mm thick; 1 × Ø6.4 mm hole per leg; 8.3 mm corner gusset."
],
"text": "C-channel bracket: base leg 50 mm, vertical leg 42.7 mm, 40 mm wide, 6 mm thick; 1 × Ø6.4 mm hole per leg; 8.3 mm corner gusset."
} | {
"base_len": {
"type": "float",
"default": 50,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Base leg length (mm)"
},
"vert_len": {
"type": "float",
"default": 42.7,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Vertical leg leng... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328769 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_len": {"type": 'float', "default": 50, "min": 25.0, "max": 90.0, "step": 1.0, "group": 'Body', "label": 'Base leg length (mm)'},
"vert_len": {"type": 'float', "defaul... |
lofted_462c9c82_0206 | lofted | 1 | 1,177,328,770 | mirror_xy | 2 | 4de2a8995ae84d2b | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 78700,
"surface_area": 13800,
"principal_moments": [
26899999.999999996,
28999999.999999996,
28999999.999999996
],
"n_faces": 8,
"n_edges": 18,
"n_vertices": 12
} | {
"lines": [
"Lofted body through 2 sections: Ø57.52 mm circular section → 32.6 × 32.6 mm rectangular section.",
"One Ø16.9 mm hole in a 1×1 grid, 10 × 10 mm pitch."
],
"text": "Lofted body through 2 sections: Ø57.52 mm circular section → 32.6 × 32.6 mm rectangular section. One Ø16.9 mm hole in a 1×1 grid... | {
"loft_base": {
"type": "float",
"default": 57.52,
"min": 28.8,
"max": 92,
"step": 1,
"group": "Body",
"label": "Base size (mm)"
},
"loft_top": {
"type": "float",
"default": 32.6,
"min": 13,
"max": 69,
"step": 1,
"group": "Body",
"label": "Top size (mm)"
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328770 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"loft_base": {"type": 'float', "default": 57.52, "min": 28.8, "max": 92.0, "step": 1.0, "group": 'Body', "label": 'Base size (mm)'},
"loft_top": {"type": 'float', "default"... |
profiled_462c9c83_0207 | profiled | 0 | 1,177,328,771 | mirror_xy | 1 | 661aee1859100c72 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 399000,
"surface_area": 41800,
"principal_moments": [
91399999.99999999,
2740000000,
2760000000
],
"n_faces": 8,
"n_edges": 18,
"n_vertices": 12
} | {
"lines": [
"freeform sketched section (6 segments: 2 straight, 3 arcs, 1 curve), ~40.095 × 45.354 mm, extruded 285.2 mm thick."
],
"text": "freeform sketched section (6 segments: 2 straight, 3 arcs, 1 curve), ~40.095 × 45.354 mm, extruded 285.2 mm thick."
} | {
"sk_w": {
"type": "float",
"default": 50,
"min": 25,
"max": 90,
"step": 1,
"group": "Sketch",
"label": "Sketch width (mm)"
},
"sk_h": {
"type": "float",
"default": 48.58,
"min": 24.3,
"max": 87.4,
"step": 1,
"group": "Sketch",
"label": "Sketch height (mm)"... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328771 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"sk_w": {"type": 'float', "default": 50, "min": 25.0, "max": 90.0, "step": 1.0, "group": 'Sketch', "label": 'Sketch width (mm)'},
"sk_h": {"type": 'float', "default": 48.58... |
revolved_462c9c84_0208 | revolved | 1 | 1,177,328,772 | mirror_x | 2 | e4574bdc31a7e2b9 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 100000,
"surface_area": 22600,
"principal_moments": [
35200000,
85000000,
85000000
],
"n_faces": 8,
"n_edges": 14,
"n_vertices": 8
} | {
"lines": [
"Revolved body, Ø46.01 mm × 90 mm tall with Ø26.5 mm bore.",
"Chamfer 0.4 mm on the >Z or <Z edges."
],
"text": "Revolved body, Ø46.01 mm × 90 mm tall with Ø26.5 mm bore. Chamfer 0.4 mm on the >Z or <Z edges."
} | {
"outer_d": {
"type": "float",
"default": 46.01,
"min": 6,
"max": 80,
"step": 1,
"group": "Body",
"label": "Outer diameter (mm)"
},
"length": {
"type": "float",
"default": 90,
"min": 27,
"max": 270,
"step": 1,
"group": "Body",
"label": "Length (mm)"
},
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328772 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"outer_d": {"type": 'float', "default": 46.01, "min": 6.0, "max": 80.0, "step": 1.0, "group": 'Body', "label": 'Outer diameter (mm)'},
"length": {"type": 'float', "default"... |
tapped_462c9c85_0209 | tapped | 0 | 1,177,328,773 | mirror_xy | 1 | a32dc95c6e6817fd | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 31500,
"surface_area": 7510,
"principal_moments": [
5790000,
5790000,
9650000
],
"n_faces": 131,
"n_edges": 365,
"n_vertices": 236
} | {
"lines": [
"One M12x1.75 tapped hole in a plate."
],
"text": "One M12x1.75 tapped hole in a plate."
} | {
"major_d": {
"type": "float",
"default": 12,
"min": 3,
"max": 24,
"step": 0.5,
"group": "Thread",
"label": "Thread major Ø (mm)"
},
"pitch": {
"type": "float",
"default": 1.75,
"min": 0.35000000000000003,
"max": 3.5,
"step": 0.05,
"group": "Thread",
"label... | import cadquery as cq
from bd_warehouse import thread as _bdt
import build123d as _bd
# Generated by CadQuarry v0.6.0 — seed 1177328773 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"major_d": {"type": 'float', "default": 12.0, "min": 3.0, "max": 24.0, "step": 0.5, "group": 'Thread', "label": ... |
tapped_462c9c86_0210 | tapped | 1 | 1,177,328,774 | none | 1 | cc7e2ffbf8bb19f9 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 61800,
"surface_area": 13000,
"principal_moments": [
18200000,
20300000,
34900000
],
"n_faces": 614,
"n_edges": 1684,
"n_vertices": 1072
} | {
"lines": [
"Four M6x1 tapped holes in a plate."
],
"text": "Four M6x1 tapped holes in a plate."
} | {
"major_d": {
"type": "float",
"default": 6,
"min": 3,
"max": 24,
"step": 0.5,
"group": "Thread",
"label": "Thread major Ø (mm)"
},
"pitch": {
"type": "float",
"default": 1,
"min": 0.35000000000000003,
"max": 3.5,
"step": 0.05,
"group": "Thread",
"label": "... | import cadquery as cq
from bd_warehouse import thread as _bdt
import build123d as _bd
# Generated by CadQuarry v0.6.0 — seed 1177328774 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"major_d": {"type": 'float', "default": 6.0, "min": 3.0, "max": 24.0, "step": 0.5, "group": 'Thread', "label": '... |
compound_462c9c87_0211 | compound | 1 | 1,177,328,775 | mirror_x | 3 | 44bf3f0b38a3d437 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 78800,
"surface_area": 14800,
"principal_moments": [
22899999.999999996,
24799999.999999996,
28299999.999999996
],
"n_faces": 15,
"n_edges": 36,
"n_vertices": 24
} | {
"lines": [
"Rectangular body, 40 × 48.6 × 38.9 mm (W×D×H).",
"31.7 × 29.2 mm rectangular section attachment, 8 mm long, from right face.",
"Four Ø5.3 mm holes at the corners, 19.02 × 17.52 mm spacing on the >X face."
],
"text": "Rectangular body, 40 × 48.6 × 38.9 mm (W×D×H). 31.7 × 29.2 mm rectangul... | {
"block_w": {
"type": "float",
"default": 40,
"min": 15,
"max": 100,
"step": 1,
"group": "Body",
"label": "Block width (mm)"
},
"block_d": {
"type": "float",
"default": 48.6,
"min": 10,
"max": 100,
"step": 1,
"group": "Body",
"label": "Block depth (mm)"
}... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328775 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"block_w": {"type": 'float', "default": 40, "min": 15.0, "max": 100.0, "step": 1.0, "group": 'Body', "label": 'Block width (mm)'},
"block_d": {"type": 'float', "default": 4... |
revolved_462c9c88_0212 | revolved | 2 | 1,177,328,776 | radial | 2 | b891d05a1391e0c0 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 261000,
"surface_area": 39500,
"principal_moments": [
190000000,
262000000,
262000000
],
"n_faces": 9,
"n_edges": 14,
"n_vertices": 9
} | {
"lines": [
"Revolved body, Ø69.85 mm × 103.8 mm tall with 5.43 mm-wide groove 3.49 mm deep.",
"Chamfer 1 mm on the >Z or <Z edges."
],
"text": "Revolved body, Ø69.85 mm × 103.8 mm tall with 5.43 mm-wide groove 3.49 mm deep. Chamfer 1 mm on the >Z or <Z edges."
} | {
"outer_d": {
"type": "float",
"default": 69.85,
"min": 6,
"max": 80,
"step": 1,
"group": "Body",
"label": "Outer diameter (mm)"
},
"length": {
"type": "float",
"default": 103.8,
"min": 31.1,
"max": 311.4,
"step": 1,
"group": "Body",
"label": "Length (mm)"
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328776 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"outer_d": {"type": 'float', "default": 69.85, "min": 6.0, "max": 80.0, "step": 1.0, "group": 'Body', "label": 'Outer diameter (mm)'},
"length": {"type": 'float', "default"... |
block_462c9c89_0213 | block | 1 | 1,177,328,777 | radial | 2 | f0ee387b2b657af2 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 119000,
"surface_area": 18100,
"principal_moments": [
50299999.99999999,
51199999.99999999,
85700000
],
"n_faces": 8,
"n_edges": 18,
"n_vertices": 12
} | {
"lines": [
"Rectangular body, 66.24 × 28 × 65.5 mm (W×D×H).",
"Six Ø5.3 mm holes on a Ø39.8 mm bolt circle."
],
"text": "Rectangular body, 66.24 × 28 × 65.5 mm (W×D×H). Six Ø5.3 mm holes on a Ø39.8 mm bolt circle."
} | {
"block_w": {
"type": "float",
"default": 66.24,
"min": 15,
"max": 100,
"step": 1,
"group": "Body",
"label": "Block width (mm)"
},
"block_d": {
"type": "float",
"default": 28,
"min": 6,
"max": 100,
"step": 1,
"group": "Body",
"label": "Block depth (mm)"
}... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328777 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"block_w": {"type": 'float', "default": 66.24, "min": 15.0, "max": 100.0, "step": 1.0, "group": 'Body', "label": 'Block width (mm)'},
"block_d": {"type": 'float', "default"... |
flanged_462c9c8a_0214 | flanged | 2 | 1,177,328,778 | none | 2 | 85e2deb04428f96f | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 706000,
"surface_area": 92000,
"principal_moments": [
1650000000,
1650000000,
1670000000
],
"n_faces": 10,
"n_edges": 21,
"n_vertices": 14
} | {
"lines": [
"Revolved body, Ø80 mm × 108.4 mm tall with Ø34.1 mm bore, Ø178.8 mm × 13 mm flange.",
"Four Ø5.3 mm holes on a Ø107.2 mm bolt circle."
],
"text": "Revolved body, Ø80 mm × 108.4 mm tall with Ø34.1 mm bore, Ø178.8 mm × 13 mm flange. Four Ø5.3 mm holes on a Ø107.2 mm bolt circle."
} | {
"outer_d": {
"type": "float",
"default": 80,
"min": 20,
"max": 100,
"step": 1,
"group": "Body",
"label": "Outer diameter (mm)"
},
"length": {
"type": "float",
"default": 108.4,
"min": 32.5,
"max": 271,
"step": 1,
"group": "Body",
"label": "Length (mm)"
}... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328778 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"outer_d": {"type": 'float', "default": 80, "min": 20.0, "max": 100.0, "step": 1.0, "group": 'Body', "label": 'Outer diameter (mm)'},
"length": {"type": 'float', "default":... |
threaded_462c9c8b_0215 | threaded | 3 | 1,177,328,779 | none | 1 | ee6eb43f7c4dea7c | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 8400,
"surface_area": 3910,
"principal_moments": [
281000,
1330000,
1330000
],
"n_faces": 110,
"n_edges": 280,
"n_vertices": 172
} | {
"lines": [
"Tr 18x4 external thread, 42 mm long."
],
"text": "Tr 18x4 external thread, 42 mm long."
} | {
"thread_size": {
"type": "enum",
"default": "18x4",
"choices": [
"8x1.5",
"10x2",
"12x3",
"14x3",
"16x4",
"18x4",
"20x4",
"24x5",
"28x5",
"30x6",
"36x6",
"40x7"
],
"group": "Thread",
"label": "Size designation"
},
"t... | import cadquery as cq
from bd_warehouse import thread as _bdt
import build123d as _bd
# Generated by CadQuarry v0.6.0 — seed 1177328779 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"thread_size": {"type": 'enum', "default": '18x4', "choices": ['8x1.5', '10x2', '12x3', '14x3', '16x4', '18x4', ... |
gear_462c9c8c_0216 | gear | 2 | 1,177,328,780 | mirror_x | 1 | c7dd972a80e161cc | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 345000,
"surface_area": 49200,
"principal_moments": [
501000000,
501000000,
977000000
],
"n_faces": 148,
"n_edges": 438,
"n_vertices": 292
} | {
"lines": [
"Spur gear, module 5 mm, 29 teeth (pitch Ø145 mm), face width 21 mm, Ø28.1 mm bore."
],
"text": "Spur gear, module 5 mm, 29 teeth (pitch Ø145 mm), face width 21 mm, Ø28.1 mm bore."
} | {
"module": {
"type": "float",
"default": 5,
"min": 1,
"max": 6,
"step": 0.25,
"group": "Gear",
"label": "Module (mm)"
},
"teeth": {
"type": "int",
"default": 29,
"min": 10,
"max": 40,
"step": 1,
"group": "Gear",
"label": "Number of teeth"
},
"gear_w": {... | import cadquery as cq
import math
import py_gearworks as _gw
# Generated by CadQuarry v0.6.0 — seed 1177328780 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"module": {"type": 'float', "default": 5.0, "min": 1.0, "max": 6.0, "step": 0.25, "group": 'Gear', "label": 'Module (mm)'},
"teeth": ... |
block_462c9c8d_0217 | block | 3 | 1,177,328,781 | radial | 6 | 3e51340a66affb32 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 3610,
"surface_area": 3940,
"principal_moments": [
203000,
212000,
309000
],
"n_faces": 31,
"n_edges": 102,
"n_vertices": 68
} | {
"lines": [
"Rectangular body, 20 × 13.6 × 22.8 mm (W×D×H).",
"Eight Ø4.3 mm holes on a Ø12 mm bolt circle.",
"Fillet radius 0.755 mm on vertical edges.",
"Fillet radius 0.872 mm on vertical edges (optional, off by default).",
"One Ø5.3 mm hole in a 1×1 grid, 10 × 10 mm pitch on the <Y face.",
... | {
"block_w": {
"type": "float",
"default": 20,
"min": 15,
"max": 100,
"step": 1,
"group": "Body",
"label": "Block width (mm)"
},
"block_d": {
"type": "float",
"default": 13.6,
"min": 6,
"max": 100,
"step": 1,
"group": "Body",
"label": "Block depth (mm)"
},... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328781 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"block_w": {"type": 'float', "default": 20, "min": 15.0, "max": 100.0, "step": 1.0, "group": 'Body', "label": 'Block width (mm)'},
"block_d": {"type": 'float', "default": 1... |
gear_462c9c8e_0218 | gear | 1 | 1,177,328,782 | mirror_xy | 1 | e93df20718850884 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 62700,
"surface_area": 14900,
"principal_moments": [
16900000,
16900000,
21700000
],
"n_faces": 63,
"n_edges": 183,
"n_vertices": 122
} | {
"lines": [
"Spur gear, module 5 mm, 10 teeth (pitch Ø50 mm), face width 34 mm, Ø6 mm bore."
],
"text": "Spur gear, module 5 mm, 10 teeth (pitch Ø50 mm), face width 34 mm, Ø6 mm bore."
} | {
"module": {
"type": "float",
"default": 5,
"min": 1,
"max": 6,
"step": 0.25,
"group": "Gear",
"label": "Module (mm)"
},
"teeth": {
"type": "int",
"default": 10,
"min": 10,
"max": 40,
"step": 1,
"group": "Gear",
"label": "Number of teeth"
},
"gear_w": {... | import cadquery as cq
import math
import py_gearworks as _gw
# Generated by CadQuarry v0.6.0 — seed 1177328782 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"module": {"type": 'float', "default": 5.0, "min": 1.0, "max": 6.0, "step": 0.25, "group": 'Gear', "label": 'Module (mm)'},
"teeth": ... |
tapped_462c9c8f_0219 | tapped | 2 | 1,177,328,783 | mirror_xy | 1 | c7ca0061b6c67c62 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 109000,
"surface_area": 23200,
"principal_moments": [
40000000,
62999999.99999999,
91199999.99999999
],
"n_faces": 778,
"n_edges": 2224,
"n_vertices": 1448
} | {
"lines": [
"Four M16x2 tapped holes in a plate."
],
"text": "Four M16x2 tapped holes in a plate."
} | {
"major_d": {
"type": "float",
"default": 16,
"min": 3,
"max": 24,
"step": 0.5,
"group": "Thread",
"label": "Thread major Ø (mm)"
},
"pitch": {
"type": "float",
"default": 2,
"min": 0.35000000000000003,
"max": 3.5,
"step": 0.05,
"group": "Thread",
"label": ... | import cadquery as cq
from bd_warehouse import thread as _bdt
import build123d as _bd
# Generated by CadQuarry v0.6.0 — seed 1177328783 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"major_d": {"type": 'float', "default": 16.0, "min": 3.0, "max": 24.0, "step": 0.5, "group": 'Thread', "label": ... |
sketched_462c9c90_0220 | sketched | 1 | 1,177,328,784 | mirror_x | 1 | f3f6f86af43f083f | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 22100,
"surface_area": 5610,
"principal_moments": [
2450000,
3350000,
3350000
],
"n_faces": 8,
"n_edges": 13,
"n_vertices": 7
} | {
"lines": [
"Revolved organic body from a freeform sketched section (8 segments: 5 straight, 2 arcs, 1 curve), ~16.382 × 37.37 mm half-silhouette."
],
"text": "Revolved organic body from a freeform sketched section (8 segments: 5 straight, 2 arcs, 1 curve), ~16.382 × 37.37 mm half-silhouette."
} | {
"sk_r": {
"type": "float",
"default": 17.05,
"min": 8.5,
"max": 30.7,
"step": 1,
"group": "Sketch",
"label": "Max radius (mm)"
},
"sk_h": {
"type": "float",
"default": 37.37,
"min": 18.7,
"max": 67.3,
"step": 1,
"group": "Sketch",
"label": "Height (mm)"
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328784 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"sk_r": {"type": 'float', "default": 17.05, "min": 8.5, "max": 30.7, "step": 1.0, "group": 'Sketch', "label": 'Max radius (mm)'},
"sk_h": {"type": 'float', "default": 37.37... |
lofted_462c9c92_0222 | lofted | 2 | 1,177,328,786 | mirror_x | 2 | 34fb9ecc9587e312 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 29500,
"surface_area": 6940,
"principal_moments": [
4230000,
6030000,
6030000
],
"n_faces": 13,
"n_edges": 33,
"n_vertices": 22
} | {
"lines": [
"Lofted body through 3 sections: 33.45 × 33.45 mm rectangular section → 27.2 × 27.2 mm rectangular section → 6-sided polygon section, 20.9 mm across corners.",
"One Ø7.5 mm hole in a 1×1 grid, 10 × 10 mm pitch."
],
"text": "Lofted body through 3 sections: 33.45 × 33.45 mm rectangular section ... | {
"loft_base": {
"type": "float",
"default": 33.45,
"min": 16.7,
"max": 53.5,
"step": 1,
"group": "Body",
"label": "Base size (mm)"
},
"loft_top": {
"type": "float",
"default": 20.9,
"min": 8.4,
"max": 40.1,
"step": 1,
"group": "Body",
"label": "Top size (mm... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328786 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"loft_base": {"type": 'float', "default": 33.45, "min": 16.7, "max": 53.5, "step": 1.0, "group": 'Body', "label": 'Base size (mm)'},
"loft_top": {"type": 'float', "default"... |
bracket_462c9c93_0223 | bracket | 2 | 1,177,328,787 | mirror_x | 1 | 1dc0e57e40922f6f | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 10800,
"surface_area": 4960,
"principal_moments": [
1180000,
2300000,
2340000
],
"n_faces": 13,
"n_edges": 33,
"n_vertices": 22
} | {
"lines": [
"C-channel bracket: base leg 35 mm, vertical leg 25 mm, 25 mm wide, 6 mm thick; 1 × Ø3.2 mm hole per leg; 8.4 mm corner gusset."
],
"text": "C-channel bracket: base leg 35 mm, vertical leg 25 mm, 25 mm wide, 6 mm thick; 1 × Ø3.2 mm hole per leg; 8.4 mm corner gusset."
} | {
"base_len": {
"type": "float",
"default": 35,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Base leg length (mm)"
},
"vert_len": {
"type": "float",
"default": 25,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Vertical leg length... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328787 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_len": {"type": 'float', "default": 35, "min": 25.0, "max": 90.0, "step": 1.0, "group": 'Body', "label": 'Base leg length (mm)'},
"vert_len": {"type": 'float', "defaul... |
block_462c9c94_0224 | block | 1 | 1,177,328,788 | mirror_xy | 2 | 1b2d72297557e812 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 305000,
"surface_area": 38600,
"principal_moments": [
215000000,
289000000,
434000000
],
"n_faces": 10,
"n_edges": 24,
"n_vertices": 16
} | {
"lines": [
"Rectangular body, 85 × 37.4 × 100 mm (W×D×H).",
"Four Ø6.4 mm holes at the corners, 59.5 × 26.18 mm spacing."
],
"text": "Rectangular body, 85 × 37.4 × 100 mm (W×D×H). Four Ø6.4 mm holes at the corners, 59.5 × 26.18 mm spacing."
} | {
"block_w": {
"type": "float",
"default": 85,
"min": 15,
"max": 100,
"step": 1,
"group": "Body",
"label": "Block width (mm)"
},
"block_d": {
"type": "float",
"default": 37.4,
"min": 6,
"max": 100,
"step": 1,
"group": "Body",
"label": "Block depth (mm)"
},... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328788 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"block_w": {"type": 'float', "default": 85, "min": 15.0, "max": 100.0, "step": 1.0, "group": 'Body', "label": 'Block width (mm)'},
"block_d": {"type": 'float', "default": 3... |
ribbed_462c9c95_0225 | ribbed | 1 | 1,177,328,789 | none | 2 | d93a8b9457145f01 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 9540,
"surface_area": 6160,
"principal_moments": [
809000,
1640000,
2260000
],
"n_faces": 54,
"n_edges": 132,
"n_vertices": 80
} | {
"lines": [
"Rectangular body, 45 × 25.1 × 5 mm (W×D×H).",
"Six ribs, 3 mm thick, 6 mm tall."
],
"text": "Rectangular body, 45 × 25.1 × 5 mm (W×D×H). Six ribs, 3 mm thick, 6 mm tall."
} | {
"base_w": {
"type": "float",
"default": 45,
"min": 20,
"max": 120,
"step": 1,
"group": "Base",
"label": "Base width (mm)"
},
"base_d": {
"type": "float",
"default": 25.1,
"min": 15,
"max": 120,
"step": 1,
"group": "Base",
"label": "Base depth (mm)"
},
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328789 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_w": {"type": 'float', "default": 45, "min": 20.0, "max": 120.0, "step": 1.0, "group": 'Base', "label": 'Base width (mm)'},
"base_d": {"type": 'float', "default": 25.1... |
enclosure_462c9c96_0226 | enclosure | 1 | 1,177,328,790 | mirror_x | 2 | 6d486ed9bb1fca08 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 19700,
"surface_area": 8710,
"principal_moments": [
3730000,
4730000,
4930000
],
"n_faces": 11,
"n_edges": 24,
"n_vertices": 16
} | {
"lines": [
"Rectangular body, 36.95 × 29.3 × 31 mm (W×D×H).",
"Hollowed to 4.9 mm wall thickness, open at top face."
],
"text": "Rectangular body, 36.95 × 29.3 × 31 mm (W×D×H). Hollowed to 4.9 mm wall thickness, open at top face."
} | {
"enc_w": {
"type": "float",
"default": 36.95,
"min": 30,
"max": 120,
"step": 1,
"group": "Body",
"label": "Enclosure width (mm)"
},
"enc_d": {
"type": "float",
"default": 29.3,
"min": 12,
"max": 120,
"step": 1,
"group": "Body",
"label": "Enclosure depth (m... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328790 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"enc_w": {"type": 'float', "default": 36.95, "min": 30.0, "max": 120.0, "step": 1.0, "group": 'Body', "label": 'Enclosure width (mm)'},
"enc_d": {"type": 'float', "default"... |
bracket_462c9c97_0227 | bracket | 1 | 1,177,328,791 | mirror_x | 1 | dd73dce10d76b5f4 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 12300,
"surface_area": 4330,
"principal_moments": [
1340000,
1580000,
2270000
],
"n_faces": 8,
"n_edges": 18,
"n_vertices": 12
} | {
"lines": [
"L-bracket: base leg 25 mm, vertical leg 26.8 mm, 35 mm wide, 8 mm thick; 1 × Ø4.3 mm hole per leg."
],
"text": "L-bracket: base leg 25 mm, vertical leg 26.8 mm, 35 mm wide, 8 mm thick; 1 × Ø4.3 mm hole per leg."
} | {
"base_len": {
"type": "float",
"default": 25,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Base leg length (mm)"
},
"vert_len": {
"type": "float",
"default": 26.8,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Vertical leg leng... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328791 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_len": {"type": 'float', "default": 25.0, "min": 25.0, "max": 90.0, "step": 1.0, "group": 'Body', "label": 'Base leg length (mm)'},
"vert_len": {"type": 'float', "defa... |
enclosure_462c9c98_0228 | enclosure | 1 | 1,177,328,792 | mirror_x | 2 | 9cb27b74e62cf151 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 47400,
"surface_area": 33300,
"principal_moments": [
33199999.999999996,
39300000,
50399999.99999999
],
"n_faces": 11,
"n_edges": 24,
"n_vertices": 16
} | {
"lines": [
"Rectangular body, 69.58 × 39.3 × 68.9 mm (W×D×H).",
"Hollowed to 2.9 mm wall thickness, open at top face."
],
"text": "Rectangular body, 69.58 × 39.3 × 68.9 mm (W×D×H). Hollowed to 2.9 mm wall thickness, open at top face."
} | {
"enc_w": {
"type": "float",
"default": 69.58,
"min": 30,
"max": 120,
"step": 1,
"group": "Body",
"label": "Enclosure width (mm)"
},
"enc_d": {
"type": "float",
"default": 39.3,
"min": 12,
"max": 120,
"step": 1,
"group": "Body",
"label": "Enclosure depth (m... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328792 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"enc_w": {"type": 'float', "default": 69.58, "min": 30.0, "max": 120.0, "step": 1.0, "group": 'Body', "label": 'Enclosure width (mm)'},
"enc_d": {"type": 'float', "default"... |
enclosure_462c9c99_0229 | enclosure | 2 | 1,177,328,793 | mirror_xy | 4 | 5cc7c2f83722618b | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 125000,
"surface_area": 50300,
"principal_moments": [
109000000,
231000000,
260000000
],
"n_faces": 23,
"n_edges": 60,
"n_vertices": 40
} | {
"lines": [
"Rectangular body, 115.55 × 62.9 × 56.3 mm (W×D×H).",
"Hollowed to 5.1 mm wall thickness, open at top face.",
"Four Ø4.3 mm holes at the corners, 80.885 × 44.03 mm spacing.",
"Fillet radius 3.459 mm on vertical edges."
],
"text": "Rectangular body, 115.55 × 62.9 × 56.3 mm (W×D×H). Hol... | {
"enc_w": {
"type": "float",
"default": 115.55,
"min": 30,
"max": 120,
"step": 1,
"group": "Body",
"label": "Enclosure width (mm)"
},
"enc_d": {
"type": "float",
"default": 62.9,
"min": 12,
"max": 120,
"step": 1,
"group": "Body",
"label": "Enclosure depth (... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328793 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"enc_w": {"type": 'float', "default": 115.55, "min": 30.0, "max": 120.0, "step": 1.0, "group": 'Body', "label": 'Enclosure width (mm)'},
"enc_d": {"type": 'float', "default... |
bracket_462c9c9a_0230 | bracket | 1 | 1,177,328,794 | mirror_xy | 1 | c4e32161975ff38b | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 29500,
"surface_area": 9310,
"principal_moments": [
4610000,
9740000,
11200000
],
"n_faces": 10,
"n_edges": 24,
"n_vertices": 16
} | {
"lines": [
"C-channel bracket: base leg 30 mm, vertical leg 25 mm, 57.57 mm wide, 8 mm thick; 1 × Ø4.3 mm hole per leg."
],
"text": "C-channel bracket: base leg 30 mm, vertical leg 25 mm, 57.57 mm wide, 8 mm thick; 1 × Ø4.3 mm hole per leg."
} | {
"base_len": {
"type": "float",
"default": 30,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Base leg length (mm)"
},
"vert_len": {
"type": "float",
"default": 25,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Vertical leg length... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328794 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_len": {"type": 'float', "default": 30, "min": 25.0, "max": 90.0, "step": 1.0, "group": 'Body', "label": 'Base leg length (mm)'},
"vert_len": {"type": 'float', "defaul... |
ribbed_462c9c9b_0231 | ribbed | 2 | 1,177,328,795 | mirror_x | 2 | ecad4678443715c8 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 8950,
"surface_area": 7270,
"principal_moments": [
1350000,
3390000,
4120000
],
"n_faces": 22,
"n_edges": 52,
"n_vertices": 32
} | {
"lines": [
"Rectangular body, 54.71 × 32 × 3 mm (W×D×H).",
"Two ribs, 2.5 mm thick, 16.9 mm tall."
],
"text": "Rectangular body, 54.71 × 32 × 3 mm (W×D×H). Two ribs, 2.5 mm thick, 16.9 mm tall."
} | {
"base_w": {
"type": "float",
"default": 54.71,
"min": 20,
"max": 120,
"step": 1,
"group": "Base",
"label": "Base width (mm)"
},
"base_d": {
"type": "float",
"default": 32,
"min": 15,
"max": 120,
"step": 1,
"group": "Base",
"label": "Base depth (mm)"
},
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328795 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_w": {"type": 'float', "default": 54.71, "min": 20.0, "max": 120.0, "step": 1.0, "group": 'Base', "label": 'Base width (mm)'},
"base_d": {"type": 'float', "default": 3... |
revolved_462c9c9c_0232 | revolved | 2 | 1,177,328,796 | mirror_x | 1 | f2d86c548abcba2d | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 84200,
"surface_area": 15500,
"principal_moments": [
19200000,
51299999.99999999,
51299999.99999999
],
"n_faces": 4,
"n_edges": 6,
"n_vertices": 4
} | {
"lines": [
"Revolved body, Ø40.12 mm × 77.1 mm tall with Ø14.8 mm bore."
],
"text": "Revolved body, Ø40.12 mm × 77.1 mm tall with Ø14.8 mm bore."
} | {
"outer_d": {
"type": "float",
"default": 40.12,
"min": 6,
"max": 80,
"step": 1,
"group": "Body",
"label": "Outer diameter (mm)"
},
"length": {
"type": "float",
"default": 77.1,
"min": 23.1,
"max": 231.3,
"step": 1,
"group": "Body",
"label": "Length (mm)"
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328796 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"outer_d": {"type": 'float', "default": 40.12, "min": 6.0, "max": 80.0, "step": 1.0, "group": 'Body', "label": 'Outer diameter (mm)'},
"length": {"type": 'float', "default"... |
block_462c9c9d_0233 | block | 2 | 1,177,328,797 | radial | 3 | c49b2ccf363dab1d | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 279000,
"surface_area": 52400,
"principal_moments": [
221000000,
291000000,
393000000
],
"n_faces": 27,
"n_edges": 90,
"n_vertices": 60
} | {
"lines": [
"Rectangular body, 76.45 × 47.5 × 100 mm (W×D×H).",
"Twelve Ø5.3 mm holes on a Ø45.8 mm bolt circle.",
"Pocket 43.4 × 26 mm, 56.3 mm deep, in top face."
],
"text": "Rectangular body, 76.45 × 47.5 × 100 mm (W×D×H). Twelve Ø5.3 mm holes on a Ø45.8 mm bolt circle. Pocket 43.4 × 26 mm, 56.3 m... | {
"block_w": {
"type": "float",
"default": 76.45,
"min": 15,
"max": 100,
"step": 1,
"group": "Body",
"label": "Block width (mm)"
},
"block_d": {
"type": "float",
"default": 47.5,
"min": 6,
"max": 100,
"step": 1,
"group": "Body",
"label": "Block depth (mm)"
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328797 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"block_w": {"type": 'float', "default": 76.45, "min": 15.0, "max": 100.0, "step": 1.0, "group": 'Body', "label": 'Block width (mm)'},
"block_d": {"type": 'float', "default"... |
bracket_462c9c9e_0234 | bracket | 2 | 1,177,328,798 | none | 1 | fd85c3a68500f6ef | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 23700,
"surface_area": 8210,
"principal_moments": [
2760000,
10900000,
12099999.999999998
],
"n_faces": 12,
"n_edges": 30,
"n_vertices": 20
} | {
"lines": [
"Z-bracket: base leg 40.67 mm, vertical leg 29 mm, top leg 41.8 mm, 31.45 mm wide, 8 mm thick; 1 × Ø5.3 mm hole per leg; 8.9 mm corner gusset."
],
"text": "Z-bracket: base leg 40.67 mm, vertical leg 29 mm, top leg 41.8 mm, 31.45 mm wide, 8 mm thick; 1 × Ø5.3 mm hole per leg; 8.9 mm corner gusset.... | {
"base_len": {
"type": "float",
"default": 40.67,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Base leg length (mm)"
},
"vert_len": {
"type": "float",
"default": 29,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Vertical leg len... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328798 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_len": {"type": 'float', "default": 40.67, "min": 25.0, "max": 90.0, "step": 1.0, "group": 'Body', "label": 'Base leg length (mm)'},
"vert_len": {"type": 'float', "def... |
bracket_462c9c9f_0235 | bracket | 2 | 1,177,328,799 | mirror_x | 1 | 85d3cee3668b630e | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 30800,
"surface_area": 10000,
"principal_moments": [
6480000,
16199999.999999998,
16699999.999999998
],
"n_faces": 14,
"n_edges": 37,
"n_vertices": 24
} | {
"lines": [
"L-bracket: base leg 56.75 mm, vertical leg 55.2 mm, 35 mm wide, 8 mm thick; 1 × Ø3.2 mm hole per leg; 7.3 mm corner gusset."
],
"text": "L-bracket: base leg 56.75 mm, vertical leg 55.2 mm, 35 mm wide, 8 mm thick; 1 × Ø3.2 mm hole per leg; 7.3 mm corner gusset."
} | {
"base_len": {
"type": "float",
"default": 56.75,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Base leg length (mm)"
},
"vert_len": {
"type": "float",
"default": 55.2,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Vertical leg l... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328799 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_len": {"type": 'float', "default": 56.75, "min": 25.0, "max": 90.0, "step": 1.0, "group": 'Body', "label": 'Base leg length (mm)'},
"vert_len": {"type": 'float', "def... |
block_462c9ca0_0236 | block | 2 | 1,177,328,800 | mirror_xy | 3 | 1dc5c96ebea59f76 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 274000,
"surface_area": 40200,
"principal_moments": [
204000000,
263000000,
392000000
],
"n_faces": 15,
"n_edges": 36,
"n_vertices": 24
} | {
"lines": [
"Rectangular body, 81.51 × 38.8 × 99 mm (W×D×H).",
"Four Ø3.2 mm holes at the corners, 57.057 × 27.16 mm spacing.",
"Pocket 37 × 17.1 mm, 56.9 mm deep, in top face."
],
"text": "Rectangular body, 81.51 × 38.8 × 99 mm (W×D×H). Four Ø3.2 mm holes at the corners, 57.057 × 27.16 mm spacing. P... | {
"block_w": {
"type": "float",
"default": 81.51,
"min": 15,
"max": 100,
"step": 1,
"group": "Body",
"label": "Block width (mm)"
},
"block_d": {
"type": "float",
"default": 38.8,
"min": 6,
"max": 100,
"step": 1,
"group": "Body",
"label": "Block depth (mm)"
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328800 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"block_w": {"type": 'float', "default": 81.51, "min": 15.0, "max": 100.0, "step": 1.0, "group": 'Body', "label": 'Block width (mm)'},
"block_d": {"type": 'float', "default"... |
plate_462c9ca1_0237 | plate | 1 | 1,177,328,801 | radial | 2 | e15a9f30f68859db | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 12900,
"surface_area": 5690,
"principal_moments": [
882000,
6530000,
7340000
],
"n_faces": 8,
"n_edges": 18,
"n_vertices": 12
} | {
"lines": [
"Rectangular body, 77.7 × 27.9 × 6 mm (W×D×H).",
"Eight Ø3.2 mm holes on a Ø46.6 mm bolt circle."
],
"text": "Rectangular body, 77.7 × 27.9 × 6 mm (W×D×H). Eight Ø3.2 mm holes on a Ø46.6 mm bolt circle."
} | {
"plate_w": {
"type": "float",
"default": 77.7,
"min": 20,
"max": 120,
"step": 1,
"group": "Body",
"label": "Plate width (mm)"
},
"plate_d": {
"type": "float",
"default": 27.9,
"min": 8,
"max": 120,
"step": 1,
"group": "Body",
"label": "Plate depth (mm)"
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328801 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"plate_w": {"type": 'float', "default": 77.7, "min": 20.0, "max": 120.0, "step": 1.0, "group": 'Body', "label": 'Plate width (mm)'},
"plate_d": {"type": 'float', "default":... |
compound_462c9ca2_0238 | compound | 2 | 1,177,328,802 | none | 2 | bdd23bb278ca2b31 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 28700,
"surface_area": 8630,
"principal_moments": [
4460000,
8520000,
8520000
],
"n_faces": 13,
"n_edges": 30,
"n_vertices": 20
} | {
"lines": [
"8-sided polygon section, 40 mm across corners, extruded 19.3 mm thick.",
"Ø20.1 mm circular section attachment, 36.8 mm long, from top face with a Ø10.5 mm bore."
],
"text": "8-sided polygon section, 40 mm across corners, extruded 19.3 mm thick. Ø20.1 mm circular section attachment, 36.8 mm ... | {
"base_sides": {
"type": "int",
"default": 8,
"min": 3,
"max": 8,
"step": 1,
"group": "Base",
"label": "Base sides"
},
"base_r": {
"type": "float",
"default": 20,
"min": 12,
"max": 32,
"step": 1,
"group": "Base",
"label": "Base circumradius (mm)"
},
"ba... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328802 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_sides": {"type": 'int', "default": 8, "min": 3, "max": 8, "step": 1, "group": 'Base', "label": 'Base sides'},
"base_r": {"type": 'float', "default": 20, "min": 12.0, ... |
threaded_462c9ca3_0239 | threaded | 2 | 1,177,328,803 | mirror_xy | 1 | 8e1552cbd4191c1b | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 14000,
"surface_area": 6880,
"principal_moments": [
1030000,
3610000,
3610000
],
"n_faces": 351,
"n_edges": 987,
"n_vertices": 638
} | {
"lines": [
"M12x1.75 internal thread, 51.6 mm long."
],
"text": "M12x1.75 internal thread, 51.6 mm long."
} | {
"major_d": {
"type": "float",
"default": 12,
"min": 4,
"max": 24,
"step": 0.5,
"group": "Thread",
"label": "Major diameter (mm)"
},
"pitch": {
"type": "float",
"default": 1.75,
"min": 0.88,
"max": 3.5,
"step": 0.05,
"group": "Thread",
"label": "Pitch (mm)"... | import cadquery as cq
from bd_warehouse import thread as _bdt
import build123d as _bd
# Generated by CadQuarry v0.6.0 — seed 1177328803 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"major_d": {"type": 'float', "default": 12.0, "min": 4.0, "max": 24.0, "step": 0.5, "group": 'Thread', "label": ... |
swept_462c9ca4_0240 | swept | 2 | 1,177,328,804 | mirror_xy | 1 | 91e3b6026bdc5f1b | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 19600,
"surface_area": 5070,
"principal_moments": [
882000,
11899999.999999998,
12099999.999999998
],
"n_faces": 3,
"n_edges": 3,
"n_vertices": 2
} | {
"lines": [
"Ø17 mm circular section swept along a curved path, ~78.91 mm span."
],
"text": "Ø17 mm circular section swept along a curved path, ~78.91 mm span."
} | {
"path_w": {
"type": "float",
"default": 75,
"min": 37.5,
"max": 135,
"step": 1,
"group": "Path",
"label": "Path width (mm)"
},
"path_h": {
"type": "float",
"default": 78.91,
"min": 39.5,
"max": 142,
"step": 1,
"group": "Path",
"label": "Path length (mm)"
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328804 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"path_w": {"type": 'float', "default": 75, "min": 37.5, "max": 135.0, "step": 1.0, "group": 'Path', "label": 'Path width (mm)'},
"path_h": {"type": 'float', "default": 78.9... |
flanged_462c9ca5_0241 | flanged | 1 | 1,177,328,805 | none | 2 | 6377bb38f6d59ab5 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 91500,
"surface_area": 24100,
"principal_moments": [
56699999.99999999,
56699999.99999999,
58499999.99999999
],
"n_faces": 12,
"n_edges": 27,
"n_vertices": 18
} | {
"lines": [
"Revolved body, Ø38.77 mm × 55.8 mm tall with Ø16.2 mm bore, Ø92 mm × 6.9 mm flange.",
"Six Ø4.3 mm holes on a Ø55.2 mm bolt circle."
],
"text": "Revolved body, Ø38.77 mm × 55.8 mm tall with Ø16.2 mm bore, Ø92 mm × 6.9 mm flange. Six Ø4.3 mm holes on a Ø55.2 mm bolt circle."
} | {
"outer_d": {
"type": "float",
"default": 38.77,
"min": 20,
"max": 100,
"step": 1,
"group": "Body",
"label": "Outer diameter (mm)"
},
"length": {
"type": "float",
"default": 55.8,
"min": 16.7,
"max": 139.5,
"step": 1,
"group": "Body",
"label": "Length (mm)"... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328805 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"outer_d": {"type": 'float', "default": 38.77, "min": 20.0, "max": 100.0, "step": 1.0, "group": 'Body', "label": 'Outer diameter (mm)'},
"length": {"type": 'float', "defaul... |
revolved_462c9ca6_0242 | revolved | 1 | 1,177,328,806 | mirror_xy | 1 | 8de9405def4bb0e8 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 651,
"surface_area": 780,
"principal_moments": [
6290,
18200,
18200
],
"n_faces": 5,
"n_edges": 7,
"n_vertices": 5
} | {
"lines": [
"Revolved body, Ø6 mm × 21 mm tall with Ø9.7 mm × 5.6 mm flange."
],
"text": "Revolved body, Ø6 mm × 21 mm tall with Ø9.7 mm × 5.6 mm flange."
} | {
"outer_d": {
"type": "float",
"default": 6,
"min": 6,
"max": 80,
"step": 1,
"group": "Body",
"label": "Outer diameter (mm)"
},
"length": {
"type": "float",
"default": 21,
"min": 6.3,
"max": 63,
"step": 1,
"group": "Body",
"label": "Length (mm)"
},
"fla... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328806 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"outer_d": {"type": 'float', "default": 6.0, "min": 6.0, "max": 80.0, "step": 1.0, "group": 'Body', "label": 'Outer diameter (mm)'},
"length": {"type": 'float', "default": ... |
plate_462c9ca7_0243 | plate | 1 | 1,177,328,807 | mirror_xy | 2 | 39bbce482cf84648 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 46500,
"surface_area": 12700,
"principal_moments": [
8070000,
43000000,
50299999.99999999
],
"n_faces": 10,
"n_edges": 24,
"n_vertices": 16
} | {
"lines": [
"Rectangular body, 105 × 44.6 × 10 mm (W×D×H).",
"Four Ø3.2 mm holes at the corners, 73.5 × 31.22 mm spacing."
],
"text": "Rectangular body, 105 × 44.6 × 10 mm (W×D×H). Four Ø3.2 mm holes at the corners, 73.5 × 31.22 mm spacing."
} | {
"plate_w": {
"type": "float",
"default": 105,
"min": 20,
"max": 120,
"step": 1,
"group": "Body",
"label": "Plate width (mm)"
},
"plate_d": {
"type": "float",
"default": 44.6,
"min": 8,
"max": 120,
"step": 1,
"group": "Body",
"label": "Plate depth (mm)"
}... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328807 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"plate_w": {"type": 'float', "default": 105, "min": 20.0, "max": 120.0, "step": 1.0, "group": 'Body', "label": 'Plate width (mm)'},
"plate_d": {"type": 'float', "default": ... |
revolved_462c9ca8_0244 | revolved | 2 | 1,177,328,808 | radial | 2 | 4adf4d627997304c | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 6430,
"surface_area": 3830,
"principal_moments": [
285000,
1190000,
1190000
],
"n_faces": 8,
"n_edges": 14,
"n_vertices": 8
} | {
"lines": [
"Revolved body, Ø16.42 mm × 44.3 mm tall with Ø9.2 mm bore.",
"Chamfer 0.3 mm on the >Z or <Z edges."
],
"text": "Revolved body, Ø16.42 mm × 44.3 mm tall with Ø9.2 mm bore. Chamfer 0.3 mm on the >Z or <Z edges."
} | {
"outer_d": {
"type": "float",
"default": 16.42,
"min": 6,
"max": 80,
"step": 1,
"group": "Body",
"label": "Outer diameter (mm)"
},
"length": {
"type": "float",
"default": 44.3,
"min": 13.3,
"max": 132.9,
"step": 1,
"group": "Body",
"label": "Length (mm)"
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328808 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"outer_d": {"type": 'float', "default": 16.42, "min": 6.0, "max": 80.0, "step": 1.0, "group": 'Body', "label": 'Outer diameter (mm)'},
"length": {"type": 'float', "default"... |
compound_462c9ca9_0245 | compound | 2 | 1,177,328,809 | mirror_xy | 2 | 446a083762b88013 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 56500,
"surface_area": 9960,
"principal_moments": [
12199999.999999998,
20600000,
20600000
],
"n_faces": 9,
"n_edges": 18,
"n_vertices": 12
} | {
"lines": [
"Lofted body through 3 sections: 50 × 50 mm rectangular section → Ø41.1 mm circular section → Ø32.2 mm circular section.",
"Ø24.5 mm circular section attachment, 28.4 mm long, from top face."
],
"text": "Lofted body through 3 sections: 50 × 50 mm rectangular section → Ø41.1 mm circular sectio... | {
"adapter_base": {
"type": "float",
"default": 50,
"min": 30,
"max": 75,
"step": 1,
"group": "Body",
"label": "Base size (mm)"
},
"adapter_top": {
"type": "float",
"default": 32.2,
"min": 16.1,
"max": 50,
"step": 1,
"group": "Body",
"label": "Top size (mm)"... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328809 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"adapter_base": {"type": 'float', "default": 50, "min": 30.0, "max": 75.0, "step": 1.0, "group": 'Body', "label": 'Base size (mm)'},
"adapter_top": {"type": 'float', "defau... |
gear_462c9caa_0246 | gear | 2 | 1,177,328,810 | mirror_x | 1 | 92d87233da97d117 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 170000,
"surface_area": 30200,
"principal_moments": [
112000000,
112000000,
206000000
],
"n_faces": 131,
"n_edges": 387,
"n_vertices": 258
} | {
"lines": [
"Helical gear, module 6 mm, 16 teeth (pitch Ø96 mm), face width 25.1 mm, 11° helix, Ø16.9 mm bore."
],
"text": "Helical gear, module 6 mm, 16 teeth (pitch Ø96 mm), face width 25.1 mm, 11° helix, Ø16.9 mm bore."
} | {
"module": {
"type": "float",
"default": 6,
"min": 1,
"max": 6,
"step": 0.25,
"group": "Gear",
"label": "Module (mm)"
},
"teeth": {
"type": "int",
"default": 16,
"min": 10,
"max": 40,
"step": 1,
"group": "Gear",
"label": "Number of teeth"
},
"gear_w": {... | import cadquery as cq
import math
import py_gearworks as _gw
# Generated by CadQuarry v0.6.0 — seed 1177328810 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"module": {"type": 'float', "default": 6.0, "min": 1.0, "max": 6.0, "step": 0.25, "group": 'Gear', "label": 'Module (mm)'},
"teeth": ... |
swept_462c9cab_0247 | swept | 1 | 1,177,328,811 | mirror_xy | 1 | 88c8a3dcfc505f4a | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 23400,
"surface_area": 6350,
"principal_moments": [
1010000,
25799999.999999996,
26099999.999999996
],
"n_faces": 3,
"n_edges": 3,
"n_vertices": 2
} | {
"lines": [
"Ø16.3 mm circular section swept along a curved path, ~100.81 mm span."
],
"text": "Ø16.3 mm circular section swept along a curved path, ~100.81 mm span."
} | {
"path_w": {
"type": "float",
"default": 49.36,
"min": 24.7,
"max": 88.8,
"step": 1,
"group": "Path",
"label": "Path width (mm)"
},
"path_h": {
"type": "float",
"default": 100.81,
"min": 50.4,
"max": 181.5,
"step": 1,
"group": "Path",
"label": "Path length ... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328811 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"path_w": {"type": 'float', "default": 49.36, "min": 24.7, "max": 88.8, "step": 1.0, "group": 'Path', "label": 'Path width (mm)'},
"path_h": {"type": 'float', "default": 10... |
flanged_462c9cac_0248 | flanged | 2 | 1,177,328,812 | radial | 2 | db154cba40675cbb | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 313000,
"surface_area": 59100,
"principal_moments": [
414000000,
436000000,
436000000
],
"n_faces": 14,
"n_edges": 33,
"n_vertices": 22
} | {
"lines": [
"Revolved body, Ø71.42 mm × 84.8 mm tall with Ø37.8 mm bore, Ø139.1 mm × 6.4 mm flange.",
"Eight Ø8.4 mm holes on a Ø83.4 mm bolt circle."
],
"text": "Revolved body, Ø71.42 mm × 84.8 mm tall with Ø37.8 mm bore, Ø139.1 mm × 6.4 mm flange. Eight Ø8.4 mm holes on a Ø83.4 mm bolt circle."
} | {
"outer_d": {
"type": "float",
"default": 71.42,
"min": 20,
"max": 100,
"step": 1,
"group": "Body",
"label": "Outer diameter (mm)"
},
"length": {
"type": "float",
"default": 84.8,
"min": 25.4,
"max": 212,
"step": 1,
"group": "Body",
"label": "Length (mm)"
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328812 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"outer_d": {"type": 'float', "default": 71.42, "min": 20.0, "max": 100.0, "step": 1.0, "group": 'Body', "label": 'Outer diameter (mm)'},
"length": {"type": 'float', "defaul... |
plate_462c9cad_0249 | plate | 2 | 1,177,328,813 | radial | 3 | 431668b0ac46dddc | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 10200,
"surface_area": 3970,
"principal_moments": [
441000,
2670000,
2940000
],
"n_faces": 28,
"n_edges": 78,
"n_vertices": 52
} | {
"lines": [
"Rectangular body, 55 × 20.3 × 10 mm (W×D×H).",
"Eight Ø6.4 mm holes on a Ø33 mm bolt circle.",
"Fillet radius 1.319 mm on vertical edges."
],
"text": "Rectangular body, 55 × 20.3 × 10 mm (W×D×H). Eight Ø6.4 mm holes on a Ø33 mm bolt circle. Fillet radius 1.319 mm on vertical edges."
} | {
"plate_w": {
"type": "float",
"default": 55,
"min": 20,
"max": 120,
"step": 1,
"group": "Body",
"label": "Plate width (mm)"
},
"plate_d": {
"type": "float",
"default": 20.3,
"min": 8,
"max": 120,
"step": 1,
"group": "Body",
"label": "Plate depth (mm)"
},... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328813 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"plate_w": {"type": 'float', "default": 55, "min": 20.0, "max": 120.0, "step": 1.0, "group": 'Body', "label": 'Plate width (mm)'},
"plate_d": {"type": 'float', "default": 2... |
revolved_462c9cae_0250 | revolved | 0 | 1,177,328,814 | radial | 1 | 64b24a6983459626 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 340000,
"surface_area": 58200,
"principal_moments": [
154000000,
1010000000,
1010000000
],
"n_faces": 3,
"n_edges": 4,
"n_vertices": 3
} | {
"lines": [
"Revolved body, Ø54.94 mm × 214.9 mm tall."
],
"text": "Revolved body, Ø54.94 mm × 214.9 mm tall."
} | {
"outer_d": {
"type": "float",
"default": 54.94,
"min": 6,
"max": 80,
"step": 1,
"group": "Body",
"label": "Outer diameter (mm)"
},
"length": {
"type": "float",
"default": 214.9,
"min": 64.5,
"max": 320,
"step": 1,
"group": "Body",
"label": "Length (mm)"
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328814 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"outer_d": {"type": 'float', "default": 54.94, "min": 6.0, "max": 80.0, "step": 1.0, "group": 'Body', "label": 'Outer diameter (mm)'},
"length": {"type": 'float', "default"... |
tapped_462c9caf_0251 | tapped | 2 | 1,177,328,815 | mirror_xy | 1 | 6fc851b26e63fce3 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 1360,
"surface_area": 922,
"principal_moments": [
27900,
31600,
31600
],
"n_faces": 148,
"n_edges": 402,
"n_vertices": 256
} | {
"lines": [
"One M4x0.7 tapped hole in a cylinder."
],
"text": "One M4x0.7 tapped hole in a cylinder."
} | {
"major_d": {
"type": "float",
"default": 4,
"min": 3,
"max": 24,
"step": 0.5,
"group": "Thread",
"label": "Thread major Ø (mm)"
},
"pitch": {
"type": "float",
"default": 0.7000000000000001,
"min": 0.35000000000000003,
"max": 3.5,
"step": 0.05,
"group": "Thread... | import cadquery as cq
from bd_warehouse import thread as _bdt
import build123d as _bd
# Generated by CadQuarry v0.6.0 — seed 1177328815 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"major_d": {"type": 'float', "default": 4.0, "min": 3.0, "max": 24.0, "step": 0.5, "group": 'Thread', "label": '... |
lofted_462c9cb0_0252 | lofted | 1 | 1,177,328,816 | mirror_x | 2 | 95f340a97edc3984 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 57500,
"surface_area": 10900,
"principal_moments": [
16399999.999999998,
16399999.999999998,
17000000
],
"n_faces": 9,
"n_edges": 21,
"n_vertices": 14
} | {
"lines": [
"Lofted body through 2 sections: Ø51.95 mm circular section → 6-sided polygon section, 41.5 mm across corners.",
"One Ø16.2 mm hole in a 1×1 grid, 10 × 10 mm pitch."
],
"text": "Lofted body through 2 sections: Ø51.95 mm circular section → 6-sided polygon section, 41.5 mm across corners. One Ø... | {
"loft_base": {
"type": "float",
"default": 51.95,
"min": 26,
"max": 83.1,
"step": 1,
"group": "Body",
"label": "Base size (mm)"
},
"loft_top": {
"type": "float",
"default": 41.5,
"min": 16.6,
"max": 62.3,
"step": 1,
"group": "Body",
"label": "Top size (mm)... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328816 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"loft_base": {"type": 'float', "default": 51.95, "min": 26.0, "max": 83.1, "step": 1.0, "group": 'Body', "label": 'Base size (mm)'},
"loft_top": {"type": 'float', "default"... |
ribbed_462c9cb1_0253 | ribbed | 2 | 1,177,328,817 | none | 2 | 296dd85d9894bf6c | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 6650,
"surface_area": 4640,
"principal_moments": [
582000,
782000,
926000
],
"n_faces": 30,
"n_edges": 72,
"n_vertices": 44
} | {
"lines": [
"Rectangular body, 30.16 × 16.3 × 8 mm (W×D×H).",
"Three ribs, 2.1 mm thick, 17.9 mm tall."
],
"text": "Rectangular body, 30.16 × 16.3 × 8 mm (W×D×H). Three ribs, 2.1 mm thick, 17.9 mm tall."
} | {
"base_w": {
"type": "float",
"default": 30.16,
"min": 20,
"max": 120,
"step": 1,
"group": "Base",
"label": "Base width (mm)"
},
"base_d": {
"type": "float",
"default": 16.3,
"min": 15,
"max": 120,
"step": 1,
"group": "Base",
"label": "Base depth (mm)"
},... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328817 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_w": {"type": 'float', "default": 30.16, "min": 20.0, "max": 120.0, "step": 1.0, "group": 'Base', "label": 'Base width (mm)'},
"base_d": {"type": 'float', "default": 1... |
bracket_462c9cb2_0254 | bracket | 2 | 1,177,328,818 | none | 1 | 5b63b992fde62d39 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 26000,
"surface_area": 9320,
"principal_moments": [
6690000,
12599999.999999998,
16499999.999999998
],
"n_faces": 13,
"n_edges": 33,
"n_vertices": 22
} | {
"lines": [
"C-channel bracket: base leg 55 mm, vertical leg 46.3 mm, 25 mm wide, 8 mm thick; 1 × Ø4.3 mm hole per leg; 10.8 mm corner gusset."
],
"text": "C-channel bracket: base leg 55 mm, vertical leg 46.3 mm, 25 mm wide, 8 mm thick; 1 × Ø4.3 mm hole per leg; 10.8 mm corner gusset."
} | {
"base_len": {
"type": "float",
"default": 55,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Base leg length (mm)"
},
"vert_len": {
"type": "float",
"default": 46.3,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Vertical leg leng... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328818 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_len": {"type": 'float', "default": 55, "min": 25.0, "max": 90.0, "step": 1.0, "group": 'Body', "label": 'Base leg length (mm)'},
"vert_len": {"type": 'float', "defaul... |
compound_462c9cb3_0255 | compound | 3 | 1,177,328,819 | mirror_xy | 3 | 15dc4873539f1fb5 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 34400,
"surface_area": 7520,
"principal_moments": [
6880000,
8180000,
8270000
],
"n_faces": 14,
"n_edges": 33,
"n_vertices": 22
} | {
"lines": [
"5-sided polygon section, 53.26 mm across corners, extruded 13.6 mm thick.",
"Ø22.5 mm circular section attachment, 29 mm long, from top face.",
"Fillet radius 1.91 mm on vertical edges."
],
"text": "5-sided polygon section, 53.26 mm across corners, extruded 13.6 mm thick. Ø22.5 mm circul... | {
"base_sides": {
"type": "int",
"default": 5,
"min": 3,
"max": 8,
"step": 1,
"group": "Base",
"label": "Base sides"
},
"base_r": {
"type": "float",
"default": 26.63,
"min": 16,
"max": 42.6,
"step": 1,
"group": "Base",
"label": "Base circumradius (mm)"
},
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328819 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_sides": {"type": 'int', "default": 5, "min": 3, "max": 8, "step": 1, "group": 'Base', "label": 'Base sides'},
"base_r": {"type": 'float', "default": 26.63, "min": 16.... |
lofted_462c9cb4_0256 | lofted | 1 | 1,177,328,820 | none | 2 | aea08e90a3d7de36 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 29300,
"surface_area": 7530,
"principal_moments": [
5530000,
5530000,
6720000
],
"n_faces": 9,
"n_edges": 21,
"n_vertices": 14
} | {
"lines": [
"Lofted body through 2 sections: Ø48.47 mm circular section → 6-sided polygon section, 26.7 mm across corners.",
"One Ø15.3 mm hole in a 1×1 grid, 10 × 10 mm pitch."
],
"text": "Lofted body through 2 sections: Ø48.47 mm circular section → 6-sided polygon section, 26.7 mm across corners. One Ø... | {
"loft_base": {
"type": "float",
"default": 48.47,
"min": 24.2,
"max": 77.6,
"step": 1,
"group": "Body",
"label": "Base size (mm)"
},
"loft_top": {
"type": "float",
"default": 26.7,
"min": 10.7,
"max": 58.2,
"step": 1,
"group": "Body",
"label": "Top size (m... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328820 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"loft_base": {"type": 'float', "default": 48.47, "min": 24.2, "max": 77.6, "step": 1.0, "group": 'Body', "label": 'Base size (mm)'},
"loft_top": {"type": 'float', "default"... |
lofted_462c9cb5_0257 | lofted | 1 | 1,177,328,821 | none | 2 | 5e06e5c9a89586da | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 88500,
"surface_area": 16100,
"principal_moments": [
36100000,
36100000,
45100000
],
"n_faces": 8,
"n_edges": 18,
"n_vertices": 12
} | {
"lines": [
"Lofted body through 2 sections: 60 × 60 mm rectangular section → Ø42.7 mm circular section.",
"One Ø24.5 mm hole in a 1×1 grid, 10 × 10 mm pitch."
],
"text": "Lofted body through 2 sections: 60 × 60 mm rectangular section → Ø42.7 mm circular section. One Ø24.5 mm hole in a 1×1 grid, 10 × 10 ... | {
"loft_base": {
"type": "float",
"default": 60,
"min": 30,
"max": 96,
"step": 1,
"group": "Body",
"label": "Base size (mm)"
},
"loft_top": {
"type": "float",
"default": 42.7,
"min": 17.1,
"max": 72,
"step": 1,
"group": "Body",
"label": "Top size (mm)"
},
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328821 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"loft_base": {"type": 'float', "default": 60, "min": 30.0, "max": 96.0, "step": 1.0, "group": 'Body', "label": 'Base size (mm)'},
"loft_top": {"type": 'float', "default": 4... |
swept_462c9cb6_0258 | swept | 1 | 1,177,328,822 | none | 1 | a89e070c2779ac31 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 28700,
"surface_area": 7390,
"principal_moments": [
3110000,
18400000,
20500000
],
"n_faces": 6,
"n_edges": 12,
"n_vertices": 8
} | {
"lines": [
"19.6 × 15 mm rectangular section swept along a curved path, ~80 mm span."
],
"text": "19.6 × 15 mm rectangular section swept along a curved path, ~80 mm span."
} | {
"path_w": {
"type": "float",
"default": 60,
"min": 30,
"max": 108,
"step": 1,
"group": "Path",
"label": "Path width (mm)"
},
"path_h": {
"type": "float",
"default": 80,
"min": 40,
"max": 144,
"step": 1,
"group": "Path",
"label": "Path length (mm)"
},
"... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328822 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"path_w": {"type": 'float', "default": 60, "min": 30.0, "max": 108.0, "step": 1.0, "group": 'Path', "label": 'Path width (mm)'},
"path_h": {"type": 'float', "default": 80, ... |
sketched_462c9cb7_0259 | sketched | 1 | 1,177,328,823 | mirror_xy | 2 | 5b9300d381fc9ad7 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 11500,
"surface_area": 4980,
"principal_moments": [
865000,
3920000,
4720000
],
"n_faces": 10,
"n_edges": 24,
"n_vertices": 16
} | {
"lines": [
"freeform sketched section (7 segments: 4 straight, 3 curves), ~74.025 × 36.69 mm, extruded 6 mm thick.",
"One Ø4.3 mm hole in a 1×1 grid, 10 × 10 mm pitch."
],
"text": "freeform sketched section (7 segments: 4 straight, 3 curves), ~74.025 × 36.69 mm, extruded 6 mm thick. One Ø4.3 mm hole in ... | {
"sk_w": {
"type": "float",
"default": 90,
"min": 45,
"max": 162,
"step": 1,
"group": "Sketch",
"label": "Sketch width (mm)"
},
"sk_h": {
"type": "float",
"default": 45.38,
"min": 22.7,
"max": 81.7,
"step": 1,
"group": "Sketch",
"label": "Sketch height (mm)... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328823 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"sk_w": {"type": 'float', "default": 90.0, "min": 45.0, "max": 162.0, "step": 1.0, "group": 'Sketch', "label": 'Sketch width (mm)'},
"sk_h": {"type": 'float', "default": 45... |
bracket_462c9cb8_0260 | bracket | 1 | 1,177,328,824 | none | 1 | 9a8cea67c833a13b | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 46000,
"surface_area": 14400,
"principal_moments": [
16399999.999999998,
32799999.999999996,
35700000
],
"n_faces": 10,
"n_edges": 24,
"n_vertices": 16
} | {
"lines": [
"L-bracket: base leg 60 mm, vertical leg 64 mm, 50 mm wide, 8 mm thick; 1 × Ø5.3 mm hole per leg."
],
"text": "L-bracket: base leg 60 mm, vertical leg 64 mm, 50 mm wide, 8 mm thick; 1 × Ø5.3 mm hole per leg."
} | {
"base_len": {
"type": "float",
"default": 60,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Base leg length (mm)"
},
"vert_len": {
"type": "float",
"default": 64,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Vertical leg length... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328824 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_len": {"type": 'float', "default": 60, "min": 25.0, "max": 90.0, "step": 1.0, "group": 'Body', "label": 'Base leg length (mm)'},
"vert_len": {"type": 'float', "defaul... |
revolved_462c9cb9_0261 | revolved | 2 | 1,177,328,825 | radial | 1 | a5a37d476bd8f304 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 182000,
"surface_area": 36500,
"principal_moments": [
60699999.99999999,
292000000,
292000000
],
"n_faces": 3,
"n_edges": 4,
"n_vertices": 3
} | {
"lines": [
"Revolved body, Ø47.19 mm × 155.8 mm tall."
],
"text": "Revolved body, Ø47.19 mm × 155.8 mm tall."
} | {
"outer_d": {
"type": "float",
"default": 47.19,
"min": 6,
"max": 80,
"step": 1,
"group": "Body",
"label": "Outer diameter (mm)"
},
"length": {
"type": "float",
"default": 155.8,
"min": 46.7,
"max": 320,
"step": 1,
"group": "Body",
"label": "Length (mm)"
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328825 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"outer_d": {"type": 'float', "default": 47.19, "min": 6.0, "max": 80.0, "step": 1.0, "group": 'Body', "label": 'Outer diameter (mm)'},
"length": {"type": 'float', "default"... |
bracket_462c9cba_0262 | bracket | 2 | 1,177,328,826 | none | 1 | f9e4735ce02fcbbe | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 34200,
"surface_area": 13800,
"principal_moments": [
11100000,
37000000,
43600000
],
"n_faces": 15,
"n_edges": 49,
"n_vertices": 30
} | {
"lines": [
"L-bracket: base leg 81.74 mm, vertical leg 90 mm, 30 mm wide, 6 mm thick; 1 × Ø6.4 mm hole per leg; 6.2 mm corner gusset."
],
"text": "L-bracket: base leg 81.74 mm, vertical leg 90 mm, 30 mm wide, 6 mm thick; 1 × Ø6.4 mm hole per leg; 6.2 mm corner gusset."
} | {
"base_len": {
"type": "float",
"default": 81.74,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Base leg length (mm)"
},
"vert_len": {
"type": "float",
"default": 90,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Vertical leg len... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328826 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_len": {"type": 'float', "default": 81.74, "min": 25.0, "max": 90.0, "step": 1.0, "group": 'Body', "label": 'Base leg length (mm)'},
"vert_len": {"type": 'float', "def... |
threaded_462c9cbb_0263 | threaded | 3 | 1,177,328,827 | mirror_x | 1 | ff4ef533fb98d585 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 10500,
"surface_area": 4870,
"principal_moments": [
289000,
3370000,
3370000
],
"n_faces": 542,
"n_edges": 1492,
"n_vertices": 952
} | {
"lines": [
"M16x2 external thread, 61 mm long."
],
"text": "M16x2 external thread, 61 mm long."
} | {
"major_d": {
"type": "float",
"default": 16,
"min": 4,
"max": 24,
"step": 0.5,
"group": "Thread",
"label": "Major diameter (mm)"
},
"pitch": {
"type": "float",
"default": 2,
"min": 1,
"max": 4,
"step": 0.05,
"group": "Thread",
"label": "Pitch (mm)"
},
... | import cadquery as cq
from bd_warehouse import thread as _bdt
import build123d as _bd
# Generated by CadQuarry v0.6.0 — seed 1177328827 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"major_d": {"type": 'float', "default": 16.0, "min": 4.0, "max": 24.0, "step": 0.5, "group": 'Thread', "label": ... |
compound_462c9cbc_0264 | compound | 3 | 1,177,328,828 | mirror_x | 4 | 03daaaa2fc4d7d62 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 141000,
"surface_area": 18800,
"principal_moments": [
26599999.999999996,
227000000,
227000000
],
"n_faces": 13,
"n_edges": 26,
"n_vertices": 17
} | {
"lines": [
"Ø42.12 mm circular section, extruded 80 mm thick.",
"Ø22.8 mm circular section attachment, 66.5 mm long, from top face.",
"6-sided polygon section, 17.2 mm across corners attachment, 14.4 mm long, from top face.",
"Chamfer 0.8 mm on bottom edges."
],
"text": "Ø42.12 mm circular secti... | {
"shaft_d": {
"type": "float",
"default": 42.12,
"min": 21.1,
"max": 75.8,
"step": 1,
"group": "Body",
"label": "Shaft diameter (mm)"
},
"shaft_len": {
"type": "float",
"default": 80,
"min": 32,
"max": 160,
"step": 1,
"group": "Body",
"label": "Shaft length... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328828 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"shaft_d": {"type": 'float', "default": 42.12, "min": 21.1, "max": 75.8, "step": 1.0, "group": 'Body', "label": 'Shaft diameter (mm)'},
"shaft_len": {"type": 'float', "defa... |
swept_462c9cbd_0265 | swept | 1 | 1,177,328,829 | mirror_xy | 1 | eab830e6796ca68b | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 18700,
"surface_area": 4740,
"principal_moments": [
909000,
8690000,
8870000
],
"n_faces": 3,
"n_edges": 3,
"n_vertices": 2
} | {
"lines": [
"Ø17.6 mm circular section swept along a curved path, ~70 mm span."
],
"text": "Ø17.6 mm circular section swept along a curved path, ~70 mm span."
} | {
"path_w": {
"type": "float",
"default": 70,
"min": 35,
"max": 126,
"step": 1,
"group": "Path",
"label": "Path width (mm)"
},
"path_h": {
"type": "float",
"default": 55,
"min": 27.5,
"max": 99,
"step": 1,
"group": "Path",
"label": "Path length (mm)"
},
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328829 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"path_w": {"type": 'float', "default": 70, "min": 35.0, "max": 126.0, "step": 1.0, "group": 'Path', "label": 'Path width (mm)'},
"path_h": {"type": 'float', "default": 55, ... |
ribbed_462c9cbe_0266 | ribbed | 2 | 1,177,328,830 | mirror_x | 2 | 0b4f8e79e5f4ad7a | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 10800,
"surface_area": 6200,
"principal_moments": [
1470000,
3370000,
4220000
],
"n_faces": 22,
"n_edges": 52,
"n_vertices": 32
} | {
"lines": [
"Rectangular body, 47.07 × 33.3 × 3 mm (W×D×H).",
"Two ribs, 5.7 mm thick, 14.3 mm tall."
],
"text": "Rectangular body, 47.07 × 33.3 × 3 mm (W×D×H). Two ribs, 5.7 mm thick, 14.3 mm tall."
} | {
"base_w": {
"type": "float",
"default": 47.07,
"min": 20,
"max": 120,
"step": 1,
"group": "Base",
"label": "Base width (mm)"
},
"base_d": {
"type": "float",
"default": 33.3,
"min": 15,
"max": 120,
"step": 1,
"group": "Base",
"label": "Base depth (mm)"
},... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328830 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_w": {"type": 'float', "default": 47.07, "min": 20.0, "max": 120.0, "step": 1.0, "group": 'Base', "label": 'Base width (mm)'},
"base_d": {"type": 'float', "default": 3... |
flanged_462c9cbf_0267 | flanged | 2 | 1,177,328,831 | radial | 2 | b8990d1bacd33158 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 34000,
"surface_area": 14200,
"principal_moments": [
9100000,
12599999.999999998,
12599999.999999998
],
"n_faces": 29,
"n_edges": 114,
"n_vertices": 76
} | {
"lines": [
"Revolved body, Ø33.16 mm × 48.6 mm tall with Ø15.5 mm bore, Ø62.1 mm × 4.5 mm flange.",
"Twelve Ø8.4 mm holes on a Ø37.2 mm bolt circle."
],
"text": "Revolved body, Ø33.16 mm × 48.6 mm tall with Ø15.5 mm bore, Ø62.1 mm × 4.5 mm flange. Twelve Ø8.4 mm holes on a Ø37.2 mm bolt circle."
} | {
"outer_d": {
"type": "float",
"default": 33.16,
"min": 20,
"max": 100,
"step": 1,
"group": "Body",
"label": "Outer diameter (mm)"
},
"length": {
"type": "float",
"default": 48.6,
"min": 14.6,
"max": 121.5,
"step": 1,
"group": "Body",
"label": "Length (mm)"... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328831 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"outer_d": {"type": 'float', "default": 33.16, "min": 20.0, "max": 100.0, "step": 1.0, "group": 'Body', "label": 'Outer diameter (mm)'},
"length": {"type": 'float', "defaul... |
lofted_462c9cc0_0268 | lofted | 0 | 1,177,328,832 | none | 1 | 3120446f47516801 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 13100,
"surface_area": 3170,
"principal_moments": [
1010000,
1360000,
1360000
],
"n_faces": 8,
"n_edges": 18,
"n_vertices": 12
} | {
"lines": [
"Lofted body through 2 sections: 6-sided polygon section, 31.4 mm across corners → Ø19.7 mm circular section."
],
"text": "Lofted body through 2 sections: 6-sided polygon section, 31.4 mm across corners → Ø19.7 mm circular section."
} | {
"loft_base": {
"type": "float",
"default": 31.4,
"min": 15.7,
"max": 50.2,
"step": 1,
"group": "Body",
"label": "Base size (mm)"
},
"loft_top": {
"type": "float",
"default": 19.7,
"min": 7.9,
"max": 37.7,
"step": 1,
"group": "Body",
"label": "Top size (mm)... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328832 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"loft_base": {"type": 'float', "default": 31.4, "min": 15.7, "max": 50.2, "step": 1.0, "group": 'Body', "label": 'Base size (mm)'},
"loft_top": {"type": 'float', "default":... |
swept_462c9cc1_0269 | swept | 1 | 1,177,328,833 | mirror_xy | 1 | d864f93e8083ce44 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 10600,
"surface_area": 4160,
"principal_moments": [
557000,
4030000,
4260000
],
"n_faces": 6,
"n_edges": 12,
"n_vertices": 8
} | {
"lines": [
"18.7 × 13.5 mm rectangular section swept along a curved path, ~65 mm span."
],
"text": "18.7 × 13.5 mm rectangular section swept along a curved path, ~65 mm span."
} | {
"path_w": {
"type": "float",
"default": 57.23,
"min": 28.6,
"max": 103,
"step": 1,
"group": "Path",
"label": "Path width (mm)"
},
"path_h": {
"type": "float",
"default": 65,
"min": 32.5,
"max": 117,
"step": 1,
"group": "Path",
"label": "Path length (mm)"
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328833 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"path_w": {"type": 'float', "default": 57.23, "min": 28.6, "max": 103.0, "step": 1.0, "group": 'Path', "label": 'Path width (mm)'},
"path_h": {"type": 'float', "default": 6... |
flanged_462c9cc2_0270 | flanged | 1 | 1,177,328,834 | mirror_xy | 2 | b6060f6c2b4de8f8 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 76600,
"surface_area": 23100,
"principal_moments": [
39100000,
39100000,
60699999.99999999
],
"n_faces": 18,
"n_edges": 45,
"n_vertices": 30
} | {
"lines": [
"Revolved body, Ø42.69 mm × 35.3 mm tall with Ø16.5 mm bore, Ø99.1 mm × 5.5 mm flange.",
"Twelve Ø4.3 mm holes on a Ø59.4 mm bolt circle."
],
"text": "Revolved body, Ø42.69 mm × 35.3 mm tall with Ø16.5 mm bore, Ø99.1 mm × 5.5 mm flange. Twelve Ø4.3 mm holes on a Ø59.4 mm bolt circle."
} | {
"outer_d": {
"type": "float",
"default": 42.69,
"min": 20,
"max": 100,
"step": 1,
"group": "Body",
"label": "Outer diameter (mm)"
},
"length": {
"type": "float",
"default": 35.3,
"min": 10.6,
"max": 88.2,
"step": 1,
"group": "Body",
"label": "Length (mm)"
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328834 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"outer_d": {"type": 'float', "default": 42.69, "min": 20.0, "max": 100.0, "step": 1.0, "group": 'Body', "label": 'Outer diameter (mm)'},
"length": {"type": 'float', "defaul... |
revolved_462c9cc3_0271 | revolved | 0 | 1,177,328,835 | mirror_xy | 1 | e2751c5e279f9d96 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 101000,
"surface_area": 25200,
"principal_moments": [
22100000,
118000000,
118000000
],
"n_faces": 3,
"n_edges": 4,
"n_vertices": 3
} | {
"lines": [
"Revolved body, Ø38.11 mm × 133.3 mm tall."
],
"text": "Revolved body, Ø38.11 mm × 133.3 mm tall."
} | {
"outer_d": {
"type": "float",
"default": 38.11,
"min": 6,
"max": 80,
"step": 1,
"group": "Body",
"label": "Outer diameter (mm)"
},
"length": {
"type": "float",
"default": 133.3,
"min": 40,
"max": 320,
"step": 1,
"group": "Body",
"label": "Length (mm)"
}
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328835 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"outer_d": {"type": 'float', "default": 38.11, "min": 6.0, "max": 80.0, "step": 1.0, "group": 'Body', "label": 'Outer diameter (mm)'},
"length": {"type": 'float', "default"... |
bracket_462c9cc4_0272 | bracket | 1 | 1,177,328,836 | mirror_x | 1 | edb0e58cbb496794 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 16000,
"surface_area": 11800,
"principal_moments": [
5760000,
7100000,
7420000
],
"n_faces": 13,
"n_edges": 33,
"n_vertices": 22
} | {
"lines": [
"C-channel bracket: base leg 40 mm, vertical leg 42.7 mm, 45 mm wide, 3 mm thick; 1 × Ø3.2 mm hole per leg."
],
"text": "C-channel bracket: base leg 40 mm, vertical leg 42.7 mm, 45 mm wide, 3 mm thick; 1 × Ø3.2 mm hole per leg."
} | {
"base_len": {
"type": "float",
"default": 40,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Base leg length (mm)"
},
"vert_len": {
"type": "float",
"default": 42.7,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Vertical leg leng... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328836 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_len": {"type": 'float', "default": 40, "min": 25.0, "max": 90.0, "step": 1.0, "group": 'Body', "label": 'Base leg length (mm)'},
"vert_len": {"type": 'float', "defaul... |
gear_462c9cc5_0273 | gear | 1 | 1,177,328,837 | mirror_xy | 1 | 7854a6421d4e06e7 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 8660,
"surface_area": 3910,
"principal_moments": [
670000,
670000,
1160000
],
"n_faces": 99,
"n_edges": 291,
"n_vertices": 194
} | {
"lines": [
"Spur gear, module 2 mm, 16 teeth (pitch Ø32 mm), face width 11.2 mm, Ø4 mm bore."
],
"text": "Spur gear, module 2 mm, 16 teeth (pitch Ø32 mm), face width 11.2 mm, Ø4 mm bore."
} | {
"module": {
"type": "float",
"default": 2,
"min": 1,
"max": 6,
"step": 0.25,
"group": "Gear",
"label": "Module (mm)"
},
"teeth": {
"type": "int",
"default": 16,
"min": 10,
"max": 40,
"step": 1,
"group": "Gear",
"label": "Number of teeth"
},
"gear_w": {... | import cadquery as cq
import math
import py_gearworks as _gw
# Generated by CadQuarry v0.6.0 — seed 1177328837 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"module": {"type": 'float', "default": 2.0, "min": 1.0, "max": 6.0, "step": 0.25, "group": 'Gear', "label": 'Module (mm)'},
"teeth": ... |
bracket_462c9cc6_0274 | bracket | 1 | 1,177,328,838 | none | 1 | 310add27ad6f62f3 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 52700,
"surface_area": 23800,
"principal_moments": [
22300000,
94499999.99999999,
97999999.99999999
],
"n_faces": 12,
"n_edges": 30,
"n_vertices": 20
} | {
"lines": [
"Z-bracket: base leg 70 mm, vertical leg 69.2 mm, top leg 67.4 mm, 53.98 mm wide, 5 mm thick; 1 × Ø6.4 mm hole per leg."
],
"text": "Z-bracket: base leg 70 mm, vertical leg 69.2 mm, top leg 67.4 mm, 53.98 mm wide, 5 mm thick; 1 × Ø6.4 mm hole per leg."
} | {
"base_len": {
"type": "float",
"default": 70,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Base leg length (mm)"
},
"vert_len": {
"type": "float",
"default": 69.2,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Vertical leg leng... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328838 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_len": {"type": 'float', "default": 70, "min": 25.0, "max": 90.0, "step": 1.0, "group": 'Body', "label": 'Base leg length (mm)'},
"vert_len": {"type": 'float', "defaul... |
profiled_462c9cc7_0275 | profiled | 0 | 1,177,328,839 | mirror_x | 1 | 14a124fa40f9aa39 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 169000,
"surface_area": 44700,
"principal_moments": [
63699999.99999999,
486000000,
486000000
],
"n_faces": 4,
"n_edges": 6,
"n_vertices": 4
} | {
"lines": [
"Revolved body, Ø45.89 mm × 179.5 mm tall with Ø30.1 mm bore."
],
"text": "Revolved body, Ø45.89 mm × 179.5 mm tall with Ø30.1 mm bore."
} | {
"outer_d": {
"type": "float",
"default": 45.89,
"min": 22.9,
"max": 91.8,
"step": 1,
"group": "Profile",
"label": "Outer diameter (mm)"
},
"length": {
"type": "float",
"default": 179.5,
"min": 53.9,
"max": 538.5,
"step": 5,
"group": "Body",
"label": "Lengt... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328839 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"outer_d": {"type": 'float', "default": 45.89, "min": 22.9, "max": 91.8, "step": 1.0, "group": 'Profile', "label": 'Outer diameter (mm)'},
"length": {"type": 'float', "defa... |
bracket_462c9cc8_0276 | bracket | 1 | 1,177,328,840 | mirror_xy | 1 | 17d7954710cdd319 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 12100,
"surface_area": 9670,
"principal_moments": [
3450000,
29799999.999999996,
32599999.999999996
],
"n_faces": 12,
"n_edges": 30,
"n_vertices": 20
} | {
"lines": [
"Z-bracket: base leg 80 mm, vertical leg 80.3 mm, top leg 87.4 mm, 16.75 mm wide, 3 mm thick; 1 × Ø4.3 mm hole per leg."
],
"text": "Z-bracket: base leg 80 mm, vertical leg 80.3 mm, top leg 87.4 mm, 16.75 mm wide, 3 mm thick; 1 × Ø4.3 mm hole per leg."
} | {
"base_len": {
"type": "float",
"default": 80,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Base leg length (mm)"
},
"vert_len": {
"type": "float",
"default": 80.3,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Vertical leg leng... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328840 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_len": {"type": 'float', "default": 80, "min": 25.0, "max": 90.0, "step": 1.0, "group": 'Body', "label": 'Base leg length (mm)'},
"vert_len": {"type": 'float', "defaul... |
flanged_462c9cc9_0277 | flanged | 1 | 1,177,328,841 | mirror_x | 2 | b2c08c86e7adf940 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 656000,
"surface_area": 78100,
"principal_moments": [
1170000000,
1340000000,
1340000000
],
"n_faces": 10,
"n_edges": 21,
"n_vertices": 14
} | {
"lines": [
"Revolved body, Ø80 mm × 108.1 mm tall with Ø31.2 mm bore, Ø154.7 mm × 14.3 mm flange.",
"Four Ø6.4 mm holes on a Ø92.8 mm bolt circle."
],
"text": "Revolved body, Ø80 mm × 108.1 mm tall with Ø31.2 mm bore, Ø154.7 mm × 14.3 mm flange. Four Ø6.4 mm holes on a Ø92.8 mm bolt circle."
} | {
"outer_d": {
"type": "float",
"default": 80,
"min": 20,
"max": 100,
"step": 1,
"group": "Body",
"label": "Outer diameter (mm)"
},
"length": {
"type": "float",
"default": 108.1,
"min": 32.4,
"max": 270.2,
"step": 1,
"group": "Body",
"label": "Length (mm)"
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328841 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"outer_d": {"type": 'float', "default": 80, "min": 20.0, "max": 100.0, "step": 1.0, "group": 'Body', "label": 'Outer diameter (mm)'},
"length": {"type": 'float', "default":... |
swept_462c9cca_0278 | swept | 0 | 1,177,328,842 | mirror_x | 1 | f5034a22f1c75f47 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 13500,
"surface_area": 5050,
"principal_moments": [
3080000,
5550000,
8310000
],
"n_faces": 3,
"n_edges": 3,
"n_vertices": 2
} | {
"lines": [
"Ø13.8 mm circular section swept along a curved path, ~68.19 mm span."
],
"text": "Ø13.8 mm circular section swept along a curved path, ~68.19 mm span."
} | {
"path_w": {
"type": "float",
"default": 56.16,
"min": 28.1,
"max": 101.1,
"step": 1,
"group": "Path",
"label": "Path width (mm)"
},
"path_h": {
"type": "float",
"default": 68.19,
"min": 34.1,
"max": 122.7,
"step": 1,
"group": "Path",
"label": "Path length ... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328842 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"path_w": {"type": 'float', "default": 56.16, "min": 28.1, "max": 101.1, "step": 1.0, "group": 'Path', "label": 'Path width (mm)'},
"path_h": {"type": 'float', "default": 6... |
compound_462c9ccb_0279 | compound | 1 | 1,177,328,843 | mirror_x | 3 | 047b908a987ad96b | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 67700,
"surface_area": 26500,
"principal_moments": [
58399999.99999999,
62999999.99999999,
87900000
],
"n_faces": 18,
"n_edges": 45,
"n_vertices": 30
} | {
"lines": [
"Rectangular body, 95 × 100.1 × 6 mm (W×D×H).",
"6-sided polygon section, 18.6 mm across corners attachment, 64.3 mm long, from top face with a Ø6.7 mm bore.",
"Four Ø8.4 mm holes at the corners, 66.5 × 70.07 mm spacing."
],
"text": "Rectangular body, 95 × 100.1 × 6 mm (W×D×H). 6-sided po... | {
"base_w": {
"type": "float",
"default": 95,
"min": 30,
"max": 160,
"step": 1,
"group": "Base",
"label": "Base width (mm)"
},
"base_d": {
"type": "float",
"default": 100.1,
"min": 25,
"max": 160,
"step": 1,
"group": "Base",
"label": "Base depth (mm)"
},
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328843 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_w": {"type": 'float', "default": 95, "min": 30.0, "max": 160.0, "step": 1.0, "group": 'Base', "label": 'Base width (mm)'},
"base_d": {"type": 'float', "default": 100.... |
bracket_462c9ccc_0280 | bracket | 3 | 1,177,328,844 | none | 1 | 4c4b249e8b321a61 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 13600,
"surface_area": 7430,
"principal_moments": [
3110000,
6850000,
9050000
],
"n_faces": 26,
"n_edges": 60,
"n_vertices": 40
} | {
"lines": [
"C-channel bracket: base leg 55 mm, vertical leg 45 mm, 20 mm wide, 5 mm thick; 2 × Ø4.3 mm holes per leg; 5.7 mm corner gusset."
],
"text": "C-channel bracket: base leg 55 mm, vertical leg 45 mm, 20 mm wide, 5 mm thick; 2 × Ø4.3 mm holes per leg; 5.7 mm corner gusset."
} | {
"base_len": {
"type": "float",
"default": 55,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Base leg length (mm)"
},
"vert_len": {
"type": "float",
"default": 45,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Vertical leg length... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328844 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_len": {"type": 'float', "default": 55, "min": 25.0, "max": 90.0, "step": 1.0, "group": 'Body', "label": 'Base leg length (mm)'},
"vert_len": {"type": 'float', "defaul... |
ribbed_462c9ccd_0281 | ribbed | 1 | 1,177,328,845 | mirror_x | 2 | cce25cdfcb02c20a | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 10800,
"surface_area": 5840,
"principal_moments": [
1440000,
2450000,
3140000
],
"n_faces": 16,
"n_edges": 36,
"n_vertices": 24
} | {
"lines": [
"Rectangular body, 40 × 36.2 × 4 mm (W×D×H).",
"Two ribs, 5 mm thick, 15.8 mm tall."
],
"text": "Rectangular body, 40 × 36.2 × 4 mm (W×D×H). Two ribs, 5 mm thick, 15.8 mm tall."
} | {
"base_w": {
"type": "float",
"default": 40,
"min": 20,
"max": 120,
"step": 1,
"group": "Base",
"label": "Base width (mm)"
},
"base_d": {
"type": "float",
"default": 36.2,
"min": 15,
"max": 120,
"step": 1,
"group": "Base",
"label": "Base depth (mm)"
},
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328845 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_w": {"type": 'float', "default": 40, "min": 20.0, "max": 120.0, "step": 1.0, "group": 'Base', "label": 'Base width (mm)'},
"base_d": {"type": 'float', "default": 36.2... |
flanged_462c9cce_0282 | flanged | 2 | 1,177,328,846 | radial | 3 | c625ccba2dcdc75c | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 131000,
"surface_area": 36800,
"principal_moments": [
115000000,
115000000,
204000000
],
"n_faces": 22,
"n_edges": 47,
"n_vertices": 28
} | {
"lines": [
"Revolved body, Ø55.37 mm × 34.6 mm tall with Ø27.1 mm bore, Ø132.4 mm × 6 mm flange.",
"Six Ø5.3 mm holes on a Ø79.4 mm bolt circle.",
"Chamfer 0.6 mm on the >Z or <Z edges."
],
"text": "Revolved body, Ø55.37 mm × 34.6 mm tall with Ø27.1 mm bore, Ø132.4 mm × 6 mm flange. Six Ø5.3 mm hole... | {
"outer_d": {
"type": "float",
"default": 55.37,
"min": 20,
"max": 100,
"step": 1,
"group": "Body",
"label": "Outer diameter (mm)"
},
"length": {
"type": "float",
"default": 34.6,
"min": 10.4,
"max": 86.5,
"step": 1,
"group": "Body",
"label": "Length (mm)"
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328846 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"outer_d": {"type": 'float', "default": 55.37, "min": 20.0, "max": 100.0, "step": 1.0, "group": 'Body', "label": 'Outer diameter (mm)'},
"length": {"type": 'float', "defaul... |
compound_462c9ccf_0283 | compound | 2 | 1,177,328,847 | mirror_x | 2 | 3120cac2b8765f3e | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 1570,
"surface_area": 1290,
"principal_moments": [
48800,
57500,
58300
],
"n_faces": 10,
"n_edges": 21,
"n_vertices": 14
} | {
"lines": [
"5-sided polygon section, 20 mm across corners, extruded 4.7 mm thick.",
"Ø8.9 mm circular section attachment, 11.9 mm long, from top face with a Ø4.7 mm bore."
],
"text": "5-sided polygon section, 20 mm across corners, extruded 4.7 mm thick. Ø8.9 mm circular section attachment, 11.9 mm long,... | {
"base_sides": {
"type": "int",
"default": 5,
"min": 3,
"max": 8,
"step": 1,
"group": "Base",
"label": "Base sides"
},
"base_r": {
"type": "float",
"default": 10,
"min": 6,
"max": 16,
"step": 1,
"group": "Base",
"label": "Base circumradius (mm)"
},
"bas... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328847 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_sides": {"type": 'int', "default": 5, "min": 3, "max": 8, "step": 1, "group": 'Base', "label": 'Base sides'},
"base_r": {"type": 'float', "default": 10.0, "min": 6.0,... |
bracket_462c9cd0_0284 | bracket | 1 | 1,177,328,848 | mirror_xy | 1 | 95f70a880b9e17c2 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 30500,
"surface_area": 14700,
"principal_moments": [
6080000,
63799999.99999999,
65399999.99999999
],
"n_faces": 12,
"n_edges": 30,
"n_vertices": 20
} | {
"lines": [
"Z-bracket: base leg 85.95 mm, vertical leg 51.9 mm, top leg 80.1 mm, 29.48 mm wide, 5 mm thick; 1 × Ø4.3 mm hole per leg."
],
"text": "Z-bracket: base leg 85.95 mm, vertical leg 51.9 mm, top leg 80.1 mm, 29.48 mm wide, 5 mm thick; 1 × Ø4.3 mm hole per leg."
} | {
"base_len": {
"type": "float",
"default": 85.95,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Base leg length (mm)"
},
"vert_len": {
"type": "float",
"default": 51.9,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Vertical leg l... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328848 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_len": {"type": 'float', "default": 85.95, "min": 25.0, "max": 90.0, "step": 1.0, "group": 'Body', "label": 'Base leg length (mm)'},
"vert_len": {"type": 'float', "def... |
bracket_462c9cd1_0285 | bracket | 3 | 1,177,328,849 | mirror_xy | 1 | ee03420f8293667a | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 60900,
"surface_area": 27200,
"principal_moments": [
48899999.99999999,
80900000,
99699999.99999999
],
"n_faces": 19,
"n_edges": 51,
"n_vertices": 34
} | {
"lines": [
"C-channel bracket: base leg 80 mm, vertical leg 73.5 mm, 55 mm wide, 5 mm thick; 1 × Ø3.2 mm hole per leg; 4.7 mm corner gusset."
],
"text": "C-channel bracket: base leg 80 mm, vertical leg 73.5 mm, 55 mm wide, 5 mm thick; 1 × Ø3.2 mm hole per leg; 4.7 mm corner gusset."
} | {
"base_len": {
"type": "float",
"default": 80,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Base leg length (mm)"
},
"vert_len": {
"type": "float",
"default": 73.5,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Vertical leg leng... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328849 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_len": {"type": 'float', "default": 80, "min": 25.0, "max": 90.0, "step": 1.0, "group": 'Body', "label": 'Base leg length (mm)'},
"vert_len": {"type": 'float', "defaul... |
tapped_462c9cd2_0286 | tapped | 2 | 1,177,328,850 | mirror_x | 1 | e4c53e80334de88c | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 11000,
"surface_area": 3660,
"principal_moments": [
946000,
946000,
1350000
],
"n_faces": 95,
"n_edges": 335,
"n_vertices": 242
} | {
"lines": [
"One M10x1.5 tapped hole in a cylinder."
],
"text": "One M10x1.5 tapped hole in a cylinder."
} | {
"major_d": {
"type": "float",
"default": 10,
"min": 3,
"max": 24,
"step": 0.5,
"group": "Thread",
"label": "Thread major Ø (mm)"
},
"pitch": {
"type": "float",
"default": 1.5,
"min": 0.35000000000000003,
"max": 3.5,
"step": 0.05,
"group": "Thread",
"label"... | import cadquery as cq
from bd_warehouse import thread as _bdt
import build123d as _bd
# Generated by CadQuarry v0.6.0 — seed 1177328850 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"major_d": {"type": 'float', "default": 10.0, "min": 3.0, "max": 24.0, "step": 0.5, "group": 'Thread', "label": ... |
bracket_462c9cd3_0287 | bracket | 1 | 1,177,328,851 | mirror_x | 1 | 01e778cb213117e7 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 46400,
"surface_area": 21000,
"principal_moments": [
17800000,
62299999.99999999,
68000000
],
"n_faces": 12,
"n_edges": 30,
"n_vertices": 20
} | {
"lines": [
"Z-bracket: base leg 59.16 mm, vertical leg 58.5 mm, top leg 62.3 mm, 55.01 mm wide, 5 mm thick; 1 × Ø6.4 mm hole per leg."
],
"text": "Z-bracket: base leg 59.16 mm, vertical leg 58.5 mm, top leg 62.3 mm, 55.01 mm wide, 5 mm thick; 1 × Ø6.4 mm hole per leg."
} | {
"base_len": {
"type": "float",
"default": 59.16,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Base leg length (mm)"
},
"vert_len": {
"type": "float",
"default": 58.5,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Vertical leg l... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328851 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_len": {"type": 'float', "default": 59.16, "min": 25.0, "max": 90.0, "step": 1.0, "group": 'Body', "label": 'Base leg length (mm)'},
"vert_len": {"type": 'float', "def... |
revolved_462c9cd4_0288 | revolved | 1 | 1,177,328,852 | none | 2 | 1788d6725a288053 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 96900,
"surface_area": 19700,
"principal_moments": [
33800000,
53099999.99999999,
53099999.99999999
],
"n_faces": 5,
"n_edges": 8,
"n_vertices": 5
} | {
"lines": [
"Revolved body, Ø48.29 mm × 79.5 mm tall.",
"Chamfer 1.4 mm on the >Z or <Z edges."
],
"text": "Revolved body, Ø48.29 mm × 79.5 mm tall. Chamfer 1.4 mm on the >Z or <Z edges."
} | {
"outer_d": {
"type": "float",
"default": 48.29,
"min": 6,
"max": 80,
"step": 1,
"group": "Body",
"label": "Outer diameter (mm)"
},
"length": {
"type": "float",
"default": 79.5,
"min": 23.8,
"max": 238.5,
"step": 1,
"group": "Body",
"label": "Length (mm)"
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328852 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"outer_d": {"type": 'float', "default": 48.29, "min": 6.0, "max": 80.0, "step": 1.0, "group": 'Body', "label": 'Outer diameter (mm)'},
"length": {"type": 'float', "default"... |
lofted_462c9cd5_0289 | lofted | 2 | 1,177,328,853 | none | 2 | 9420cab479f46a2f | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 27600,
"surface_area": 6010,
"principal_moments": [
4300000,
4550000,
4550000
],
"n_faces": 9,
"n_edges": 21,
"n_vertices": 14
} | {
"lines": [
"Lofted body through 3 sections: 6-sided polygon section, 45.56 mm across corners → Ø32.2 mm circular section → Ø18.8 mm circular section.",
"One Ø6.7 mm hole in a 1×1 grid, 10 × 10 mm pitch."
],
"text": "Lofted body through 3 sections: 6-sided polygon section, 45.56 mm across corners → Ø32.2... | {
"loft_base": {
"type": "float",
"default": 45.56,
"min": 22.8,
"max": 72.9,
"step": 1,
"group": "Body",
"label": "Base size (mm)"
},
"loft_top": {
"type": "float",
"default": 18.8,
"min": 7.5,
"max": 54.7,
"step": 1,
"group": "Body",
"label": "Top size (mm... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328853 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"loft_base": {"type": 'float', "default": 45.56, "min": 22.8, "max": 72.9, "step": 1.0, "group": 'Body', "label": 'Base size (mm)'},
"loft_top": {"type": 'float', "default"... |
swept_462c9cd6_0290 | swept | 0 | 1,177,328,854 | none | 1 | 59511bc7eff8ce1d | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 21500,
"surface_area": 5530,
"principal_moments": [
766000,
16699999.999999998,
16699999.999999998
],
"n_faces": 3,
"n_edges": 3,
"n_vertices": 2
} | {
"lines": [
"Ø16.9 mm circular section swept along a curved path, ~95.63 mm span."
],
"text": "Ø16.9 mm circular section swept along a curved path, ~95.63 mm span."
} | {
"path_w": {
"type": "float",
"default": 35,
"min": 17.5,
"max": 63,
"step": 1,
"group": "Path",
"label": "Path width (mm)"
},
"path_h": {
"type": "float",
"default": 95.63,
"min": 47.8,
"max": 172.1,
"step": 1,
"group": "Path",
"label": "Path length (mm)"
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328854 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"path_w": {"type": 'float', "default": 35, "min": 17.5, "max": 63.0, "step": 1.0, "group": 'Path', "label": 'Path width (mm)'},
"path_h": {"type": 'float', "default": 95.63... |
compound_462c9cd7_0291 | compound | 2 | 1,177,328,855 | mirror_xy | 3 | 8fca95cf0401a4cd | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 7930,
"surface_area": 3760,
"principal_moments": [
628000,
889000,
889000
],
"n_faces": 17,
"n_edges": 42,
"n_vertices": 28
} | {
"lines": [
"6-sided polygon section, 29.28 mm across corners, extruded 11.4 mm thick.",
"Ø13.6 mm circular section attachment, 21.8 mm long, from top face with a Ø7.8 mm bore.",
"Fillet radius 0.784 mm on vertical edges."
],
"text": "6-sided polygon section, 29.28 mm across corners, extruded 11.4 mm... | {
"base_sides": {
"type": "int",
"default": 6,
"min": 3,
"max": 8,
"step": 1,
"group": "Base",
"label": "Base sides"
},
"base_r": {
"type": "float",
"default": 14.64,
"min": 8.8,
"max": 23.4,
"step": 1,
"group": "Base",
"label": "Base circumradius (mm)"
},... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328855 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_sides": {"type": 'int', "default": 6, "min": 3, "max": 8, "step": 1, "group": 'Base', "label": 'Base sides'},
"base_r": {"type": 'float', "default": 14.64, "min": 8.8... |
bracket_462c9cd8_0292 | bracket | 2 | 1,177,328,856 | mirror_x | 1 | 4461f84af406bd3f | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 42500,
"surface_area": 13600,
"principal_moments": [
15599999.999999998,
16299999.999999998,
17300000
],
"n_faces": 13,
"n_edges": 33,
"n_vertices": 22
} | {
"lines": [
"C-channel bracket: base leg 38.25 mm, vertical leg 42.7 mm, 50 mm wide, 8 mm thick; 1 × Ø5.3 mm hole per leg; 10.6 mm corner gusset."
],
"text": "C-channel bracket: base leg 38.25 mm, vertical leg 42.7 mm, 50 mm wide, 8 mm thick; 1 × Ø5.3 mm hole per leg; 10.6 mm corner gusset."
} | {
"base_len": {
"type": "float",
"default": 38.25,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Base leg length (mm)"
},
"vert_len": {
"type": "float",
"default": 42.7,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Vertical leg l... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328856 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_len": {"type": 'float', "default": 38.25, "min": 25.0, "max": 90.0, "step": 1.0, "group": 'Body', "label": 'Base leg length (mm)'},
"vert_len": {"type": 'float', "def... |
tapped_462c9cd9_0293 | tapped | 0 | 1,177,328,857 | mirror_x | 1 | 1eb1b79bd47a74e0 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 6180,
"surface_area": 2680,
"principal_moments": [
386000,
386000,
510000
],
"n_faces": 91,
"n_edges": 317,
"n_vertices": 228
} | {
"lines": [
"One M10x1.5 tapped hole in a cylinder."
],
"text": "One M10x1.5 tapped hole in a cylinder."
} | {
"major_d": {
"type": "float",
"default": 10,
"min": 3,
"max": 24,
"step": 0.5,
"group": "Thread",
"label": "Thread major Ø (mm)"
},
"pitch": {
"type": "float",
"default": 1.5,
"min": 0.35000000000000003,
"max": 3.5,
"step": 0.05,
"group": "Thread",
"label"... | import cadquery as cq
from bd_warehouse import thread as _bdt
import build123d as _bd
# Generated by CadQuarry v0.6.0 — seed 1177328857 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"major_d": {"type": 'float', "default": 10.0, "min": 3.0, "max": 24.0, "step": 0.5, "group": 'Thread', "label": ... |
compound_462c9cda_0294 | compound | 1 | 1,177,328,858 | mirror_x | 2 | 4787b211ede5cb1e | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 44400,
"surface_area": 10100,
"principal_moments": [
9570000,
12399999.999999998,
12399999.999999998
],
"n_faces": 10,
"n_edges": 21,
"n_vertices": 14
} | {
"lines": [
"5-sided polygon section, 50 mm across corners, extruded 24.9 mm thick.",
"Ø23.1 mm circular section attachment, 27.6 mm long, from top face with a Ø10 mm bore."
],
"text": "5-sided polygon section, 50 mm across corners, extruded 24.9 mm thick. Ø23.1 mm circular section attachment, 27.6 mm lo... | {
"base_sides": {
"type": "int",
"default": 5,
"min": 3,
"max": 8,
"step": 1,
"group": "Base",
"label": "Base sides"
},
"base_r": {
"type": "float",
"default": 25,
"min": 15,
"max": 40,
"step": 1,
"group": "Base",
"label": "Base circumradius (mm)"
},
"ba... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328858 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_sides": {"type": 'int', "default": 5, "min": 3, "max": 8, "step": 1, "group": 'Base', "label": 'Base sides'},
"base_r": {"type": 'float', "default": 25, "min": 15.0, ... |
ribbed_462c9cdb_0295 | ribbed | 1 | 1,177,328,859 | mirror_x | 2 | be967f7c7200f1db | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 31300,
"surface_area": 11100,
"principal_moments": [
6120000,
14099999.999999998,
19200000
],
"n_faces": 30,
"n_edges": 72,
"n_vertices": 44
} | {
"lines": [
"Rectangular body, 70 × 43.2 × 8 mm (W×D×H).",
"Three ribs, 5.5 mm thick, 7.7 mm tall."
],
"text": "Rectangular body, 70 × 43.2 × 8 mm (W×D×H). Three ribs, 5.5 mm thick, 7.7 mm tall."
} | {
"base_w": {
"type": "float",
"default": 70,
"min": 20,
"max": 120,
"step": 1,
"group": "Base",
"label": "Base width (mm)"
},
"base_d": {
"type": "float",
"default": 43.2,
"min": 15,
"max": 120,
"step": 1,
"group": "Base",
"label": "Base depth (mm)"
},
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328859 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_w": {"type": 'float', "default": 70, "min": 20.0, "max": 120.0, "step": 1.0, "group": 'Base', "label": 'Base width (mm)'},
"base_d": {"type": 'float', "default": 43.2... |
revolved_462c9cdc_0296 | revolved | 1 | 1,177,328,860 | none | 1 | c4b631cb827d1b81 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 4170,
"surface_area": 2490,
"principal_moments": [
232000,
311000,
311000
],
"n_faces": 4,
"n_edges": 6,
"n_vertices": 4
} | {
"lines": [
"Revolved body, Ø18.28 mm × 23.7 mm tall with Ø10.5 mm bore."
],
"text": "Revolved body, Ø18.28 mm × 23.7 mm tall with Ø10.5 mm bore."
} | {
"outer_d": {
"type": "float",
"default": 18.28,
"min": 6,
"max": 80,
"step": 1,
"group": "Body",
"label": "Outer diameter (mm)"
},
"length": {
"type": "float",
"default": 23.7,
"min": 7.1,
"max": 71.1,
"step": 1,
"group": "Body",
"label": "Length (mm)"
}... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328860 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"outer_d": {"type": 'float', "default": 18.28, "min": 6.0, "max": 80.0, "step": 1.0, "group": 'Body', "label": 'Outer diameter (mm)'},
"length": {"type": 'float', "default"... |
lofted_462c9cdd_0297 | lofted | 0 | 1,177,328,861 | mirror_xy | 1 | 47f6bbb5b566a219 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 34600,
"surface_area": 6150,
"principal_moments": [
4620000,
7960000,
7960000
],
"n_faces": 8,
"n_edges": 18,
"n_vertices": 12
} | {
"lines": [
"Lofted body through 2 sections: Ø40 mm circular section → 6-sided polygon section, 22.3 mm across corners."
],
"text": "Lofted body through 2 sections: Ø40 mm circular section → 6-sided polygon section, 22.3 mm across corners."
} | {
"loft_base": {
"type": "float",
"default": 40,
"min": 20,
"max": 64,
"step": 1,
"group": "Body",
"label": "Base size (mm)"
},
"loft_top": {
"type": "float",
"default": 22.3,
"min": 8.9,
"max": 48,
"step": 1,
"group": "Body",
"label": "Top size (mm)"
},
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328861 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"loft_base": {"type": 'float', "default": 40, "min": 20.0, "max": 64.0, "step": 1.0, "group": 'Body', "label": 'Base size (mm)'},
"loft_top": {"type": 'float', "default": 2... |
compound_462c9cde_0298 | compound | 1 | 1,177,328,862 | mirror_xy | 2 | d22ab6378759a84c | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 226000,
"surface_area": 25400,
"principal_moments": [
50699999.99999999,
550000000,
550000000
],
"n_faces": 5,
"n_edges": 6,
"n_vertices": 4
} | {
"lines": [
"Ø45.97 mm circular section, extruded 96.2 mm thick.",
"Ø32.2 mm circular section attachment, 80.9 mm long, from top face."
],
"text": "Ø45.97 mm circular section, extruded 96.2 mm thick. Ø32.2 mm circular section attachment, 80.9 mm long, from top face."
} | {
"shaft_d": {
"type": "float",
"default": 45.97,
"min": 23,
"max": 82.7,
"step": 1,
"group": "Body",
"label": "Shaft diameter (mm)"
},
"shaft_len": {
"type": "float",
"default": 96.2,
"min": 38.5,
"max": 192.4,
"step": 1,
"group": "Body",
"label": "Shaft le... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328862 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"shaft_d": {"type": 'float', "default": 45.97, "min": 23.0, "max": 82.7, "step": 1.0, "group": 'Body', "label": 'Shaft diameter (mm)'},
"shaft_len": {"type": 'float', "defa... |
bracket_462c9cdf_0299 | bracket | 3 | 1,177,328,863 | mirror_xy | 1 | 8835acc8e1985b4b | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 15100,
"surface_area": 8900,
"principal_moments": [
2610000,
10500000,
11000000
],
"n_faces": 17,
"n_edges": 55,
"n_vertices": 34
} | {
"lines": [
"L-bracket: base leg 75 mm, vertical leg 47.5 mm, 30 mm wide, 4 mm thick; 2 × Ø5.3 mm holes per leg; 4.9 mm corner gusset."
],
"text": "L-bracket: base leg 75 mm, vertical leg 47.5 mm, 30 mm wide, 4 mm thick; 2 × Ø5.3 mm holes per leg; 4.9 mm corner gusset."
} | {
"base_len": {
"type": "float",
"default": 75,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Base leg length (mm)"
},
"vert_len": {
"type": "float",
"default": 47.5,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Vertical leg leng... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328863 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_len": {"type": 'float', "default": 75, "min": 25.0, "max": 90.0, "step": 1.0, "group": 'Body', "label": 'Base leg length (mm)'},
"vert_len": {"type": 'float', "defaul... |
plate_462c9ce0_0300 | plate | 2 | 1,177,328,864 | none | 3 | 7a20a441197d355d | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 45900,
"surface_area": 14600,
"principal_moments": [
10900000,
45999999.99999999,
56399999.99999999
],
"n_faces": 14,
"n_edges": 36,
"n_vertices": 24
} | {
"lines": [
"Rectangular body, 109.95 × 53.1 × 8 mm (W×D×H).",
"Four Ø5.3 mm holes at the corners, 76.965 × 37.17 mm spacing.",
"Fillet radius 3.808 mm on vertical edges."
],
"text": "Rectangular body, 109.95 × 53.1 × 8 mm (W×D×H). Four Ø5.3 mm holes at the corners, 76.965 × 37.17 mm spacing. Fillet ... | {
"plate_w": {
"type": "float",
"default": 109.95,
"min": 20,
"max": 120,
"step": 1,
"group": "Body",
"label": "Plate width (mm)"
},
"plate_d": {
"type": "float",
"default": 53.1,
"min": 8,
"max": 120,
"step": 1,
"group": "Body",
"label": "Plate depth (mm)"
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328864 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"plate_w": {"type": 'float', "default": 109.95, "min": 20.0, "max": 120.0, "step": 1.0, "group": 'Body', "label": 'Plate width (mm)'},
"plate_d": {"type": 'float', "default... |
revolved_462c9ce1_0301 | revolved | 0 | 1,177,328,865 | none | 1 | 3b32b07940b7fc25 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 2060,
"surface_area": 1640,
"principal_moments": [
47000,
106000,
106000
],
"n_faces": 3,
"n_edges": 4,
"n_vertices": 3
} | {
"lines": [
"Revolved body, Ø12.33 mm × 25.9 mm tall."
],
"text": "Revolved body, Ø12.33 mm × 25.9 mm tall."
} | {
"outer_d": {
"type": "float",
"default": 12.33,
"min": 6,
"max": 80,
"step": 1,
"group": "Body",
"label": "Outer diameter (mm)"
},
"length": {
"type": "float",
"default": 25.9,
"min": 7.8,
"max": 77.7,
"step": 1,
"group": "Body",
"label": "Length (mm)"
}... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328865 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"outer_d": {"type": 'float', "default": 12.33, "min": 6.0, "max": 80.0, "step": 1.0, "group": 'Body', "label": 'Outer diameter (mm)'},
"length": {"type": 'float', "default"... |
swept_462c9ce2_0302 | swept | 1 | 1,177,328,866 | mirror_x | 1 | 86bfc1c9a5ae72c1 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 7730,
"surface_area": 2860,
"principal_moments": [
409000,
1610000,
1860000
],
"n_faces": 3,
"n_edges": 3,
"n_vertices": 2
} | {
"lines": [
"Ø12.8 mm circular section swept along a curved path, ~69.36 mm span."
],
"text": "Ø12.8 mm circular section swept along a curved path, ~69.36 mm span."
} | {
"path_w": {
"type": "float",
"default": 69.36,
"min": 34.7,
"max": 124.8,
"step": 1,
"group": "Path",
"label": "Path width (mm)"
},
"path_h": {
"type": "float",
"default": 40,
"min": 20,
"max": 72,
"step": 1,
"group": "Path",
"label": "Path length (mm)"
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328866 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"path_w": {"type": 'float', "default": 69.36, "min": 34.7, "max": 124.8, "step": 1.0, "group": 'Path', "label": 'Path width (mm)'},
"path_h": {"type": 'float', "default": 4... |
compound_462c9ce3_0303 | compound | 2 | 1,177,328,867 | mirror_xy | 3 | 3067aeabacf852bf | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 177000,
"surface_area": 20800,
"principal_moments": [
40300000,
261000000,
261000000
],
"n_faces": 14,
"n_edges": 30,
"n_vertices": 20
} | {
"lines": [
"Ø45.76 mm circular section, extruded 85.3 mm thick.",
"Ø28.8 mm circular section attachment, 48.9 mm long, from top face.",
"8-sided polygon section, 23.2 mm across corners attachment, 12.1 mm long, from top face."
],
"text": "Ø45.76 mm circular section, extruded 85.3 mm thick. Ø28.8 mm ... | {
"shaft_d": {
"type": "float",
"default": 45.76,
"min": 22.9,
"max": 82.4,
"step": 1,
"group": "Body",
"label": "Shaft diameter (mm)"
},
"shaft_len": {
"type": "float",
"default": 85.3,
"min": 34.1,
"max": 170.6,
"step": 1,
"group": "Body",
"label": "Shaft ... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328867 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"shaft_d": {"type": 'float', "default": 45.76, "min": 22.9, "max": 82.4, "step": 1.0, "group": 'Body', "label": 'Shaft diameter (mm)'},
"shaft_len": {"type": 'float', "defa... |
plate_462c9ce4_0304 | plate | 1 | 1,177,328,868 | none | 2 | b166b14883e1be86 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 19700,
"surface_area": 9040,
"principal_moments": [
1980000,
16299999.999999998,
18100000
],
"n_faces": 42,
"n_edges": 120,
"n_vertices": 80
} | {
"lines": [
"Rectangular body, 100 × 34.4 × 6 mm (W×D×H).",
"Nine 6.1 × 3.2 mm slots in a 3×3 grid, 40 × 13.8 mm pitch."
],
"text": "Rectangular body, 100 × 34.4 × 6 mm (W×D×H). Nine 6.1 × 3.2 mm slots in a 3×3 grid, 40 × 13.8 mm pitch."
} | {
"plate_w": {
"type": "float",
"default": 100,
"min": 20,
"max": 120,
"step": 1,
"group": "Body",
"label": "Plate width (mm)"
},
"plate_d": {
"type": "float",
"default": 34.4,
"min": 8,
"max": 120,
"step": 1,
"group": "Body",
"label": "Plate depth (mm)"
}... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177328868 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"plate_w": {"type": 'float', "default": 100, "min": 20.0, "max": 120.0, "step": 1.0, "group": 'Body', "label": 'Plate width (mm)'},
"plate_d": {"type": 'float', "default": ... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.