part_id stringlengths 18 23 | family stringclasses 15
values | tier int64 0 3 | seed int64 1.18B 1.18B | symmetry stringclasses 4
values | op_count int64 1 7 | ir_hash stringlengths 16 16 | generator_version stringclasses 1
value | license stringclasses 1
value | geometry_signature dict | dimensions dict | params unknown | source stringlengths 695 3.31k |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
threaded_462c9f4b_0919 | threaded | 1 | 1,177,329,483 | mirror_xy | 1 | ecbdb40fc0b15249 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 66200,
"surface_area": 17300,
"principal_moments": [
19500000,
30499999.999999996,
30499999.999999996
],
"n_faces": 319,
"n_edges": 909,
"n_vertices": 592
} | {
"lines": [
"M24x3 internal thread, 61.5 mm long."
],
"text": "M24x3 internal thread, 61.5 mm long."
} | {
"major_d": {
"type": "float",
"default": 24,
"min": 4,
"max": 24,
"step": 0.5,
"group": "Thread",
"label": "Major diameter (mm)"
},
"pitch": {
"type": "float",
"default": 3,
"min": 1.5,
"max": 6,
"step": 0.05,
"group": "Thread",
"label": "Pitch (mm)"
},
... | import cadquery as cq
from bd_warehouse import thread as _bdt
import build123d as _bd
# Generated by CadQuarry v0.6.0 — seed 1177329483 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"major_d": {"type": 'float', "default": 24.0, "min": 4.0, "max": 24.0, "step": 0.5, "group": 'Thread', "label": ... |
gear_462c9f4c_0920 | gear | 2 | 1,177,329,484 | mirror_xy | 1 | b1a282e949451401 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 86600,
"surface_area": 18200,
"principal_moments": [
39100000,
39100000,
74100000
],
"n_faces": 153,
"n_edges": 453,
"n_vertices": 302
} | {
"lines": [
"Helical gear, module 2.5 mm, 30 teeth (pitch Ø75 mm), face width 16.9 mm, 18.7° helix, Ø11.6 mm bore."
],
"text": "Helical gear, module 2.5 mm, 30 teeth (pitch Ø75 mm), face width 16.9 mm, 18.7° helix, Ø11.6 mm bore."
} | {
"module": {
"type": "float",
"default": 2.5,
"min": 1,
"max": 6,
"step": 0.25,
"group": "Gear",
"label": "Module (mm)"
},
"teeth": {
"type": "int",
"default": 30,
"min": 10,
"max": 40,
"step": 1,
"group": "Gear",
"label": "Number of teeth"
},
"gear_w":... | import cadquery as cq
import math
import py_gearworks as _gw
# Generated by CadQuarry v0.6.0 — seed 1177329484 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"module": {"type": 'float', "default": 2.5, "min": 1.0, "max": 6.0, "step": 0.25, "group": 'Gear', "label": 'Module (mm)'},
"teeth": ... |
bracket_462c9f4d_0921 | bracket | 3 | 1,177,329,485 | mirror_xy | 1 | b8b5a50eb8863fdc | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 16500,
"surface_area": 9770,
"principal_moments": [
2600000,
10800000,
11499999.999999998
],
"n_faces": 22,
"n_edges": 70,
"n_vertices": 44
} | {
"lines": [
"Z-bracket: base leg 55 mm, vertical leg 35 mm, top leg 35.6 mm, 35 mm wide, 4 mm thick; 2 × Ø5.3 mm holes per leg; 3.4 mm corner gusset."
],
"text": "Z-bracket: base leg 55 mm, vertical leg 35 mm, top leg 35.6 mm, 35 mm wide, 4 mm thick; 2 × Ø5.3 mm holes per leg; 3.4 mm corner gusset."
} | {
"base_len": {
"type": "float",
"default": 55,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Base leg length (mm)"
},
"vert_len": {
"type": "float",
"default": 35,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Vertical leg length... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329485 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_len": {"type": 'float', "default": 55, "min": 25.0, "max": 90.0, "step": 1.0, "group": 'Body', "label": 'Base leg length (mm)'},
"vert_len": {"type": 'float', "defaul... |
ribbed_462c9f4e_0922 | ribbed | 2 | 1,177,329,486 | mirror_xy | 2 | 562c56ac1eafbf07 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 20000,
"surface_area": 13400,
"principal_moments": [
5390000,
12499999.999999998,
17100000
],
"n_faces": 30,
"n_edges": 72,
"n_vertices": 44
} | {
"lines": [
"Rectangular body, 80 × 44.8 × 3 mm (W×D×H).",
"Three ribs, 3.9 mm thick, 12.4 mm tall."
],
"text": "Rectangular body, 80 × 44.8 × 3 mm (W×D×H). Three ribs, 3.9 mm thick, 12.4 mm tall."
} | {
"base_w": {
"type": "float",
"default": 80,
"min": 20,
"max": 120,
"step": 1,
"group": "Base",
"label": "Base width (mm)"
},
"base_d": {
"type": "float",
"default": 44.8,
"min": 15,
"max": 120,
"step": 1,
"group": "Base",
"label": "Base depth (mm)"
},
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329486 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_w": {"type": 'float', "default": 80, "min": 20.0, "max": 120.0, "step": 1.0, "group": 'Base', "label": 'Base width (mm)'},
"base_d": {"type": 'float', "default": 44.8... |
swept_462c9f4f_0923 | swept | 1 | 1,177,329,487 | mirror_xy | 1 | e8ea628c62efec91 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 3510,
"surface_area": 2380,
"principal_moments": [
197000,
3090000,
3270000
],
"n_faces": 3,
"n_edges": 3,
"n_vertices": 2
} | {
"lines": [
"Ø6.2 mm circular section swept along a curved path, ~88.61 mm span."
],
"text": "Ø6.2 mm circular section swept along a curved path, ~88.61 mm span."
} | {
"path_w": {
"type": "float",
"default": 75,
"min": 37.5,
"max": 135,
"step": 1,
"group": "Path",
"label": "Path width (mm)"
},
"path_h": {
"type": "float",
"default": 88.61,
"min": 44.3,
"max": 159.5,
"step": 1,
"group": "Path",
"label": "Path length (mm)"... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329487 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"path_w": {"type": 'float', "default": 75, "min": 37.5, "max": 135.0, "step": 1.0, "group": 'Path', "label": 'Path width (mm)'},
"path_h": {"type": 'float', "default": 88.6... |
profiled_462c9f50_0924 | profiled | 2 | 1,177,329,488 | mirror_xy | 1 | 7c310d9bc0376d00 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 77900,
"surface_area": 16200,
"principal_moments": [
5320000,
299000000,
301000000
],
"n_faces": 6,
"n_edges": 12,
"n_vertices": 8
} | {
"lines": [
"27.5 × 15 mm slot section, extruded 214 mm thick."
],
"text": "27.5 × 15 mm slot section, extruded 214 mm thick."
} | {
"slot_len": {
"type": "float",
"default": 27.5,
"min": 13.8,
"max": 55,
"step": 1,
"group": "Profile",
"label": "Slot length (mm)"
},
"slot_w": {
"type": "float",
"default": 15,
"min": 7.5,
"max": 30,
"step": 0.5,
"group": "Profile",
"label": "Slot width (... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329488 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"slot_len": {"type": 'float', "default": 27.5, "min": 13.8, "max": 55.0, "step": 1.0, "group": 'Profile', "label": 'Slot length (mm)'},
"slot_w": {"type": 'float', "default... |
compound_462c9f51_0925 | compound | 1 | 1,177,329,489 | none | 2 | 8de60d8a1c238ba3 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 293000,
"surface_area": 28300,
"principal_moments": [
196000000,
223000000,
257000000
],
"n_faces": 13,
"n_edges": 30,
"n_vertices": 20
} | {
"lines": [
"Rectangular body, 60 × 78.1 × 59.1 mm (W×D×H).",
"6-sided polygon section, 28.4 mm across corners attachment, 30.4 mm long, from left face."
],
"text": "Rectangular body, 60 × 78.1 × 59.1 mm (W×D×H). 6-sided polygon section, 28.4 mm across corners attachment, 30.4 mm long, from left face."
} | {
"block_w": {
"type": "float",
"default": 60,
"min": 15,
"max": 100,
"step": 1,
"group": "Body",
"label": "Block width (mm)"
},
"block_d": {
"type": "float",
"default": 78.1,
"min": 10,
"max": 100,
"step": 1,
"group": "Body",
"label": "Block depth (mm)"
}... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329489 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"block_w": {"type": 'float', "default": 60, "min": 15.0, "max": 100.0, "step": 1.0, "group": 'Body', "label": 'Block width (mm)'},
"block_d": {"type": 'float', "default": 7... |
revolved_462c9f52_0926 | revolved | 0 | 1,177,329,490 | none | 1 | f43f244f26c5b120 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 18800,
"surface_area": 6480,
"principal_moments": [
2540000,
3050000,
3050000
],
"n_faces": 3,
"n_edges": 4,
"n_vertices": 3
} | {
"lines": [
"Revolved body, Ø30 mm × 39.9 mm tall."
],
"text": "Revolved body, Ø30 mm × 39.9 mm tall."
} | {
"outer_d": {
"type": "float",
"default": 30,
"min": 6,
"max": 80,
"step": 1,
"group": "Body",
"label": "Outer diameter (mm)"
},
"length": {
"type": "float",
"default": 39.9,
"min": 12,
"max": 119.7,
"step": 1,
"group": "Body",
"label": "Length (mm)"
}
} | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329490 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"outer_d": {"type": 'float', "default": 30.0, "min": 6.0, "max": 80.0, "step": 1.0, "group": 'Body', "label": 'Outer diameter (mm)'},
"length": {"type": 'float', "default":... |
gear_462c9f53_0927 | gear | 1 | 1,177,329,491 | none | 1 | 4eaf8f741df21f93 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 3600,
"surface_area": 2580,
"principal_moments": [
251000,
251000,
490000
],
"n_faces": 159,
"n_edges": 471,
"n_vertices": 314
} | {
"lines": [
"Spur gear, module 1.25 mm, 26 teeth (pitch Ø32.5 mm), face width 4.5 mm, Ø5 mm bore."
],
"text": "Spur gear, module 1.25 mm, 26 teeth (pitch Ø32.5 mm), face width 4.5 mm, Ø5 mm bore."
} | {
"module": {
"type": "float",
"default": 1.25,
"min": 1,
"max": 6,
"step": 0.25,
"group": "Gear",
"label": "Module (mm)"
},
"teeth": {
"type": "int",
"default": 26,
"min": 10,
"max": 40,
"step": 1,
"group": "Gear",
"label": "Number of teeth"
},
"gear_w"... | import cadquery as cq
import math
import py_gearworks as _gw
# Generated by CadQuarry v0.6.0 — seed 1177329491 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"module": {"type": 'float', "default": 1.25, "min": 1.0, "max": 6.0, "step": 0.25, "group": 'Gear', "label": 'Module (mm)'},
"teeth":... |
compound_462c9f54_0928 | compound | 1 | 1,177,329,492 | none | 2 | c1e81da37cfb670c | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 3110,
"surface_area": 2170,
"principal_moments": [
57800,
398000,
398000
],
"n_faces": 6,
"n_edges": 9,
"n_vertices": 6
} | {
"lines": [
"Ø12 mm circular section, extruded 25.3 mm thick.",
"Ø8.4 mm circular section attachment, 16.4 mm long, from top face with a Ø4.5 mm bore."
],
"text": "Ø12 mm circular section, extruded 25.3 mm thick. Ø8.4 mm circular section attachment, 16.4 mm long, from top face with a Ø4.5 mm bore."
} | {
"shaft_d": {
"type": "float",
"default": 12,
"min": 6,
"max": 21.6,
"step": 1,
"group": "Body",
"label": "Shaft diameter (mm)"
},
"shaft_len": {
"type": "float",
"default": 25.3,
"min": 10.1,
"max": 50.6,
"step": 1,
"group": "Body",
"label": "Shaft length ... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329492 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"shaft_d": {"type": 'float', "default": 12.0, "min": 6.0, "max": 21.6, "step": 1.0, "group": 'Body', "label": 'Shaft diameter (mm)'},
"shaft_len": {"type": 'float', "defaul... |
lofted_462c9f55_0929 | lofted | 0 | 1,177,329,493 | mirror_x | 1 | 5c18527c4930d904 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 53500,
"surface_area": 8710,
"principal_moments": [
11300000,
15399999.999999998,
15399999.999999998
],
"n_faces": 7,
"n_edges": 15,
"n_vertices": 10
} | {
"lines": [
"Lofted body through 2 sections: 45 × 45 mm rectangular section → Ø19.2 mm circular section."
],
"text": "Lofted body through 2 sections: 45 × 45 mm rectangular section → Ø19.2 mm circular section."
} | {
"loft_base": {
"type": "float",
"default": 45,
"min": 22.5,
"max": 72,
"step": 1,
"group": "Body",
"label": "Base size (mm)"
},
"loft_top": {
"type": "float",
"default": 19.2,
"min": 7.7,
"max": 54,
"step": 1,
"group": "Body",
"label": "Top size (mm)"
},... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329493 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"loft_base": {"type": 'float', "default": 45, "min": 22.5, "max": 72.0, "step": 1.0, "group": 'Body', "label": 'Base size (mm)'},
"loft_top": {"type": 'float', "default": 1... |
sketched_462c9f56_0930 | sketched | 2 | 1,177,329,494 | mirror_x | 3 | 0d117b0ef413ecb0 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 27400,
"surface_area": 6170,
"principal_moments": [
2960000,
5610000,
6020000
],
"n_faces": 12,
"n_edges": 27,
"n_vertices": 18
} | {
"lines": [
"freeform sketched section (7 segments: 4 straight, 2 arcs, 1 curve), ~32.824 × 50.89 mm, extruded 19.1 mm thick.",
"One Ø4.3 mm hole in a 1×1 grid, 10 × 10 mm pitch.",
"Boss Ø19.8 mm × 9.4 mm tall on top face with a Ø4.3 mm bore."
],
"text": "freeform sketched section (7 segments: 4 stra... | {
"sk_w": {
"type": "float",
"default": 40,
"min": 20,
"max": 72,
"step": 1,
"group": "Sketch",
"label": "Sketch width (mm)"
},
"sk_h": {
"type": "float",
"default": 70,
"min": 35,
"max": 126,
"step": 1,
"group": "Sketch",
"label": "Sketch height (mm)"
},
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329494 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"sk_w": {"type": 'float', "default": 40.0, "min": 20.0, "max": 72.0, "step": 1.0, "group": 'Sketch', "label": 'Sketch width (mm)'},
"sk_h": {"type": 'float', "default": 70,... |
lofted_462c9f57_0931 | lofted | 2 | 1,177,329,495 | mirror_xy | 2 | b7e1b8fdd034e8d8 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 34900,
"surface_area": 8630,
"principal_moments": [
7210000,
7230000,
8720000
],
"n_faces": 13,
"n_edges": 33,
"n_vertices": 22
} | {
"lines": [
"Lofted body through 3 sections: 50 × 50 mm rectangular section → 6-sided polygon section, 37.4 mm across corners → 6-sided polygon section, 24.7 mm across corners.",
"One Ø10.6 mm hole in a 1×1 grid, 10 × 10 mm pitch."
],
"text": "Lofted body through 3 sections: 50 × 50 mm rectangular sectio... | {
"loft_base": {
"type": "float",
"default": 50,
"min": 25,
"max": 80,
"step": 1,
"group": "Body",
"label": "Base size (mm)"
},
"loft_top": {
"type": "float",
"default": 24.7,
"min": 9.9,
"max": 60,
"step": 1,
"group": "Body",
"label": "Top size (mm)"
},
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329495 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"loft_base": {"type": 'float', "default": 50, "min": 25.0, "max": 80.0, "step": 1.0, "group": 'Body', "label": 'Base size (mm)'},
"loft_top": {"type": 'float', "default": 2... |
plate_462c9f58_0932 | plate | 1 | 1,177,329,496 | mirror_x | 2 | 7ce9f32ee4363306 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 21800,
"surface_area": 7330,
"principal_moments": [
1640000,
11499999.999999998,
12699999.999999998
],
"n_faces": 10,
"n_edges": 24,
"n_vertices": 16
} | {
"lines": [
"Rectangular body, 80 × 28.8 × 10 mm (W×D×H).",
"Four Ø6.4 mm holes at the corners, 56 × 20.16 mm spacing."
],
"text": "Rectangular body, 80 × 28.8 × 10 mm (W×D×H). Four Ø6.4 mm holes at the corners, 56 × 20.16 mm spacing."
} | {
"plate_w": {
"type": "float",
"default": 80,
"min": 20,
"max": 120,
"step": 1,
"group": "Body",
"label": "Plate width (mm)"
},
"plate_d": {
"type": "float",
"default": 28.8,
"min": 8,
"max": 120,
"step": 1,
"group": "Body",
"label": "Plate depth (mm)"
},... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329496 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"plate_w": {"type": 'float', "default": 80, "min": 20.0, "max": 120.0, "step": 1.0, "group": 'Body', "label": 'Plate width (mm)'},
"plate_d": {"type": 'float', "default": 2... |
plate_462c9f5a_0934 | plate | 1 | 1,177,329,498 | radial | 2 | e7b077881e44fa3b | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 15600,
"surface_area": 5780,
"principal_moments": [
1170000,
5410000,
6330000
],
"n_faces": 16,
"n_edges": 42,
"n_vertices": 28
} | {
"lines": [
"Rectangular body, 62.69 × 29 × 10 mm (W×D×H).",
"Eight Ø8.4 mm holes on a Ø37.6 mm bolt circle."
],
"text": "Rectangular body, 62.69 × 29 × 10 mm (W×D×H). Eight Ø8.4 mm holes on a Ø37.6 mm bolt circle."
} | {
"plate_w": {
"type": "float",
"default": 62.69,
"min": 20,
"max": 120,
"step": 1,
"group": "Body",
"label": "Plate width (mm)"
},
"plate_d": {
"type": "float",
"default": 29,
"min": 8,
"max": 120,
"step": 1,
"group": "Body",
"label": "Plate depth (mm)"
}... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329498 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"plate_w": {"type": 'float', "default": 62.69, "min": 20.0, "max": 120.0, "step": 1.0, "group": 'Body', "label": 'Plate width (mm)'},
"plate_d": {"type": 'float', "default"... |
compound_462c9f5b_0935 | compound | 1 | 1,177,329,499 | mirror_xy | 3 | ef2a6fcb82d1ef15 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 39500,
"surface_area": 10000,
"principal_moments": [
11100000,
12499999.999999998,
13999999.999999998
],
"n_faces": 12,
"n_edges": 27,
"n_vertices": 18
} | {
"lines": [
"Rectangular body, 42.35 × 49 × 16 mm (W×D×H).",
"Ø14.8 mm circular section attachment, 44.8 mm long, from top face.",
"Four Ø5.3 mm holes at the corners, 29.645 × 34.3 mm spacing."
],
"text": "Rectangular body, 42.35 × 49 × 16 mm (W×D×H). Ø14.8 mm circular section attachment, 44.8 mm lon... | {
"base_w": {
"type": "float",
"default": 42.35,
"min": 30,
"max": 160,
"step": 1,
"group": "Base",
"label": "Base width (mm)"
},
"base_d": {
"type": "float",
"default": 49,
"min": 25,
"max": 160,
"step": 1,
"group": "Base",
"label": "Base depth (mm)"
},
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329499 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_w": {"type": 'float', "default": 42.35, "min": 30.0, "max": 160.0, "step": 1.0, "group": 'Base', "label": 'Base width (mm)'},
"base_d": {"type": 'float', "default": 4... |
revolved_462c9f5c_0936 | revolved | 1 | 1,177,329,500 | none | 2 | f353b59a4f7e1aff | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 458000,
"surface_area": 61300,
"principal_moments": [
356000000,
953000000,
953000000
],
"n_faces": 5,
"n_edges": 8,
"n_vertices": 5
} | {
"lines": [
"Revolved body, Ø72.01 mm × 168.8 mm tall.",
"Chamfer 0.9 mm on the >Z or <Z edges."
],
"text": "Revolved body, Ø72.01 mm × 168.8 mm tall. Chamfer 0.9 mm on the >Z or <Z edges."
} | {
"outer_d": {
"type": "float",
"default": 72.01,
"min": 6,
"max": 80,
"step": 1,
"group": "Body",
"label": "Outer diameter (mm)"
},
"length": {
"type": "float",
"default": 168.8,
"min": 50.6,
"max": 320,
"step": 1,
"group": "Body",
"label": "Length (mm)"
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329500 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"outer_d": {"type": 'float', "default": 72.01, "min": 6.0, "max": 80.0, "step": 1.0, "group": 'Body', "label": 'Outer diameter (mm)'},
"length": {"type": 'float', "default"... |
revolved_462c9f5d_0937 | revolved | 0 | 1,177,329,501 | none | 1 | f2528c445ecbe931 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 696000,
"surface_area": 89600,
"principal_moments": [
566000000,
2770000000,
2770000000
],
"n_faces": 3,
"n_edges": 4,
"n_vertices": 3
} | {
"lines": [
"Revolved body, Ø73.62 mm × 245.2 mm tall."
],
"text": "Revolved body, Ø73.62 mm × 245.2 mm tall."
} | {
"outer_d": {
"type": "float",
"default": 73.62,
"min": 6,
"max": 80,
"step": 1,
"group": "Body",
"label": "Outer diameter (mm)"
},
"length": {
"type": "float",
"default": 245.2,
"min": 73.6,
"max": 320,
"step": 1,
"group": "Body",
"label": "Length (mm)"
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329501 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"outer_d": {"type": 'float', "default": 73.62, "min": 6.0, "max": 80.0, "step": 1.0, "group": 'Body', "label": 'Outer diameter (mm)'},
"length": {"type": 'float', "default"... |
bracket_462c9f5e_0938 | bracket | 1 | 1,177,329,502 | none | 1 | 7141c80b66281dda | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 13200,
"surface_area": 9730,
"principal_moments": [
3320000,
4890000,
7370000
],
"n_faces": 12,
"n_edges": 30,
"n_vertices": 20
} | {
"lines": [
"Z-bracket: base leg 41.58 mm, vertical leg 25.9 mm, top leg 25.8 mm, 51.04 mm wide, 3 mm thick; 1 × Ø6.4 mm hole per leg."
],
"text": "Z-bracket: base leg 41.58 mm, vertical leg 25.9 mm, top leg 25.8 mm, 51.04 mm wide, 3 mm thick; 1 × Ø6.4 mm hole per leg."
} | {
"base_len": {
"type": "float",
"default": 41.58,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Base leg length (mm)"
},
"vert_len": {
"type": "float",
"default": 25.9,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Vertical leg l... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329502 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_len": {"type": 'float', "default": 41.58, "min": 25.0, "max": 90.0, "step": 1.0, "group": 'Body', "label": 'Base leg length (mm)'},
"vert_len": {"type": 'float', "def... |
compound_462c9f5f_0939 | compound | 1 | 1,177,329,503 | mirror_xy | 3 | 383a2383022c8071 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 106000,
"surface_area": 15400,
"principal_moments": [
34300000,
42700000,
55699999.99999999
],
"n_faces": 28,
"n_edges": 76,
"n_vertices": 50
} | {
"lines": [
"Rectangular body, 60 × 51.5 × 34.6 mm (W×D×H).",
"8-sided polygon section, 8.4 mm across corners attachment, 4.6 mm long, from back face with a Ø3.6 mm bore.",
"8-sided polygon section, 8.4 mm across corners attachment, 4.6 mm long, from left face with a Ø3.6 mm bore."
],
"text": "Rectan... | {
"block_w": {
"type": "float",
"default": 60,
"min": 20,
"max": 120,
"step": 1,
"group": "Body",
"label": "Body width (mm)"
},
"block_d": {
"type": "float",
"default": 51.5,
"min": 15,
"max": 120,
"step": 1,
"group": "Body",
"label": "Body depth (mm)"
},
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329503 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"block_w": {"type": 'float', "default": 60, "min": 20.0, "max": 120.0, "step": 1.0, "group": 'Body', "label": 'Body width (mm)'},
"block_d": {"type": 'float', "default": 51... |
ribbed_462c9f60_0940 | ribbed | 1 | 1,177,329,504 | mirror_xy | 2 | cf93e595d44e5f10 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 46000,
"surface_area": 15700,
"principal_moments": [
10800000,
29999999.999999996,
37600000
],
"n_faces": 30,
"n_edges": 72,
"n_vertices": 44
} | {
"lines": [
"Rectangular body, 83.23 × 41.7 × 10 mm (W×D×H).",
"Three ribs, 4.3 mm thick, 13.2 mm tall."
],
"text": "Rectangular body, 83.23 × 41.7 × 10 mm (W×D×H). Three ribs, 4.3 mm thick, 13.2 mm tall."
} | {
"base_w": {
"type": "float",
"default": 83.23,
"min": 20,
"max": 120,
"step": 1,
"group": "Base",
"label": "Base width (mm)"
},
"base_d": {
"type": "float",
"default": 41.7,
"min": 15,
"max": 120,
"step": 1,
"group": "Base",
"label": "Base depth (mm)"
},... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329504 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_w": {"type": 'float', "default": 83.23, "min": 20.0, "max": 120.0, "step": 1.0, "group": 'Base', "label": 'Base width (mm)'},
"base_d": {"type": 'float', "default": 4... |
revolved_462c9f61_0941 | revolved | 2 | 1,177,329,505 | none | 1 | 53046445b5a2abf8 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 2160,
"surface_area": 1620,
"principal_moments": [
79600,
95600,
95600
],
"n_faces": 8,
"n_edges": 12,
"n_vertices": 8
} | {
"lines": [
"Revolved body, Ø15.15 mm × 17.4 mm tall with Ø8.2 mm bore, 1.15 mm-wide groove 1.06 mm deep."
],
"text": "Revolved body, Ø15.15 mm × 17.4 mm tall with Ø8.2 mm bore, 1.15 mm-wide groove 1.06 mm deep."
} | {
"outer_d": {
"type": "float",
"default": 15.15,
"min": 6,
"max": 80,
"step": 1,
"group": "Body",
"label": "Outer diameter (mm)"
},
"length": {
"type": "float",
"default": 17.4,
"min": 5.2,
"max": 52.2,
"step": 1,
"group": "Body",
"label": "Length (mm)"
}... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329505 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"outer_d": {"type": 'float', "default": 15.15, "min": 6.0, "max": 80.0, "step": 1.0, "group": 'Body', "label": 'Outer diameter (mm)'},
"length": {"type": 'float', "default"... |
enclosure_462c9f62_0942 | enclosure | 1 | 1,177,329,506 | mirror_xy | 2 | 554892110c48906c | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 18000,
"surface_area": 13400,
"principal_moments": [
3910000,
9010000,
9600000
],
"n_faces": 11,
"n_edges": 24,
"n_vertices": 16
} | {
"lines": [
"Rectangular body, 60 × 29.8 × 30.4 mm (W×D×H).",
"Hollowed to 2.8 mm wall thickness, open at top face."
],
"text": "Rectangular body, 60 × 29.8 × 30.4 mm (W×D×H). Hollowed to 2.8 mm wall thickness, open at top face."
} | {
"enc_w": {
"type": "float",
"default": 60,
"min": 30,
"max": 120,
"step": 1,
"group": "Body",
"label": "Enclosure width (mm)"
},
"enc_d": {
"type": "float",
"default": 29.8,
"min": 12,
"max": 120,
"step": 1,
"group": "Body",
"label": "Enclosure depth (mm)"... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329506 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"enc_w": {"type": 'float', "default": 60, "min": 30.0, "max": 120.0, "step": 1.0, "group": 'Body', "label": 'Enclosure width (mm)'},
"enc_d": {"type": 'float', "default": 2... |
bracket_462c9f63_0943 | bracket | 1 | 1,177,329,507 | mirror_xy | 1 | d3cb53bfb213ef2a | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 7250,
"surface_area": 5800,
"principal_moments": [
1420000,
5060000,
6010000
],
"n_faces": 10,
"n_edges": 24,
"n_vertices": 16
} | {
"lines": [
"L-bracket: base leg 68.48 mm, vertical leg 59.8 mm, 19.63 mm wide, 3 mm thick; 1 × Ø5.3 mm hole per leg."
],
"text": "L-bracket: base leg 68.48 mm, vertical leg 59.8 mm, 19.63 mm wide, 3 mm thick; 1 × Ø5.3 mm hole per leg."
} | {
"base_len": {
"type": "float",
"default": 68.48,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Base leg length (mm)"
},
"vert_len": {
"type": "float",
"default": 59.8,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Vertical leg l... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329507 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_len": {"type": 'float', "default": 68.48, "min": 25.0, "max": 90.0, "step": 1.0, "group": 'Body', "label": 'Base leg length (mm)'},
"vert_len": {"type": 'float', "def... |
swept_462c9f64_0944 | swept | 0 | 1,177,329,508 | mirror_xy | 1 | 6b2cddb84ba5eedd | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 21800,
"surface_area": 7980,
"principal_moments": [
5090000,
21000000,
25699999.999999996
],
"n_faces": 6,
"n_edges": 12,
"n_vertices": 8
} | {
"lines": [
"18.7 × 9.7 mm rectangular section swept along a curved path, ~105 mm span."
],
"text": "18.7 × 9.7 mm rectangular section swept along a curved path, ~105 mm span."
} | {
"path_w": {
"type": "float",
"default": 60,
"min": 30,
"max": 108,
"step": 1,
"group": "Path",
"label": "Path width (mm)"
},
"path_h": {
"type": "float",
"default": 105,
"min": 52.5,
"max": 189,
"step": 1,
"group": "Path",
"label": "Path length (mm)"
},
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329508 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"path_w": {"type": 'float', "default": 60, "min": 30.0, "max": 108.0, "step": 1.0, "group": 'Path', "label": 'Path width (mm)'},
"path_h": {"type": 'float', "default": 105,... |
plate_462c9f65_0945 | plate | 2 | 1,177,329,509 | none | 2 | 8b8c2d7198550a84 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 2750,
"surface_area": 2170,
"principal_moments": [
149000,
207000,
349000
],
"n_faces": 18,
"n_edges": 56,
"n_vertices": 36
} | {
"lines": [
"Rectangular body, 31.94 × 27 × 4 mm (W×D×H).",
"Four Ø5.3 mm countersunk holes (82°) at the corners, 22.358 × 18.9 mm spacing."
],
"text": "Rectangular body, 31.94 × 27 × 4 mm (W×D×H). Four Ø5.3 mm countersunk holes (82°) at the corners, 22.358 × 18.9 mm spacing."
} | {
"plate_w": {
"type": "float",
"default": 31.94,
"min": 20,
"max": 120,
"step": 1,
"group": "Body",
"label": "Plate width (mm)"
},
"plate_d": {
"type": "float",
"default": 27,
"min": 8,
"max": 120,
"step": 1,
"group": "Body",
"label": "Plate depth (mm)"
}... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329509 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"plate_w": {"type": 'float', "default": 31.94, "min": 20.0, "max": 120.0, "step": 1.0, "group": 'Body', "label": 'Plate width (mm)'},
"plate_d": {"type": 'float', "default"... |
plate_462c9f66_0946 | plate | 2 | 1,177,329,510 | radial | 3 | 2664f5a68cf234ff | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 12000,
"surface_area": 5520,
"principal_moments": [
999000,
4950000,
5880000
],
"n_faces": 28,
"n_edges": 78,
"n_vertices": 52
} | {
"lines": [
"Rectangular body, 70 × 30.6 × 6 mm (W×D×H).",
"Six Ø8.4 mm holes on a Ø42 mm bolt circle.",
"Chamfer 1.2 mm on vertical edges."
],
"text": "Rectangular body, 70 × 30.6 × 6 mm (W×D×H). Six Ø8.4 mm holes on a Ø42 mm bolt circle. Chamfer 1.2 mm on vertical edges."
} | {
"plate_w": {
"type": "float",
"default": 70,
"min": 20,
"max": 120,
"step": 1,
"group": "Body",
"label": "Plate width (mm)"
},
"plate_d": {
"type": "float",
"default": 30.6,
"min": 8,
"max": 120,
"step": 1,
"group": "Body",
"label": "Plate depth (mm)"
},... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329510 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"plate_w": {"type": 'float', "default": 70, "min": 20.0, "max": 120.0, "step": 1.0, "group": 'Body', "label": 'Plate width (mm)'},
"plate_d": {"type": 'float', "default": 3... |
revolved_462c9f67_0947 | revolved | 0 | 1,177,329,511 | none | 1 | 0f3c3956bbf87e6f | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 109000,
"surface_area": 19400,
"principal_moments": [
50499999.99999999,
50499999.99999999,
69300000
],
"n_faces": 3,
"n_edges": 4,
"n_vertices": 3
} | {
"lines": [
"Revolved body, Ø65 mm × 49.4 mm tall."
],
"text": "Revolved body, Ø65 mm × 49.4 mm tall."
} | {
"outer_d": {
"type": "float",
"default": 65,
"min": 6,
"max": 80,
"step": 1,
"group": "Body",
"label": "Outer diameter (mm)"
},
"length": {
"type": "float",
"default": 49.4,
"min": 14.8,
"max": 148.2,
"step": 1,
"group": "Body",
"label": "Length (mm)"
}
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329511 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"outer_d": {"type": 'float', "default": 65, "min": 6.0, "max": 80.0, "step": 1.0, "group": 'Body', "label": 'Outer diameter (mm)'},
"length": {"type": 'float', "default": 4... |
block_462c9f68_0948 | block | 1 | 1,177,329,512 | none | 2 | 4e72e53e9d05c31d | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 7300,
"surface_area": 3760,
"principal_moments": [
322000,
977000,
1200000
],
"n_faces": 13,
"n_edges": 33,
"n_vertices": 22
} | {
"lines": [
"Rectangular body, 20.97 × 9.3 × 39 mm (W×D×H).",
"Seven Ø1.2 mm holes in two staggered rows, 5.2 × 6.2 mm pitch."
],
"text": "Rectangular body, 20.97 × 9.3 × 39 mm (W×D×H). Seven Ø1.2 mm holes in two staggered rows, 5.2 × 6.2 mm pitch."
} | {
"block_w": {
"type": "float",
"default": 20.97,
"min": 15,
"max": 100,
"step": 1,
"group": "Body",
"label": "Block width (mm)"
},
"block_d": {
"type": "float",
"default": 9.3,
"min": 6,
"max": 100,
"step": 1,
"group": "Body",
"label": "Block depth (mm)"
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329512 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"block_w": {"type": 'float', "default": 20.97, "min": 15.0, "max": 100.0, "step": 1.0, "group": 'Body', "label": 'Block width (mm)'},
"block_d": {"type": 'float', "default"... |
swept_462c9f69_0949 | swept | 0 | 1,177,329,513 | mirror_x | 1 | 948d8731076cd6e7 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 4460,
"surface_area": 2150,
"principal_moments": [
109000,
1690000,
1750000
],
"n_faces": 3,
"n_edges": 3,
"n_vertices": 2
} | {
"lines": [
"Ø8.9 mm circular section swept along a curved path, ~60.8 mm span."
],
"text": "Ø8.9 mm circular section swept along a curved path, ~60.8 mm span."
} | {
"path_w": {
"type": "float",
"default": 54.14,
"min": 27.1,
"max": 97.5,
"step": 1,
"group": "Path",
"label": "Path width (mm)"
},
"path_h": {
"type": "float",
"default": 60.8,
"min": 30.4,
"max": 109.4,
"step": 1,
"group": "Path",
"label": "Path length (m... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329513 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"path_w": {"type": 'float', "default": 54.14, "min": 27.1, "max": 97.5, "step": 1.0, "group": 'Path', "label": 'Path width (mm)'},
"path_h": {"type": 'float', "default": 60... |
threaded_462c9f6a_0950 | threaded | 1 | 1,177,329,514 | none | 1 | 01b647eaa62f9922 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 8920,
"surface_area": 5210,
"principal_moments": [
454000,
1880000,
1880000
],
"n_faces": 255,
"n_edges": 935,
"n_vertices": 682
} | {
"lines": [
"M10x1.5 internal thread, 47.2 mm long."
],
"text": "M10x1.5 internal thread, 47.2 mm long."
} | {
"major_d": {
"type": "float",
"default": 10,
"min": 4,
"max": 24,
"step": 0.5,
"group": "Thread",
"label": "Major diameter (mm)"
},
"pitch": {
"type": "float",
"default": 1.5,
"min": 0.75,
"max": 3,
"step": 0.05,
"group": "Thread",
"label": "Pitch (mm)"
... | import cadquery as cq
from bd_warehouse import thread as _bdt
import build123d as _bd
# Generated by CadQuarry v0.6.0 — seed 1177329514 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"major_d": {"type": 'float', "default": 10.0, "min": 4.0, "max": 24.0, "step": 0.5, "group": 'Thread', "label": ... |
tapped_462c9f6b_0951 | tapped | 0 | 1,177,329,515 | mirror_xy | 1 | a883684511181398 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 11900,
"surface_area": 3880,
"principal_moments": [
1060000,
1060000,
1470000
],
"n_faces": 122,
"n_edges": 330,
"n_vertices": 210
} | {
"lines": [
"One M8x1.25 tapped hole in a plate."
],
"text": "One M8x1.25 tapped hole in a plate."
} | {
"major_d": {
"type": "float",
"default": 8,
"min": 3,
"max": 24,
"step": 0.5,
"group": "Thread",
"label": "Thread major Ø (mm)"
},
"pitch": {
"type": "float",
"default": 1.25,
"min": 0.35000000000000003,
"max": 3.5,
"step": 0.05,
"group": "Thread",
"label"... | import cadquery as cq
from bd_warehouse import thread as _bdt
import build123d as _bd
# Generated by CadQuarry v0.6.0 — seed 1177329515 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"major_d": {"type": 'float', "default": 8.0, "min": 3.0, "max": 24.0, "step": 0.5, "group": 'Thread', "label": '... |
tapped_462c9f6c_0952 | tapped | 2 | 1,177,329,516 | mirror_xy | 1 | f3ba48d3a7d18e2d | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 8430,
"surface_area": 3030,
"principal_moments": [
600000,
600000,
731000
],
"n_faces": 119,
"n_edges": 321,
"n_vertices": 204
} | {
"lines": [
"One M8x1.25 tapped hole in a cylinder."
],
"text": "One M8x1.25 tapped hole in a cylinder."
} | {
"major_d": {
"type": "float",
"default": 8,
"min": 3,
"max": 24,
"step": 0.5,
"group": "Thread",
"label": "Thread major Ø (mm)"
},
"pitch": {
"type": "float",
"default": 1.25,
"min": 0.35000000000000003,
"max": 3.5,
"step": 0.05,
"group": "Thread",
"label"... | import cadquery as cq
from bd_warehouse import thread as _bdt
import build123d as _bd
# Generated by CadQuarry v0.6.0 — seed 1177329516 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"major_d": {"type": 'float', "default": 8.0, "min": 3.0, "max": 24.0, "step": 0.5, "group": 'Thread', "label": '... |
plate_462c9f6d_0953 | plate | 1 | 1,177,329,517 | radial | 2 | a91e7fdb3cddee12 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 62000,
"surface_area": 23600,
"principal_moments": [
52299999.99999999,
56799999.99999999,
109000000
],
"n_faces": 10,
"n_edges": 24,
"n_vertices": 16
} | {
"lines": [
"Rectangular body, 104.42 × 100.2 × 6 mm (W×D×H).",
"Four Ø6.4 mm holes on a Ø62.6 mm bolt circle."
],
"text": "Rectangular body, 104.42 × 100.2 × 6 mm (W×D×H). Four Ø6.4 mm holes on a Ø62.6 mm bolt circle."
} | {
"plate_w": {
"type": "float",
"default": 104.42,
"min": 20,
"max": 120,
"step": 1,
"group": "Body",
"label": "Plate width (mm)"
},
"plate_d": {
"type": "float",
"default": 100.2,
"min": 8,
"max": 120,
"step": 1,
"group": "Body",
"label": "Plate depth (mm)"... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329517 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"plate_w": {"type": 'float', "default": 104.42, "min": 20.0, "max": 120.0, "step": 1.0, "group": 'Body', "label": 'Plate width (mm)'},
"plate_d": {"type": 'float', "default... |
bracket_462c9f6e_0954 | bracket | 3 | 1,177,329,518 | none | 1 | cbe0528ecc074b03 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 18700,
"surface_area": 11000,
"principal_moments": [
5470000,
22200000,
25999999.999999996
],
"n_faces": 19,
"n_edges": 51,
"n_vertices": 34
} | {
"lines": [
"C-channel bracket: base leg 85 mm, vertical leg 51.6 mm, 23.92 mm wide, 4 mm thick; 1 × Ø3.2 mm hole per leg; 4.2 mm corner gusset."
],
"text": "C-channel bracket: base leg 85 mm, vertical leg 51.6 mm, 23.92 mm wide, 4 mm thick; 1 × Ø3.2 mm hole per leg; 4.2 mm corner gusset."
} | {
"base_len": {
"type": "float",
"default": 85,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Base leg length (mm)"
},
"vert_len": {
"type": "float",
"default": 51.6,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Vertical leg leng... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329518 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_len": {"type": 'float', "default": 85, "min": 25.0, "max": 90.0, "step": 1.0, "group": 'Body', "label": 'Base leg length (mm)'},
"vert_len": {"type": 'float', "defaul... |
plate_462c9f6f_0955 | plate | 1 | 1,177,329,519 | mirror_x | 2 | d73005e0bc299e8d | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 22700,
"surface_area": 7410,
"principal_moments": [
1770000,
12299999.999999998,
13699999.999999998
],
"n_faces": 10,
"n_edges": 24,
"n_vertices": 16
} | {
"lines": [
"Rectangular body, 80.79 × 29.2 × 10 mm (W×D×H).",
"Four Ø5.3 mm holes at the corners, 56.553 × 20.44 mm spacing."
],
"text": "Rectangular body, 80.79 × 29.2 × 10 mm (W×D×H). Four Ø5.3 mm holes at the corners, 56.553 × 20.44 mm spacing."
} | {
"plate_w": {
"type": "float",
"default": 80.79,
"min": 20,
"max": 120,
"step": 1,
"group": "Body",
"label": "Plate width (mm)"
},
"plate_d": {
"type": "float",
"default": 29.2,
"min": 8,
"max": 120,
"step": 1,
"group": "Body",
"label": "Plate depth (mm)"
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329519 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"plate_w": {"type": 'float', "default": 80.79, "min": 20.0, "max": 120.0, "step": 1.0, "group": 'Body', "label": 'Plate width (mm)'},
"plate_d": {"type": 'float', "default"... |
revolved_462c9f70_0956 | revolved | 1 | 1,177,329,520 | mirror_xy | 1 | 640670f531213721 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 543000,
"surface_area": 75900,
"principal_moments": [
514000000,
1850000000,
1850000000
],
"n_faces": 4,
"n_edges": 6,
"n_vertices": 4
} | {
"lines": [
"Revolved body, Ø75.06 mm × 187.4 mm tall with Ø44.1 mm bore."
],
"text": "Revolved body, Ø75.06 mm × 187.4 mm tall with Ø44.1 mm bore."
} | {
"outer_d": {
"type": "float",
"default": 75.06,
"min": 6,
"max": 80,
"step": 1,
"group": "Body",
"label": "Outer diameter (mm)"
},
"length": {
"type": "float",
"default": 187.4,
"min": 56.2,
"max": 320,
"step": 1,
"group": "Body",
"label": "Length (mm)"
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329520 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"outer_d": {"type": 'float', "default": 75.06, "min": 6.0, "max": 80.0, "step": 1.0, "group": 'Body', "label": 'Outer diameter (mm)'},
"length": {"type": 'float', "default"... |
ribbed_462c9f71_0957 | ribbed | 1 | 1,177,329,521 | mirror_x | 2 | b65337849d3b9996 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 44900,
"surface_area": 26700,
"principal_moments": [
18700000,
35300000,
49499999.99999999
],
"n_faces": 46,
"n_edges": 112,
"n_vertices": 68
} | {
"lines": [
"Rectangular body, 95 × 50.2 × 4 mm (W×D×H).",
"Five ribs, 3.6 mm thick, 18.9 mm tall."
],
"text": "Rectangular body, 95 × 50.2 × 4 mm (W×D×H). Five ribs, 3.6 mm thick, 18.9 mm tall."
} | {
"base_w": {
"type": "float",
"default": 95,
"min": 20,
"max": 120,
"step": 1,
"group": "Base",
"label": "Base width (mm)"
},
"base_d": {
"type": "float",
"default": 50.2,
"min": 15,
"max": 120,
"step": 1,
"group": "Base",
"label": "Base depth (mm)"
},
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329521 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_w": {"type": 'float', "default": 95, "min": 20.0, "max": 120.0, "step": 1.0, "group": 'Base', "label": 'Base width (mm)'},
"base_d": {"type": 'float', "default": 50.2... |
bracket_462c9f72_0958 | bracket | 3 | 1,177,329,522 | none | 1 | f4709858c6f632e4 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 3650,
"surface_area": 2580,
"principal_moments": [
197000,
597000,
634000
],
"n_faces": 14,
"n_edges": 37,
"n_vertices": 24
} | {
"lines": [
"L-bracket: base leg 35 mm, vertical leg 26.4 mm, 16.14 mm wide, 4 mm thick; 1 × Ø6.4 mm hole per leg; 3.6 mm corner gusset."
],
"text": "L-bracket: base leg 35 mm, vertical leg 26.4 mm, 16.14 mm wide, 4 mm thick; 1 × Ø6.4 mm hole per leg; 3.6 mm corner gusset."
} | {
"base_len": {
"type": "float",
"default": 35,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Base leg length (mm)"
},
"vert_len": {
"type": "float",
"default": 26.4,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Vertical leg leng... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329522 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_len": {"type": 'float', "default": 35, "min": 25.0, "max": 90.0, "step": 1.0, "group": 'Body', "label": 'Base leg length (mm)'},
"vert_len": {"type": 'float', "defaul... |
flanged_462c9f73_0959 | flanged | 2 | 1,177,329,523 | radial | 3 | 3463e30aa09bc4f7 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 153000,
"surface_area": 37900,
"principal_moments": [
126000000,
126000000,
158000000
],
"n_faces": 18,
"n_edges": 37,
"n_vertices": 22
} | {
"lines": [
"Revolved body, Ø54.47 mm × 54.8 mm tall with Ø22.8 mm bore, Ø125.1 mm × 4.9 mm flange.",
"Four Ø6.4 mm holes on a Ø75 mm bolt circle.",
"Chamfer 0.8 mm on the >Z or <Z edges."
],
"text": "Revolved body, Ø54.47 mm × 54.8 mm tall with Ø22.8 mm bore, Ø125.1 mm × 4.9 mm flange. Four Ø6.4 mm ... | {
"outer_d": {
"type": "float",
"default": 54.47,
"min": 20,
"max": 100,
"step": 1,
"group": "Body",
"label": "Outer diameter (mm)"
},
"length": {
"type": "float",
"default": 54.8,
"min": 16.4,
"max": 137,
"step": 1,
"group": "Body",
"label": "Length (mm)"
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329523 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"outer_d": {"type": 'float', "default": 54.47, "min": 20.0, "max": 100.0, "step": 1.0, "group": 'Body', "label": 'Outer diameter (mm)'},
"length": {"type": 'float', "defaul... |
bracket_462c9f74_0960 | bracket | 1 | 1,177,329,524 | mirror_x | 1 | c28ff0936d025af8 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 42500,
"surface_area": 14800,
"principal_moments": [
13299999.999999998,
93599999.99999999,
103000000
],
"n_faces": 12,
"n_edges": 30,
"n_vertices": 20
} | {
"lines": [
"Z-bracket: base leg 87.08 mm, vertical leg 90 mm, top leg 66.5 mm, 23.39 mm wide, 8 mm thick; 1 × Ø3.2 mm hole per leg."
],
"text": "Z-bracket: base leg 87.08 mm, vertical leg 90 mm, top leg 66.5 mm, 23.39 mm wide, 8 mm thick; 1 × Ø3.2 mm hole per leg."
} | {
"base_len": {
"type": "float",
"default": 87.08,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Base leg length (mm)"
},
"vert_len": {
"type": "float",
"default": 90,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Vertical leg len... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329524 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_len": {"type": 'float', "default": 87.08, "min": 25.0, "max": 90.0, "step": 1.0, "group": 'Body', "label": 'Base leg length (mm)'},
"vert_len": {"type": 'float', "def... |
sketched_462c9f75_0961 | sketched | 0 | 1,177,329,525 | none | 1 | 526db20ce572b20d | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 32200,
"surface_area": 6150,
"principal_moments": [
4950000,
5580000,
8380000
],
"n_faces": 11,
"n_edges": 25,
"n_vertices": 16
} | {
"lines": [
"freeform sketched section (6 segments: 1 straight, 3 arcs, 2 curves), ~43.38 × 40.163 mm, extruded 20 mm thick with a 4.4° draft."
],
"text": "freeform sketched section (6 segments: 1 straight, 3 arcs, 2 curves), ~43.38 × 40.163 mm, extruded 20 mm thick with a 4.4° draft."
} | {
"sk_w": {
"type": "float",
"default": 60,
"min": 30,
"max": 108,
"step": 1,
"group": "Sketch",
"label": "Sketch width (mm)"
},
"sk_h": {
"type": "float",
"default": 65,
"min": 32.5,
"max": 117,
"step": 1,
"group": "Sketch",
"label": "Sketch height (mm)"
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329525 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"sk_w": {"type": 'float', "default": 60, "min": 30.0, "max": 108.0, "step": 1.0, "group": 'Sketch', "label": 'Sketch width (mm)'},
"sk_h": {"type": 'float', "default": 65, ... |
revolved_462c9f76_0962 | revolved | 2 | 1,177,329,526 | none | 1 | ab2f886b324ca398 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 54200,
"surface_area": 16400,
"principal_moments": [
7820000,
55399999.99999999,
55399999.99999999
],
"n_faces": 4,
"n_edges": 6,
"n_vertices": 4
} | {
"lines": [
"Revolved body, Ø30 mm × 106.7 mm tall with Ø15.9 mm bore."
],
"text": "Revolved body, Ø30 mm × 106.7 mm tall with Ø15.9 mm bore."
} | {
"outer_d": {
"type": "float",
"default": 30,
"min": 6,
"max": 80,
"step": 1,
"group": "Body",
"label": "Outer diameter (mm)"
},
"length": {
"type": "float",
"default": 106.7,
"min": 32,
"max": 320,
"step": 1,
"group": "Body",
"label": "Length (mm)"
},
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329526 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"outer_d": {"type": 'float', "default": 30, "min": 6.0, "max": 80.0, "step": 1.0, "group": 'Body', "label": 'Outer diameter (mm)'},
"length": {"type": 'float', "default": 1... |
compound_462c9f77_0963 | compound | 3 | 1,177,329,527 | none | 7 | aeedb7871953cca1 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 246000,
"surface_area": 29400,
"principal_moments": [
139000000,
181000000,
189000000
],
"n_faces": 30,
"n_edges": 70,
"n_vertices": 44
} | {
"lines": [
"Rectangular body, 75.1 × 56.3 × 59.5 mm (W×D×H).",
"Ø13.3 mm circular section attachment, 6.8 mm long, from front face with a Ø6.4 mm bore.",
"Ø13.3 mm circular section attachment, 6.8 mm long, from right face with a Ø6.4 mm bore.",
"Ø13.3 mm circular section attachment, 6.8 mm long, fro... | {
"block_w": {
"type": "float",
"default": 75.1,
"min": 20,
"max": 120,
"step": 1,
"group": "Body",
"label": "Body width (mm)"
},
"block_d": {
"type": "float",
"default": 56.3,
"min": 15,
"max": 120,
"step": 1,
"group": "Body",
"label": "Body depth (mm)"
}... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329527 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"block_w": {"type": 'float', "default": 75.1, "min": 20.0, "max": 120.0, "step": 1.0, "group": 'Body', "label": 'Body width (mm)'},
"block_d": {"type": 'float', "default": ... |
bracket_462c9f78_0964 | bracket | 2 | 1,177,329,528 | none | 1 | bbb3c662ef6322b8 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 75200,
"surface_area": 28900,
"principal_moments": [
78400000,
98199999.99999999,
146000000
],
"n_faces": 19,
"n_edges": 51,
"n_vertices": 34
} | {
"lines": [
"C-channel bracket: base leg 80.14 mm, vertical leg 90 mm, 49.85 mm wide, 6 mm thick; 1 × Ø5.3 mm hole per leg; 5.4 mm corner gusset."
],
"text": "C-channel bracket: base leg 80.14 mm, vertical leg 90 mm, 49.85 mm wide, 6 mm thick; 1 × Ø5.3 mm hole per leg; 5.4 mm corner gusset."
} | {
"base_len": {
"type": "float",
"default": 80.14,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Base leg length (mm)"
},
"vert_len": {
"type": "float",
"default": 90,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Vertical leg len... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329528 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_len": {"type": 'float', "default": 80.14, "min": 25.0, "max": 90.0, "step": 1.0, "group": 'Body', "label": 'Base leg length (mm)'},
"vert_len": {"type": 'float', "def... |
gear_462c9f79_0965 | gear | 0 | 1,177,329,529 | mirror_xy | 1 | 541af6f4ecc17692 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 130000,
"surface_area": 27000,
"principal_moments": [
92099999.99999999,
92099999.99999999,
179000000
],
"n_faces": 212,
"n_edges": 630,
"n_vertices": 420
} | {
"lines": [
"Spur gear, module 3 mm, 35 teeth (pitch Ø105 mm), face width 15.1 mm."
],
"text": "Spur gear, module 3 mm, 35 teeth (pitch Ø105 mm), face width 15.1 mm."
} | {
"module": {
"type": "float",
"default": 3,
"min": 1,
"max": 6,
"step": 0.25,
"group": "Gear",
"label": "Module (mm)"
},
"teeth": {
"type": "int",
"default": 35,
"min": 10,
"max": 40,
"step": 1,
"group": "Gear",
"label": "Number of teeth"
},
"gear_w": {... | import cadquery as cq
import math
import py_gearworks as _gw
# Generated by CadQuarry v0.6.0 — seed 1177329529 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"module": {"type": 'float', "default": 3.0, "min": 1.0, "max": 6.0, "step": 0.25, "group": 'Gear', "label": 'Module (mm)'},
"teeth": ... |
revolved_462c9f7a_0966 | revolved | 1 | 1,177,329,530 | mirror_x | 1 | 5db7cb6b0a1389e2 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 26500,
"surface_area": 6690,
"principal_moments": [
3760000,
5270000,
5270000
],
"n_faces": 4,
"n_edges": 6,
"n_vertices": 4
} | {
"lines": [
"Revolved body, Ø31.6 mm × 39.2 mm tall with Ø11.8 mm bore."
],
"text": "Revolved body, Ø31.6 mm × 39.2 mm tall with Ø11.8 mm bore."
} | {
"outer_d": {
"type": "float",
"default": 31.6,
"min": 6,
"max": 80,
"step": 1,
"group": "Body",
"label": "Outer diameter (mm)"
},
"length": {
"type": "float",
"default": 39.2,
"min": 11.8,
"max": 117.6,
"step": 1,
"group": "Body",
"label": "Length (mm)"
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329530 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"outer_d": {"type": 'float', "default": 31.6, "min": 6.0, "max": 80.0, "step": 1.0, "group": 'Body', "label": 'Outer diameter (mm)'},
"length": {"type": 'float', "default":... |
threaded_462c9f7b_0967 | threaded | 0 | 1,177,329,531 | mirror_x | 1 | a4d7a20ef1680fc6 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 796,
"surface_area": 775,
"principal_moments": [
5300,
27200,
27200
],
"n_faces": 160,
"n_edges": 406,
"n_vertices": 248
} | {
"lines": [
"M8x1.25 external thread, 19.4 mm long."
],
"text": "M8x1.25 external thread, 19.4 mm long."
} | {
"major_d": {
"type": "float",
"default": 8,
"min": 4,
"max": 24,
"step": 0.5,
"group": "Thread",
"label": "Major diameter (mm)"
},
"pitch": {
"type": "float",
"default": 1.25,
"min": 0.62,
"max": 2.5,
"step": 0.05,
"group": "Thread",
"label": "Pitch (mm)"
... | import cadquery as cq
from bd_warehouse import thread as _bdt
import build123d as _bd
# Generated by CadQuarry v0.6.0 — seed 1177329531 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"major_d": {"type": 'float', "default": 8.0, "min": 4.0, "max": 24.0, "step": 0.5, "group": 'Thread', "label": '... |
revolved_462c9f7c_0968 | revolved | 1 | 1,177,329,532 | mirror_x | 1 | b23a5e00ecebf114 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 38300,
"surface_area": 10900,
"principal_moments": [
3450000,
28799999.999999996,
28799999.999999996
],
"n_faces": 4,
"n_edges": 6,
"n_vertices": 4
} | {
"lines": [
"Revolved body, Ø25 mm × 92.1 mm tall with Ø9.8 mm bore."
],
"text": "Revolved body, Ø25 mm × 92.1 mm tall with Ø9.8 mm bore."
} | {
"outer_d": {
"type": "float",
"default": 25,
"min": 6,
"max": 80,
"step": 1,
"group": "Body",
"label": "Outer diameter (mm)"
},
"length": {
"type": "float",
"default": 92.1,
"min": 27.6,
"max": 276.3,
"step": 1,
"group": "Body",
"label": "Length (mm)"
},... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329532 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"outer_d": {"type": 'float', "default": 25, "min": 6.0, "max": 80.0, "step": 1.0, "group": 'Body', "label": 'Outer diameter (mm)'},
"length": {"type": 'float', "default": 9... |
threaded_462c9f7d_0969 | threaded | 2 | 1,177,329,533 | none | 1 | 58e70964ee73b548 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 1840,
"surface_area": 1510,
"principal_moments": [
19400,
136000,
136000
],
"n_faces": 150,
"n_edges": 380,
"n_vertices": 232
} | {
"lines": [
"Tr 10x2 external thread, 29 mm long."
],
"text": "Tr 10x2 external thread, 29 mm long."
} | {
"thread_size": {
"type": "enum",
"default": "10x2",
"choices": [
"8x1.5",
"10x2",
"12x3",
"14x3",
"16x4",
"18x4",
"20x4",
"24x5",
"28x5",
"30x6",
"36x6",
"40x7"
],
"group": "Thread",
"label": "Size designation"
},
"t... | import cadquery as cq
from bd_warehouse import thread as _bdt
import build123d as _bd
# Generated by CadQuarry v0.6.0 — seed 1177329533 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"thread_size": {"type": 'enum', "default": '10x2', "choices": ['8x1.5', '10x2', '12x3', '14x3', '16x4', '18x4', ... |
block_462c9f7e_0970 | block | 1 | 1,177,329,534 | none | 2 | bb7db8a914698ade | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 384000,
"surface_area": 41600,
"principal_moments": [
340000000,
375000000,
606000000
],
"n_faces": 10,
"n_edges": 24,
"n_vertices": 16
} | {
"lines": [
"Rectangular body, 95 × 41.4 × 100 mm (W×D×H).",
"Four Ø5.3 mm holes at the corners, 66.5 × 28.98 mm spacing."
],
"text": "Rectangular body, 95 × 41.4 × 100 mm (W×D×H). Four Ø5.3 mm holes at the corners, 66.5 × 28.98 mm spacing."
} | {
"block_w": {
"type": "float",
"default": 95,
"min": 15,
"max": 100,
"step": 1,
"group": "Body",
"label": "Block width (mm)"
},
"block_d": {
"type": "float",
"default": 41.4,
"min": 6,
"max": 100,
"step": 1,
"group": "Body",
"label": "Block depth (mm)"
},... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329534 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"block_w": {"type": 'float', "default": 95, "min": 15.0, "max": 100.0, "step": 1.0, "group": 'Body', "label": 'Block width (mm)'},
"block_d": {"type": 'float', "default": 4... |
tapped_462c9f7f_0971 | tapped | 0 | 1,177,329,535 | none | 1 | 591dbbae50a71b01 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 28100,
"surface_area": 6780,
"principal_moments": [
4580000,
4580000,
7430000
],
"n_faces": 111,
"n_edges": 389,
"n_vertices": 280
} | {
"lines": [
"One M10x1.5 tapped hole in a plate."
],
"text": "One M10x1.5 tapped hole in a plate."
} | {
"major_d": {
"type": "float",
"default": 10,
"min": 3,
"max": 24,
"step": 0.5,
"group": "Thread",
"label": "Thread major Ø (mm)"
},
"pitch": {
"type": "float",
"default": 1.5,
"min": 0.35000000000000003,
"max": 3.5,
"step": 0.05,
"group": "Thread",
"label"... | import cadquery as cq
from bd_warehouse import thread as _bdt
import build123d as _bd
# Generated by CadQuarry v0.6.0 — seed 1177329535 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"major_d": {"type": 'float', "default": 10.0, "min": 3.0, "max": 24.0, "step": 0.5, "group": 'Thread', "label": ... |
lofted_462c9f80_0972 | lofted | 1 | 1,177,329,536 | mirror_x | 2 | bb4fa9b98e166c31 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 85000,
"surface_area": 14000,
"principal_moments": [
28899999.999999996,
31799999.999999996,
31899999.999999996
],
"n_faces": 13,
"n_edges": 33,
"n_vertices": 22
} | {
"lines": [
"Lofted body through 2 sections: 6-sided polygon section, 60.76 mm across corners → 37.1 × 37.1 mm rectangular section.",
"One Ø15.2 mm hole in a 1×1 grid, 10 × 10 mm pitch."
],
"text": "Lofted body through 2 sections: 6-sided polygon section, 60.76 mm across corners → 37.1 × 37.1 mm rectangu... | {
"loft_base": {
"type": "float",
"default": 60.76,
"min": 30.4,
"max": 97.2,
"step": 1,
"group": "Body",
"label": "Base size (mm)"
},
"loft_top": {
"type": "float",
"default": 37.1,
"min": 14.8,
"max": 72.9,
"step": 1,
"group": "Body",
"label": "Top size (m... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329536 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"loft_base": {"type": 'float', "default": 60.76, "min": 30.4, "max": 97.2, "step": 1.0, "group": 'Body', "label": 'Base size (mm)'},
"loft_top": {"type": 'float', "default"... |
plate_462c9f81_0973 | plate | 0 | 1,177,329,537 | mirror_xy | 1 | 3266cd9399c484f5 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 16100,
"surface_area": 5520,
"principal_moments": [
1690000,
4670000,
6190000
],
"n_faces": 6,
"n_edges": 12,
"n_vertices": 8
} | {
"lines": [
"Rectangular body, 58.43 × 34.5 × 8 mm (W×D×H)."
],
"text": "Rectangular body, 58.43 × 34.5 × 8 mm (W×D×H)."
} | {
"plate_w": {
"type": "float",
"default": 58.43,
"min": 20,
"max": 120,
"step": 1,
"group": "Body",
"label": "Plate width (mm)"
},
"plate_d": {
"type": "float",
"default": 34.5,
"min": 8,
"max": 120,
"step": 1,
"group": "Body",
"label": "Plate depth (mm)"
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329537 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"plate_w": {"type": 'float', "default": 58.43, "min": 20.0, "max": 120.0, "step": 1.0, "group": 'Body', "label": 'Plate width (mm)'},
"plate_d": {"type": 'float', "default"... |
ribbed_462c9f82_0974 | ribbed | 1 | 1,177,329,538 | none | 2 | c81a4b2640cdebca | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 13400,
"surface_area": 7360,
"principal_moments": [
1820000,
4830000,
6340000
],
"n_faces": 22,
"n_edges": 52,
"n_vertices": 32
} | {
"lines": [
"Rectangular body, 59.68 × 36.1 × 5 mm (W×D×H).",
"Two ribs, 2.8 mm thick, 9.7 mm tall."
],
"text": "Rectangular body, 59.68 × 36.1 × 5 mm (W×D×H). Two ribs, 2.8 mm thick, 9.7 mm tall."
} | {
"base_w": {
"type": "float",
"default": 59.68,
"min": 20,
"max": 120,
"step": 1,
"group": "Base",
"label": "Base width (mm)"
},
"base_d": {
"type": "float",
"default": 36.1,
"min": 15,
"max": 120,
"step": 1,
"group": "Base",
"label": "Base depth (mm)"
},... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329538 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_w": {"type": 'float', "default": 59.68, "min": 20.0, "max": 120.0, "step": 1.0, "group": 'Base', "label": 'Base width (mm)'},
"base_d": {"type": 'float', "default": 3... |
plate_462c9f83_0975 | plate | 1 | 1,177,329,539 | none | 2 | 1f1eec4b1eab1eba | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 3020,
"surface_area": 1940,
"principal_moments": [
87600,
307000,
382000
],
"n_faces": 10,
"n_edges": 24,
"n_vertices": 16
} | {
"lines": [
"Rectangular body, 35 × 18.2 × 5 mm (W×D×H).",
"Four Ø3.2 mm holes at the corners, 24.5 × 12.74 mm spacing."
],
"text": "Rectangular body, 35 × 18.2 × 5 mm (W×D×H). Four Ø3.2 mm holes at the corners, 24.5 × 12.74 mm spacing."
} | {
"plate_w": {
"type": "float",
"default": 35,
"min": 20,
"max": 120,
"step": 1,
"group": "Body",
"label": "Plate width (mm)"
},
"plate_d": {
"type": "float",
"default": 18.2,
"min": 8,
"max": 120,
"step": 1,
"group": "Body",
"label": "Plate depth (mm)"
},... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329539 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"plate_w": {"type": 'float', "default": 35, "min": 20.0, "max": 120.0, "step": 1.0, "group": 'Body', "label": 'Plate width (mm)'},
"plate_d": {"type": 'float', "default": 1... |
threaded_462c9f84_0976 | threaded | 3 | 1,177,329,540 | mirror_x | 1 | 9a34a3bf15540e17 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 2470,
"surface_area": 1850,
"principal_moments": [
26700,
292000,
292000
],
"n_faces": 524,
"n_edges": 1442,
"n_vertices": 920
} | {
"lines": [
"M10x1.25 external thread, 36.9 mm long."
],
"text": "M10x1.25 external thread, 36.9 mm long."
} | {
"major_d": {
"type": "float",
"default": 10,
"min": 4,
"max": 24,
"step": 0.5,
"group": "Thread",
"label": "Major diameter (mm)"
},
"pitch": {
"type": "float",
"default": 1.25,
"min": 0.62,
"max": 2.5,
"step": 0.05,
"group": "Thread",
"label": "Pitch (mm)"... | import cadquery as cq
from bd_warehouse import thread as _bdt
import build123d as _bd
# Generated by CadQuarry v0.6.0 — seed 1177329540 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"major_d": {"type": 'float', "default": 10.0, "min": 4.0, "max": 24.0, "step": 0.5, "group": 'Thread', "label": ... |
gear_462c9f85_0977 | gear | 1 | 1,177,329,541 | mirror_xy | 1 | f486d13f243caf97 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 15400,
"surface_area": 6520,
"principal_moments": [
2590000,
2590000,
5010000
],
"n_faces": 153,
"n_edges": 453,
"n_vertices": 302
} | {
"lines": [
"Spur gear, module 2 mm, 25 teeth (pitch Ø50 mm), face width 8.2 mm, Ø8.8 mm bore."
],
"text": "Spur gear, module 2 mm, 25 teeth (pitch Ø50 mm), face width 8.2 mm, Ø8.8 mm bore."
} | {
"module": {
"type": "float",
"default": 2,
"min": 1,
"max": 6,
"step": 0.25,
"group": "Gear",
"label": "Module (mm)"
},
"teeth": {
"type": "int",
"default": 25,
"min": 10,
"max": 40,
"step": 1,
"group": "Gear",
"label": "Number of teeth"
},
"gear_w": {... | import cadquery as cq
import math
import py_gearworks as _gw
# Generated by CadQuarry v0.6.0 — seed 1177329541 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"module": {"type": 'float', "default": 2.0, "min": 1.0, "max": 6.0, "step": 0.25, "group": 'Gear', "label": 'Module (mm)'},
"teeth": ... |
tapped_462c9f86_0978 | tapped | 3 | 1,177,329,542 | mirror_xy | 1 | 17ef560387018049 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 43200,
"surface_area": 11200,
"principal_moments": [
9680000,
20700000,
29399999.999999996
],
"n_faces": 534,
"n_edges": 1460,
"n_vertices": 928
} | {
"lines": [
"Four M4x0.7 tapped holes in a plate."
],
"text": "Four M4x0.7 tapped holes in a plate."
} | {
"major_d": {
"type": "float",
"default": 4,
"min": 3,
"max": 24,
"step": 0.5,
"group": "Thread",
"label": "Thread major Ø (mm)"
},
"pitch": {
"type": "float",
"default": 0.7000000000000001,
"min": 0.35000000000000003,
"max": 3.5,
"step": 0.05,
"group": "Thread... | import cadquery as cq
from bd_warehouse import thread as _bdt
import build123d as _bd
# Generated by CadQuarry v0.6.0 — seed 1177329542 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"major_d": {"type": 'float', "default": 4.0, "min": 3.0, "max": 24.0, "step": 0.5, "group": 'Thread', "label": '... |
compound_462c9f87_0979 | compound | 1 | 1,177,329,543 | mirror_x | 2 | d3cb4a6567bd54bf | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 227000,
"surface_area": 26600,
"principal_moments": [
117000000,
170000000,
173000000
],
"n_faces": 16,
"n_edges": 39,
"n_vertices": 26
} | {
"lines": [
"Rectangular body, 70 × 57 × 55.5 mm (W×D×H).",
"8-sided polygon section, 19.8 mm across corners attachment, 35.7 mm long, from left face with a Ø7.4 mm bore."
],
"text": "Rectangular body, 70 × 57 × 55.5 mm (W×D×H). 8-sided polygon section, 19.8 mm across corners attachment, 35.7 mm long, fr... | {
"block_w": {
"type": "float",
"default": 70,
"min": 15,
"max": 100,
"step": 1,
"group": "Body",
"label": "Block width (mm)"
},
"block_d": {
"type": "float",
"default": 57,
"min": 10,
"max": 100,
"step": 1,
"group": "Body",
"label": "Block depth (mm)"
},
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329543 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"block_w": {"type": 'float', "default": 70, "min": 15.0, "max": 100.0, "step": 1.0, "group": 'Body', "label": 'Block width (mm)'},
"block_d": {"type": 'float', "default": 5... |
bracket_462c9f88_0980 | bracket | 2 | 1,177,329,544 | none | 1 | 528bf1e5bc0b7b97 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 41100,
"surface_area": 12900,
"principal_moments": [
11999999.999999998,
23399999.999999996,
27699999.999999996
],
"n_faces": 14,
"n_edges": 37,
"n_vertices": 24
} | {
"lines": [
"L-bracket: base leg 65 mm, vertical leg 45.6 mm, 49.23 mm wide, 8 mm thick; 1 × Ø5.3 mm hole per leg; 6.9 mm corner gusset."
],
"text": "L-bracket: base leg 65 mm, vertical leg 45.6 mm, 49.23 mm wide, 8 mm thick; 1 × Ø5.3 mm hole per leg; 6.9 mm corner gusset."
} | {
"base_len": {
"type": "float",
"default": 65,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Base leg length (mm)"
},
"vert_len": {
"type": "float",
"default": 45.6,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Vertical leg leng... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329544 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_len": {"type": 'float', "default": 65, "min": 25.0, "max": 90.0, "step": 1.0, "group": 'Body', "label": 'Base leg length (mm)'},
"vert_len": {"type": 'float', "defaul... |
block_462c9f89_0981 | block | 2 | 1,177,329,545 | mirror_xy | 3 | 4c9bbb11d9293e1c | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 178000,
"surface_area": 25600,
"principal_moments": [
72900000,
160000000,
210000000
],
"n_faces": 14,
"n_edges": 36,
"n_vertices": 24
} | {
"lines": [
"Rectangular body, 65 × 28 × 100 mm (W×D×H).",
"Four Ø3.2 mm holes at the corners, 45.5 × 19.6 mm spacing.",
"Fillet radius 3.204 mm on vertical edges."
],
"text": "Rectangular body, 65 × 28 × 100 mm (W×D×H). Four Ø3.2 mm holes at the corners, 45.5 × 19.6 mm spacing. Fillet radius 3.204 m... | {
"block_w": {
"type": "float",
"default": 65,
"min": 15,
"max": 100,
"step": 1,
"group": "Body",
"label": "Block width (mm)"
},
"block_d": {
"type": "float",
"default": 28,
"min": 6,
"max": 100,
"step": 1,
"group": "Body",
"label": "Block depth (mm)"
},
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329545 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"block_w": {"type": 'float', "default": 65, "min": 15.0, "max": 100.0, "step": 1.0, "group": 'Body', "label": 'Block width (mm)'},
"block_d": {"type": 'float', "default": 2... |
ribbed_462c9f8a_0982 | ribbed | 2 | 1,177,329,546 | none | 2 | 2e6d0c87e25fa4ab | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 9250,
"surface_area": 5680,
"principal_moments": [
862000,
1090000,
1420000
],
"n_faces": 26,
"n_edges": 60,
"n_vertices": 40
} | {
"lines": [
"Rectangular body, 32 × 30.6 × 4 mm (W×D×H).",
"Four ribs, 3.8 mm thick, 13.7 mm tall."
],
"text": "Rectangular body, 32 × 30.6 × 4 mm (W×D×H). Four ribs, 3.8 mm thick, 13.7 mm tall."
} | {
"base_w": {
"type": "float",
"default": 32,
"min": 20,
"max": 120,
"step": 1,
"group": "Base",
"label": "Base width (mm)"
},
"base_d": {
"type": "float",
"default": 30.6,
"min": 15,
"max": 120,
"step": 1,
"group": "Base",
"label": "Base depth (mm)"
},
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329546 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_w": {"type": 'float', "default": 32.0, "min": 20.0, "max": 120.0, "step": 1.0, "group": 'Base', "label": 'Base width (mm)'},
"base_d": {"type": 'float', "default": 30... |
swept_462c9f8b_0983 | swept | 1 | 1,177,329,547 | mirror_xy | 1 | 9de2e4847d353936 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 12000,
"surface_area": 3710,
"principal_moments": [
313000,
5840000,
5840000
],
"n_faces": 3,
"n_edges": 3,
"n_vertices": 2
} | {
"lines": [
"Ø14.4 mm circular section swept along a curved path, ~75 mm span."
],
"text": "Ø14.4 mm circular section swept along a curved path, ~75 mm span."
} | {
"path_w": {
"type": "float",
"default": 38,
"min": 19,
"max": 68.4,
"step": 1,
"group": "Path",
"label": "Path width (mm)"
},
"path_h": {
"type": "float",
"default": 75,
"min": 37.5,
"max": 135,
"step": 1,
"group": "Path",
"label": "Path length (mm)"
},
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329547 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"path_w": {"type": 'float', "default": 38.0, "min": 19.0, "max": 68.4, "step": 1.0, "group": 'Path', "label": 'Path width (mm)'},
"path_h": {"type": 'float', "default": 75,... |
compound_462c9f8c_0984 | compound | 1 | 1,177,329,548 | none | 2 | 41512b22dd9dd05f | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 130000,
"surface_area": 22400,
"principal_moments": [
62299999.99999999,
81400000,
81400000
],
"n_faces": 10,
"n_edges": 21,
"n_vertices": 14
} | {
"lines": [
"Lofted body through 2 sections: 65 × 65 mm rectangular section → Ø40.8 mm circular section.",
"Ø33.4 mm circular section attachment, 30.8 mm long, from top face with a Ø19 mm bore."
],
"text": "Lofted body through 2 sections: 65 × 65 mm rectangular section → Ø40.8 mm circular section. Ø33.4 ... | {
"adapter_base": {
"type": "float",
"default": 65,
"min": 39,
"max": 97.5,
"step": 1,
"group": "Body",
"label": "Base size (mm)"
},
"adapter_top": {
"type": "float",
"default": 40.8,
"min": 20.4,
"max": 65,
"step": 1,
"group": "Body",
"label": "Top size (mm... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329548 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"adapter_base": {"type": 'float', "default": 65, "min": 39.0, "max": 97.5, "step": 1.0, "group": 'Body', "label": 'Base size (mm)'},
"adapter_top": {"type": 'float', "defau... |
gear_462c9f8d_0985 | gear | 2 | 1,177,329,549 | none | 1 | 74891c4b4ba7f3c1 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 110000,
"surface_area": 24700,
"principal_moments": [
71600000,
71600000,
139000000
],
"n_faces": 447,
"n_edges": 1113,
"n_vertices": 668
} | {
"lines": [
"Helical gear, module 2.5 mm, 37 teeth (pitch Ø92.5 mm), face width 14.9 mm, 22.4° helix (herringbone), Ø18.5 mm bore."
],
"text": "Helical gear, module 2.5 mm, 37 teeth (pitch Ø92.5 mm), face width 14.9 mm, 22.4° helix (herringbone), Ø18.5 mm bore."
} | {
"module": {
"type": "float",
"default": 2.5,
"min": 1,
"max": 6,
"step": 0.25,
"group": "Gear",
"label": "Module (mm)"
},
"teeth": {
"type": "int",
"default": 37,
"min": 10,
"max": 40,
"step": 1,
"group": "Gear",
"label": "Number of teeth"
},
"gear_w":... | import cadquery as cq
import math
import py_gearworks as _gw
# Generated by CadQuarry v0.6.0 — seed 1177329549 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"module": {"type": 'float', "default": 2.5, "min": 1.0, "max": 6.0, "step": 0.25, "group": 'Gear', "label": 'Module (mm)'},
"teeth": ... |
plate_462c9f8e_0986 | plate | 2 | 1,177,329,550 | mirror_x | 3 | 8c9c689afde07bcd | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 59800,
"surface_area": 18000,
"principal_moments": [
34800000,
40600000,
74800000
],
"n_faces": 18,
"n_edges": 44,
"n_vertices": 28
} | {
"lines": [
"Rectangular body, 90.34 × 83.5 × 8 mm (W×D×H).",
"Four Ø3.2 mm countersunk holes (82°) at the corners, 63.238 × 58.45 mm spacing.",
"Fillet radius 5.394 mm on vertical edges."
],
"text": "Rectangular body, 90.34 × 83.5 × 8 mm (W×D×H). Four Ø3.2 mm countersunk holes (82°) at the corners, ... | {
"plate_w": {
"type": "float",
"default": 90.34,
"min": 20,
"max": 120,
"step": 1,
"group": "Body",
"label": "Plate width (mm)"
},
"plate_d": {
"type": "float",
"default": 83.5,
"min": 8,
"max": 120,
"step": 1,
"group": "Body",
"label": "Plate depth (mm)"
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329550 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"plate_w": {"type": 'float', "default": 90.34, "min": 20.0, "max": 120.0, "step": 1.0, "group": 'Body', "label": 'Plate width (mm)'},
"plate_d": {"type": 'float', "default"... |
compound_462c9f8f_0987 | compound | 1 | 1,177,329,551 | mirror_x | 2 | 1f5da9291a990827 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 5080,
"surface_area": 1880,
"principal_moments": [
125000,
555000,
555000
],
"n_faces": 5,
"n_edges": 6,
"n_vertices": 4
} | {
"lines": [
"Ø15 mm circular section, extruded 23 mm thick.",
"Ø9.3 mm circular section attachment, 15 mm long, from top face."
],
"text": "Ø15 mm circular section, extruded 23 mm thick. Ø9.3 mm circular section attachment, 15 mm long, from top face."
} | {
"shaft_d": {
"type": "float",
"default": 15,
"min": 7.5,
"max": 27,
"step": 1,
"group": "Body",
"label": "Shaft diameter (mm)"
},
"shaft_len": {
"type": "float",
"default": 23,
"min": 9.2,
"max": 46,
"step": 1,
"group": "Body",
"label": "Shaft length (mm)"... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329551 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"shaft_d": {"type": 'float', "default": 15, "min": 7.5, "max": 27.0, "step": 1.0, "group": 'Body', "label": 'Shaft diameter (mm)'},
"shaft_len": {"type": 'float', "default"... |
swept_462c9f90_0988 | swept | 0 | 1,177,329,552 | mirror_xy | 1 | 7510bd44790177e6 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 16600,
"surface_area": 4960,
"principal_moments": [
1270000,
7980000,
8670000
],
"n_faces": 3,
"n_edges": 3,
"n_vertices": 2
} | {
"lines": [
"Ø16.7 mm circular section swept along a curved path, ~70 mm span."
],
"text": "Ø16.7 mm circular section swept along a curved path, ~70 mm span."
} | {
"path_w": {
"type": "float",
"default": 48.1,
"min": 24.1,
"max": 86.6,
"step": 1,
"group": "Path",
"label": "Path width (mm)"
},
"path_h": {
"type": "float",
"default": 70,
"min": 35,
"max": 126,
"step": 1,
"group": "Path",
"label": "Path length (mm)"
}... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329552 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"path_w": {"type": 'float', "default": 48.1, "min": 24.1, "max": 86.6, "step": 1.0, "group": 'Path', "label": 'Path width (mm)'},
"path_h": {"type": 'float', "default": 70,... |
tapped_462c9f91_0989 | tapped | 3 | 1,177,329,553 | mirror_xy | 1 | 4c1d3ddeb251f4ce | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 4100,
"surface_area": 2210,
"principal_moments": [
193000,
224000,
224000
],
"n_faces": 127,
"n_edges": 343,
"n_vertices": 218
} | {
"lines": [
"One M8x1.25 tapped hole in a cylinder."
],
"text": "One M8x1.25 tapped hole in a cylinder."
} | {
"major_d": {
"type": "float",
"default": 8,
"min": 3,
"max": 24,
"step": 0.5,
"group": "Thread",
"label": "Thread major Ø (mm)"
},
"pitch": {
"type": "float",
"default": 1.25,
"min": 0.35000000000000003,
"max": 3.5,
"step": 0.05,
"group": "Thread",
"label"... | import cadquery as cq
from bd_warehouse import thread as _bdt
import build123d as _bd
# Generated by CadQuarry v0.6.0 — seed 1177329553 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"major_d": {"type": 'float', "default": 8.0, "min": 3.0, "max": 24.0, "step": 0.5, "group": 'Thread', "label": '... |
bracket_462c9f92_0990 | bracket | 1 | 1,177,329,554 | none | 1 | d7ca08b33ad910f5 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 53200,
"surface_area": 17500,
"principal_moments": [
15099999.999999998,
116000000,
123000000
],
"n_faces": 12,
"n_edges": 30,
"n_vertices": 20
} | {
"lines": [
"Z-bracket: base leg 87.71 mm, vertical leg 72.5 mm, top leg 77.8 mm, 30 mm wide, 8 mm thick; 1 × Ø3.2 mm hole per leg."
],
"text": "Z-bracket: base leg 87.71 mm, vertical leg 72.5 mm, top leg 77.8 mm, 30 mm wide, 8 mm thick; 1 × Ø3.2 mm hole per leg."
} | {
"base_len": {
"type": "float",
"default": 87.71,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Base leg length (mm)"
},
"vert_len": {
"type": "float",
"default": 72.5,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Vertical leg l... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329554 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_len": {"type": 'float', "default": 87.71, "min": 25.0, "max": 90.0, "step": 1.0, "group": 'Body', "label": 'Base leg length (mm)'},
"vert_len": {"type": 'float', "def... |
ribbed_462c9f93_0991 | ribbed | 3 | 1,177,329,555 | mirror_xy | 2 | 1a05e9a8c1124ad7 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 34100,
"surface_area": 15800,
"principal_moments": [
7090000,
8860000,
11499999.999999998
],
"n_faces": 36,
"n_edges": 84,
"n_vertices": 56
} | {
"lines": [
"Rectangular body, 49.61 × 43.1 × 8 mm (W×D×H).",
"Six ribs, 3.7 mm thick, 19.3 mm tall."
],
"text": "Rectangular body, 49.61 × 43.1 × 8 mm (W×D×H). Six ribs, 3.7 mm thick, 19.3 mm tall."
} | {
"base_w": {
"type": "float",
"default": 49.61,
"min": 20,
"max": 120,
"step": 1,
"group": "Base",
"label": "Base width (mm)"
},
"base_d": {
"type": "float",
"default": 43.1,
"min": 15,
"max": 120,
"step": 1,
"group": "Base",
"label": "Base depth (mm)"
},... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329555 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_w": {"type": 'float', "default": 49.61, "min": 20.0, "max": 120.0, "step": 1.0, "group": 'Base', "label": 'Base width (mm)'},
"base_d": {"type": 'float', "default": 4... |
bracket_462c9f94_0992 | bracket | 1 | 1,177,329,556 | mirror_x | 1 | fff61d1b63b5fc84 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 8700,
"surface_area": 3660,
"principal_moments": [
462000,
2110000,
2250000
],
"n_faces": 11,
"n_edges": 27,
"n_vertices": 18
} | {
"lines": [
"Z-bracket: base leg 30 mm, vertical leg 34 mm, top leg 25 mm, 15 mm wide, 8 mm thick; 1 × Ø3.2 mm hole per leg."
],
"text": "Z-bracket: base leg 30 mm, vertical leg 34 mm, top leg 25 mm, 15 mm wide, 8 mm thick; 1 × Ø3.2 mm hole per leg."
} | {
"base_len": {
"type": "float",
"default": 30,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Base leg length (mm)"
},
"vert_len": {
"type": "float",
"default": 34,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Vertical leg length... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329556 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_len": {"type": 'float', "default": 30, "min": 25.0, "max": 90.0, "step": 1.0, "group": 'Body', "label": 'Base leg length (mm)'},
"vert_len": {"type": 'float', "defaul... |
revolved_462c9f95_0993 | revolved | 2 | 1,177,329,557 | mirror_x | 2 | a1952333fe13b225 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 235,
"surface_area": 321,
"principal_moments": [
1810,
2100,
2100
],
"n_faces": 12,
"n_edges": 20,
"n_vertices": 12
} | {
"lines": [
"Revolved body, Ø7.16 mm × 8 mm tall with Ø3.4 mm bore, 0.9 mm-wide groove 0.34 mm deep.",
"Chamfer 0.5 mm on the >Z or <Z edges."
],
"text": "Revolved body, Ø7.16 mm × 8 mm tall with Ø3.4 mm bore, 0.9 mm-wide groove 0.34 mm deep. Chamfer 0.5 mm on the >Z or <Z edges."
} | {
"outer_d": {
"type": "float",
"default": 7.16,
"min": 6,
"max": 80,
"step": 1,
"group": "Body",
"label": "Outer diameter (mm)"
},
"length": {
"type": "float",
"default": 8,
"min": 2.4,
"max": 24,
"step": 1,
"group": "Body",
"label": "Length (mm)"
},
"i... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329557 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"outer_d": {"type": 'float', "default": 7.16, "min": 6.0, "max": 80.0, "step": 1.0, "group": 'Body', "label": 'Outer diameter (mm)'},
"length": {"type": 'float', "default":... |
block_462c9f96_0994 | block | 1 | 1,177,329,558 | mirror_x | 2 | a2c6206d3eee803e | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 90700,
"surface_area": 18200,
"principal_moments": [
24099999.999999996,
40300000,
40700000
],
"n_faces": 15,
"n_edges": 39,
"n_vertices": 26
} | {
"lines": [
"Rectangular body, 40 × 38.8 × 61.3 mm (W×D×H).",
"Nine Ø3.2 mm holes in two staggered rows, 7.5 × 8.7 mm pitch."
],
"text": "Rectangular body, 40 × 38.8 × 61.3 mm (W×D×H). Nine Ø3.2 mm holes in two staggered rows, 7.5 × 8.7 mm pitch."
} | {
"block_w": {
"type": "float",
"default": 40,
"min": 15,
"max": 100,
"step": 1,
"group": "Body",
"label": "Block width (mm)"
},
"block_d": {
"type": "float",
"default": 38.8,
"min": 6,
"max": 100,
"step": 1,
"group": "Body",
"label": "Block depth (mm)"
},... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329558 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"block_w": {"type": 'float', "default": 40, "min": 15.0, "max": 100.0, "step": 1.0, "group": 'Body', "label": 'Block width (mm)'},
"block_d": {"type": 'float', "default": 3... |
block_462c9f97_0995 | block | 2 | 1,177,329,559 | none | 3 | df6038f955c1a8be | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 118000,
"surface_area": 21200,
"principal_moments": [
33299999.999999996,
67600000,
72600000
],
"n_faces": 14,
"n_edges": 36,
"n_vertices": 24
} | {
"lines": [
"Rectangular body, 45 × 38.7 × 73.6 mm (W×D×H).",
"Four Ø6.4 mm holes at the corners, 31.5 × 27.09 mm spacing.",
"Fillet radius 1.92 mm on vertical edges."
],
"text": "Rectangular body, 45 × 38.7 × 73.6 mm (W×D×H). Four Ø6.4 mm holes at the corners, 31.5 × 27.09 mm spacing. Fillet radius ... | {
"block_w": {
"type": "float",
"default": 45,
"min": 15,
"max": 100,
"step": 1,
"group": "Body",
"label": "Block width (mm)"
},
"block_d": {
"type": "float",
"default": 38.7,
"min": 6,
"max": 100,
"step": 1,
"group": "Body",
"label": "Block depth (mm)"
},... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329559 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"block_w": {"type": 'float', "default": 45, "min": 15.0, "max": 100.0, "step": 1.0, "group": 'Body', "label": 'Block width (mm)'},
"block_d": {"type": 'float', "default": 3... |
profiled_462c9f98_0996 | profiled | 0 | 1,177,329,560 | none | 1 | fe087331d9678f83 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 156000,
"surface_area": 23900,
"principal_moments": [
15999999.999999998,
813000000,
816000000
],
"n_faces": 9,
"n_edges": 21,
"n_vertices": 14
} | {
"lines": [
"freeform sketched section (7 segments: 3 straight, 2 arcs, 2 curves), ~32.014 × 26.848 mm, extruded 248.8 mm thick."
],
"text": "freeform sketched section (7 segments: 3 straight, 2 arcs, 2 curves), ~32.014 × 26.848 mm, extruded 248.8 mm thick."
} | {
"sk_w": {
"type": "float",
"default": 37.94,
"min": 19,
"max": 68.3,
"step": 1,
"group": "Sketch",
"label": "Sketch width (mm)"
},
"sk_h": {
"type": "float",
"default": 32.41,
"min": 16.2,
"max": 58.3,
"step": 1,
"group": "Sketch",
"label": "Sketch height ... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329560 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"sk_w": {"type": 'float', "default": 37.94, "min": 19.0, "max": 68.3, "step": 1.0, "group": 'Sketch', "label": 'Sketch width (mm)'},
"sk_h": {"type": 'float', "default": 32... |
revolved_462c9f99_0997 | revolved | 1 | 1,177,329,561 | mirror_x | 2 | c9c0b1c5031cad7f | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 17800,
"surface_area": 5250,
"principal_moments": [
2940000,
2940000,
5340000
],
"n_faces": 8,
"n_edges": 14,
"n_vertices": 8
} | {
"lines": [
"Revolved body, Ø45.2 mm × 13.5 mm tall with Ø18.9 mm bore.",
"Chamfer 0.5 mm on the >Z or <Z edges."
],
"text": "Revolved body, Ø45.2 mm × 13.5 mm tall with Ø18.9 mm bore. Chamfer 0.5 mm on the >Z or <Z edges."
} | {
"outer_d": {
"type": "float",
"default": 45.2,
"min": 6,
"max": 80,
"step": 1,
"group": "Body",
"label": "Outer diameter (mm)"
},
"length": {
"type": "float",
"default": 13.5,
"min": 4,
"max": 40.5,
"step": 1,
"group": "Body",
"label": "Length (mm)"
},
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329561 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"outer_d": {"type": 'float', "default": 45.2, "min": 6.0, "max": 80.0, "step": 1.0, "group": 'Body', "label": 'Outer diameter (mm)'},
"length": {"type": 'float', "default":... |
swept_462c9f9a_0998 | swept | 2 | 1,177,329,562 | mirror_xy | 1 | b6fe5fb2fd6077b6 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 663,
"surface_area": 2720,
"principal_moments": [
13700,
296000,
297000
],
"n_faces": 3,
"n_edges": 3,
"n_vertices": 2
} | {
"lines": [
"Ø12.6 mm circular section swept along a curved path, ~61.93 mm span."
],
"text": "Ø12.6 mm circular section swept along a curved path, ~61.93 mm span."
} | {
"path_w": {
"type": "float",
"default": 61.93,
"min": 31,
"max": 111.5,
"step": 1,
"group": "Path",
"label": "Path width (mm)"
},
"path_h": {
"type": "float",
"default": 57.61,
"min": 28.8,
"max": 103.7,
"step": 1,
"group": "Path",
"label": "Path length (m... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329562 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"path_w": {"type": 'float', "default": 61.93, "min": 31.0, "max": 111.5, "step": 1.0, "group": 'Path', "label": 'Path width (mm)'},
"path_h": {"type": 'float', "default": 5... |
ribbed_462c9f9b_0999 | ribbed | 3 | 1,177,329,563 | none | 2 | 456287601d4256f7 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 17300,
"surface_area": 9010,
"principal_moments": [
2930000,
8680000,
10900000
],
"n_faces": 22,
"n_edges": 52,
"n_vertices": 32
} | {
"lines": [
"Rectangular body, 67.2 × 36 × 5 mm (W×D×H).",
"Two ribs, 3.9 mm thick, 12.4 mm tall."
],
"text": "Rectangular body, 67.2 × 36 × 5 mm (W×D×H). Two ribs, 3.9 mm thick, 12.4 mm tall."
} | {
"base_w": {
"type": "float",
"default": 67.2,
"min": 20,
"max": 120,
"step": 1,
"group": "Base",
"label": "Base width (mm)"
},
"base_d": {
"type": "float",
"default": 36,
"min": 15,
"max": 120,
"step": 1,
"group": "Base",
"label": "Base depth (mm)"
},
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329563 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_w": {"type": 'float', "default": 67.2, "min": 20.0, "max": 120.0, "step": 1.0, "group": 'Base', "label": 'Base width (mm)'},
"base_d": {"type": 'float', "default": 36... |
compound_462c9f9c_1000 | compound | 1 | 1,177,329,564 | none | 2 | 811f0483f1ba0d82 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 45000,
"surface_area": 8140,
"principal_moments": [
7860000,
13499999.999999998,
13499999.999999998
],
"n_faces": 16,
"n_edges": 39,
"n_vertices": 26
} | {
"lines": [
"Lofted body through 2 sections: 41.77 × 41.77 mm rectangular section → Ø20.1 mm circular section.",
"8-sided polygon section, 16 mm across corners attachment, 16.2 mm long, from top face."
],
"text": "Lofted body through 2 sections: 41.77 × 41.77 mm rectangular section → Ø20.1 mm circular se... | {
"adapter_base": {
"type": "float",
"default": 41.77,
"min": 25.1,
"max": 62.7,
"step": 1,
"group": "Body",
"label": "Base size (mm)"
},
"adapter_top": {
"type": "float",
"default": 20.1,
"min": 10.1,
"max": 41.8,
"step": 1,
"group": "Body",
"label": "Top s... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329564 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"adapter_base": {"type": 'float', "default": 41.77, "min": 25.1, "max": 62.7, "step": 1.0, "group": 'Body', "label": 'Base size (mm)'},
"adapter_top": {"type": 'float', "de... |
block_462c9f9d_1001 | block | 3 | 1,177,329,565 | none | 4 | 20fd842c1e7c2dcc | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 128000,
"surface_area": 24000,
"principal_moments": [
39100000,
94899999.99999999,
118000000
],
"n_faces": 13,
"n_edges": 30,
"n_vertices": 20
} | {
"lines": [
"Rectangular body, 55 × 27.3 × 87.6 mm (W×D×H).",
"Four Ø4.3 mm holes at the corners, 38.5 × 19.11 mm spacing.",
"Boss Ø18.4 mm × 11.7 mm tall on top face with a Ø4.3 mm bore.",
"Fillet radius 2.748 mm on vertical edges (optional, off by default)."
],
"text": "Rectangular body, 55 × 2... | {
"block_w": {
"type": "float",
"default": 55,
"min": 15,
"max": 100,
"step": 1,
"group": "Body",
"label": "Block width (mm)"
},
"block_d": {
"type": "float",
"default": 27.3,
"min": 6,
"max": 100,
"step": 1,
"group": "Body",
"label": "Block depth (mm)"
},... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329565 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"block_w": {"type": 'float', "default": 55, "min": 15.0, "max": 100.0, "step": 1.0, "group": 'Body', "label": 'Block width (mm)'},
"block_d": {"type": 'float', "default": 2... |
bracket_462c9f9e_1002 | bracket | 2 | 1,177,329,566 | none | 1 | c546b0276632ac4c | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 21400,
"surface_area": 10100,
"principal_moments": [
3530000,
12399999.999999998,
14499999.999999998
],
"n_faces": 18,
"n_edges": 48,
"n_vertices": 32
} | {
"lines": [
"Z-bracket: base leg 45 mm, vertical leg 28 mm, top leg 44.6 mm, 39.76 mm wide, 5 mm thick; 1 × Ø5.3 mm hole per leg; 6.2 mm corner gusset."
],
"text": "Z-bracket: base leg 45 mm, vertical leg 28 mm, top leg 44.6 mm, 39.76 mm wide, 5 mm thick; 1 × Ø5.3 mm hole per leg; 6.2 mm corner gusset."
} | {
"base_len": {
"type": "float",
"default": 45,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Base leg length (mm)"
},
"vert_len": {
"type": "float",
"default": 28,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Vertical leg length... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329566 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_len": {"type": 'float', "default": 45, "min": 25.0, "max": 90.0, "step": 1.0, "group": 'Body', "label": 'Base leg length (mm)'},
"vert_len": {"type": 'float', "defaul... |
threaded_462c9f9f_1003 | threaded | 0 | 1,177,329,567 | none | 1 | b4ddc6028da665d5 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 6330,
"surface_area": 3060,
"principal_moments": [
175000,
802000,
802000
],
"n_faces": 326,
"n_edges": 892,
"n_vertices": 568
} | {
"lines": [
"M16x2 external thread, 37 mm long."
],
"text": "M16x2 external thread, 37 mm long."
} | {
"major_d": {
"type": "float",
"default": 16,
"min": 4,
"max": 24,
"step": 0.5,
"group": "Thread",
"label": "Major diameter (mm)"
},
"pitch": {
"type": "float",
"default": 2,
"min": 1,
"max": 4,
"step": 0.05,
"group": "Thread",
"label": "Pitch (mm)"
},
... | import cadquery as cq
from bd_warehouse import thread as _bdt
import build123d as _bd
# Generated by CadQuarry v0.6.0 — seed 1177329567 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"major_d": {"type": 'float', "default": 16.0, "min": 4.0, "max": 24.0, "step": 0.5, "group": 'Thread', "label": ... |
block_462c9fa0_1004 | block | 1 | 1,177,329,568 | none | 2 | 7c51e3a60d621a29 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 420000,
"surface_area": 41200,
"principal_moments": [
380000000,
421000000,
659000000
],
"n_faces": 11,
"n_edges": 27,
"n_vertices": 18
} | {
"lines": [
"Rectangular body, 93.96 × 45.1 × 100 mm (W×D×H).",
"Five Ø3.2 mm holes in two staggered rows, 35.2 × 29 mm pitch."
],
"text": "Rectangular body, 93.96 × 45.1 × 100 mm (W×D×H). Five Ø3.2 mm holes in two staggered rows, 35.2 × 29 mm pitch."
} | {
"block_w": {
"type": "float",
"default": 93.96,
"min": 15,
"max": 100,
"step": 1,
"group": "Body",
"label": "Block width (mm)"
},
"block_d": {
"type": "float",
"default": 45.1,
"min": 6,
"max": 100,
"step": 1,
"group": "Body",
"label": "Block depth (mm)"
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329568 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"block_w": {"type": 'float', "default": 93.96, "min": 15.0, "max": 100.0, "step": 1.0, "group": 'Body', "label": 'Block width (mm)'},
"block_d": {"type": 'float', "default"... |
plate_462c9fa1_1005 | plate | 2 | 1,177,329,569 | none | 2 | c30a50db70dbe0f7 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 40100,
"surface_area": 10800,
"principal_moments": [
4810000,
30199999.999999996,
34000000
],
"n_faces": 18,
"n_edges": 36,
"n_vertices": 24
} | {
"lines": [
"Rectangular body, 95 × 36.3 × 12 mm (W×D×H).",
"Four Ø4.3 mm counterbored holes (Ø8.6 mm × 3.4 mm counterbore) at the corners, 66.5 × 25.41 mm spacing."
],
"text": "Rectangular body, 95 × 36.3 × 12 mm (W×D×H). Four Ø4.3 mm counterbored holes (Ø8.6 mm × 3.4 mm counterbore) at the corners, 66.... | {
"plate_w": {
"type": "float",
"default": 95,
"min": 20,
"max": 120,
"step": 1,
"group": "Body",
"label": "Plate width (mm)"
},
"plate_d": {
"type": "float",
"default": 36.3,
"min": 8,
"max": 120,
"step": 1,
"group": "Body",
"label": "Plate depth (mm)"
},... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329569 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"plate_w": {"type": 'float', "default": 95, "min": 20.0, "max": 120.0, "step": 1.0, "group": 'Body', "label": 'Plate width (mm)'},
"plate_d": {"type": 'float', "default": 3... |
ribbed_462c9fa2_1006 | ribbed | 1 | 1,177,329,570 | mirror_x | 2 | ed6f7be7a3342eea | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 9000,
"surface_area": 6870,
"principal_moments": [
1190000,
3090000,
4140000
],
"n_faces": 30,
"n_edges": 72,
"n_vertices": 44
} | {
"lines": [
"Rectangular body, 60.47 × 31.7 × 3 mm (W×D×H).",
"Three ribs, 3.2 mm thick, 7 mm tall."
],
"text": "Rectangular body, 60.47 × 31.7 × 3 mm (W×D×H). Three ribs, 3.2 mm thick, 7 mm tall."
} | {
"base_w": {
"type": "float",
"default": 60.47,
"min": 20,
"max": 120,
"step": 1,
"group": "Base",
"label": "Base width (mm)"
},
"base_d": {
"type": "float",
"default": 31.7,
"min": 15,
"max": 120,
"step": 1,
"group": "Base",
"label": "Base depth (mm)"
},... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329570 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_w": {"type": 'float', "default": 60.47, "min": 20.0, "max": 120.0, "step": 1.0, "group": 'Base', "label": 'Base width (mm)'},
"base_d": {"type": 'float', "default": 3... |
plate_462c9fa3_1007 | plate | 2 | 1,177,329,571 | mirror_x | 3 | 2a11008de49952f0 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 84900,
"surface_area": 21400,
"principal_moments": [
52999999.99999999,
70100000,
122000000
],
"n_faces": 14,
"n_edges": 36,
"n_vertices": 24
} | {
"lines": [
"Rectangular body, 100 × 86.8 × 10 mm (W×D×H).",
"Four Ø6.4 mm holes at the corners, 70 × 60.76 mm spacing.",
"Chamfer 5.4 mm on vertical edges."
],
"text": "Rectangular body, 100 × 86.8 × 10 mm (W×D×H). Four Ø6.4 mm holes at the corners, 70 × 60.76 mm spacing. Chamfer 5.4 mm on vertical ... | {
"plate_w": {
"type": "float",
"default": 100,
"min": 20,
"max": 120,
"step": 1,
"group": "Body",
"label": "Plate width (mm)"
},
"plate_d": {
"type": "float",
"default": 86.8,
"min": 8,
"max": 120,
"step": 1,
"group": "Body",
"label": "Plate depth (mm)"
}... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329571 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"plate_w": {"type": 'float', "default": 100, "min": 20.0, "max": 120.0, "step": 1.0, "group": 'Body', "label": 'Plate width (mm)'},
"plate_d": {"type": 'float', "default": ... |
ribbed_462c9fa4_1008 | ribbed | 3 | 1,177,329,572 | mirror_xy | 2 | 540b6bf236088bb6 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 32800,
"surface_area": 19700,
"principal_moments": [
14399999.999999998,
19600000,
32799999.999999996
],
"n_faces": 26,
"n_edges": 60,
"n_vertices": 40
} | {
"lines": [
"Rectangular body, 82.06 × 74.9 × 3 mm (W×D×H).",
"Four ribs, 4.8 mm thick, 11.4 mm tall."
],
"text": "Rectangular body, 82.06 × 74.9 × 3 mm (W×D×H). Four ribs, 4.8 mm thick, 11.4 mm tall."
} | {
"base_w": {
"type": "float",
"default": 82.06,
"min": 20,
"max": 120,
"step": 1,
"group": "Base",
"label": "Base width (mm)"
},
"base_d": {
"type": "float",
"default": 74.9,
"min": 15,
"max": 120,
"step": 1,
"group": "Base",
"label": "Base depth (mm)"
},... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329572 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_w": {"type": 'float', "default": 82.06, "min": 20.0, "max": 120.0, "step": 1.0, "group": 'Base', "label": 'Base width (mm)'},
"base_d": {"type": 'float', "default": 7... |
compound_462c9fa5_1009 | compound | 1 | 1,177,329,573 | mirror_xy | 2 | c6747c4fb7f159fc | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 87000,
"surface_area": 15500,
"principal_moments": [
25399999.999999996,
36100000,
40000000
],
"n_faces": 9,
"n_edges": 18,
"n_vertices": 12
} | {
"lines": [
"Rectangular body, 59.62 × 36.8 × 38.8 mm (W×D×H).",
"Ø17.5 mm circular section attachment, 29.8 mm long, from back face with a Ø10.1 mm bore."
],
"text": "Rectangular body, 59.62 × 36.8 × 38.8 mm (W×D×H). Ø17.5 mm circular section attachment, 29.8 mm long, from back face with a Ø10.1 mm bore... | {
"block_w": {
"type": "float",
"default": 59.62,
"min": 15,
"max": 100,
"step": 1,
"group": "Body",
"label": "Block width (mm)"
},
"block_d": {
"type": "float",
"default": 36.8,
"min": 10,
"max": 100,
"step": 1,
"group": "Body",
"label": "Block depth (mm)"
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329573 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"block_w": {"type": 'float', "default": 59.62, "min": 15.0, "max": 100.0, "step": 1.0, "group": 'Body', "label": 'Block width (mm)'},
"block_d": {"type": 'float', "default"... |
ribbed_462c9fa6_1010 | ribbed | 2 | 1,177,329,574 | mirror_x | 3 | 0616e6517e30073c | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 24500,
"surface_area": 15600,
"principal_moments": [
6580000,
9050000,
14399999.999999998
],
"n_faces": 39,
"n_edges": 108,
"n_vertices": 72
} | {
"lines": [
"Rectangular body, 65 × 56.6 × 3 mm (W×D×H).",
"Five ribs, 3.9 mm thick, 13.4 mm tall.",
"Four Ø3.2 mm holes at the corners, 45.5 × 39.62 mm spacing."
],
"text": "Rectangular body, 65 × 56.6 × 3 mm (W×D×H). Five ribs, 3.9 mm thick, 13.4 mm tall. Four Ø3.2 mm holes at the corners, 45.5 × 3... | {
"base_w": {
"type": "float",
"default": 65,
"min": 20,
"max": 120,
"step": 1,
"group": "Base",
"label": "Base width (mm)"
},
"base_d": {
"type": "float",
"default": 56.6,
"min": 15,
"max": 120,
"step": 1,
"group": "Base",
"label": "Base depth (mm)"
},
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329574 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_w": {"type": 'float', "default": 65, "min": 20.0, "max": 120.0, "step": 1.0, "group": 'Base', "label": 'Base width (mm)'},
"base_d": {"type": 'float', "default": 56.6... |
lofted_462c9fa7_1011 | lofted | 0 | 1,177,329,575 | mirror_xy | 1 | 5f63e26b16bdbe9f | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 29500,
"surface_area": 5610,
"principal_moments": [
4820000,
4830000,
4830000
],
"n_faces": 8,
"n_edges": 18,
"n_vertices": 12
} | {
"lines": [
"Lofted body through 2 sections: Ø44.91 mm circular section → 6-sided polygon section, 22.2 mm across corners."
],
"text": "Lofted body through 2 sections: Ø44.91 mm circular section → 6-sided polygon section, 22.2 mm across corners."
} | {
"loft_base": {
"type": "float",
"default": 44.91,
"min": 22.5,
"max": 71.9,
"step": 1,
"group": "Body",
"label": "Base size (mm)"
},
"loft_top": {
"type": "float",
"default": 22.2,
"min": 8.9,
"max": 53.9,
"step": 1,
"group": "Body",
"label": "Top size (mm... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329575 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"loft_base": {"type": 'float', "default": 44.91, "min": 22.5, "max": 71.9, "step": 1.0, "group": 'Body', "label": 'Base size (mm)'},
"loft_top": {"type": 'float', "default"... |
bracket_462c9fa9_1013 | bracket | 2 | 1,177,329,577 | mirror_x | 1 | fcaf4c20a0e6e3d9 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 13400,
"surface_area": 9650,
"principal_moments": [
3160000,
6090000,
7290000
],
"n_faces": 14,
"n_edges": 37,
"n_vertices": 24
} | {
"lines": [
"L-bracket: base leg 56.75 mm, vertical leg 39.7 mm, 45.34 mm wide, 3 mm thick; 1 × Ø3.2 mm hole per leg; 4.3 mm corner gusset."
],
"text": "L-bracket: base leg 56.75 mm, vertical leg 39.7 mm, 45.34 mm wide, 3 mm thick; 1 × Ø3.2 mm hole per leg; 4.3 mm corner gusset."
} | {
"base_len": {
"type": "float",
"default": 56.75,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Base leg length (mm)"
},
"vert_len": {
"type": "float",
"default": 39.7,
"min": 25,
"max": 90,
"step": 1,
"group": "Body",
"label": "Vertical leg l... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329577 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_len": {"type": 'float', "default": 56.75, "min": 25.0, "max": 90.0, "step": 1.0, "group": 'Body', "label": 'Base leg length (mm)'},
"vert_len": {"type": 'float', "def... |
plate_462c9faa_1014 | plate | 3 | 1,177,329,578 | none | 4 | a07a423199697f4b | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 14100,
"surface_area": 6800,
"principal_moments": [
1370000,
6170000,
7400000
],
"n_faces": 47,
"n_edges": 132,
"n_vertices": 88
} | {
"lines": [
"Rectangular body, 68.27 × 32 × 8 mm (W×D×H).",
"Four 5.2 mm square holes at the corners, 47.789 × 22.4 mm spacing.",
"Chamfer 0.6 mm on vertical edges.",
"Pocket 30.7 × 19.8 mm, 4.2 mm deep, in top face."
],
"text": "Rectangular body, 68.27 × 32 × 8 mm (W×D×H). Four 5.2 mm square hol... | {
"plate_w": {
"type": "float",
"default": 68.27,
"min": 20,
"max": 120,
"step": 1,
"group": "Body",
"label": "Plate width (mm)"
},
"plate_d": {
"type": "float",
"default": 32,
"min": 8,
"max": 120,
"step": 1,
"group": "Body",
"label": "Plate depth (mm)"
}... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329578 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"plate_w": {"type": 'float', "default": 68.27, "min": 20.0, "max": 120.0, "step": 1.0, "group": 'Body', "label": 'Plate width (mm)'},
"plate_d": {"type": 'float', "default"... |
enclosure_462c9fab_1015 | enclosure | 3 | 1,177,329,579 | mirror_xy | 4 | 91e665c36e66b7c4 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 19400,
"surface_area": 14400,
"principal_moments": [
4590000,
10600000,
11499999.999999998
],
"n_faces": 35,
"n_edges": 108,
"n_vertices": 72
} | {
"lines": [
"Rectangular body, 63.16 × 31.8 × 30.7 mm (W×D×H).",
"Hollowed to 2.8 mm wall thickness, open at top face.",
"Four Ø4.3 mm holes at the corners, 44.212 × 22.26 mm spacing.",
"Fillet radius 1.432 mm on vertical edges."
],
"text": "Rectangular body, 63.16 × 31.8 × 30.7 mm (W×D×H). Hollo... | {
"enc_w": {
"type": "float",
"default": 63.16,
"min": 30,
"max": 120,
"step": 1,
"group": "Body",
"label": "Enclosure width (mm)"
},
"enc_d": {
"type": "float",
"default": 31.8,
"min": 12,
"max": 120,
"step": 1,
"group": "Body",
"label": "Enclosure depth (m... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329579 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"enc_w": {"type": 'float', "default": 63.16, "min": 30.0, "max": 120.0, "step": 1.0, "group": 'Body', "label": 'Enclosure width (mm)'},
"enc_d": {"type": 'float', "default"... |
block_462c9fac_1016 | block | 2 | 1,177,329,580 | mirror_x | 3 | df0b52d348bb6d68 | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 30000,
"surface_area": 9890,
"principal_moments": [
3770000,
8260000,
8940000
],
"n_faces": 15,
"n_edges": 48,
"n_vertices": 32
} | {
"lines": [
"Rectangular body, 50.46 × 24 × 31.7 mm (W×D×H).",
"Four Ø5.3 mm holes at the corners, 35.322 × 16.8 mm spacing.",
"Pocket 34.9 × 14.6 mm, 11.2 mm deep, in top face."
],
"text": "Rectangular body, 50.46 × 24 × 31.7 mm (W×D×H). Four Ø5.3 mm holes at the corners, 35.322 × 16.8 mm spacing. P... | {
"block_w": {
"type": "float",
"default": 50.46,
"min": 15,
"max": 100,
"step": 1,
"group": "Body",
"label": "Block width (mm)"
},
"block_d": {
"type": "float",
"default": 24,
"min": 6,
"max": 100,
"step": 1,
"group": "Body",
"label": "Block depth (mm)"
}... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329580 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"block_w": {"type": 'float', "default": 50.46, "min": 15.0, "max": 100.0, "step": 1.0, "group": 'Body', "label": 'Block width (mm)'},
"block_d": {"type": 'float', "default"... |
compound_462c9fad_1017 | compound | 2 | 1,177,329,581 | mirror_xy | 3 | 5b430e5cda1af61d | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 9990,
"surface_area": 3680,
"principal_moments": [
793000,
852000,
1020000
],
"n_faces": 15,
"n_edges": 36,
"n_vertices": 24
} | {
"lines": [
"Rectangular body, 25 × 15 × 26.2 mm (W×D×H).",
"6-sided polygon section, 8 mm across corners attachment, 14.2 mm long, from back face.",
"Four Ø3.2 mm holes at the corners, 17.5 × 10.5 mm spacing."
],
"text": "Rectangular body, 25 × 15 × 26.2 mm (W×D×H). 6-sided polygon section, 8 mm acr... | {
"block_w": {
"type": "float",
"default": 25,
"min": 15,
"max": 100,
"step": 1,
"group": "Body",
"label": "Block width (mm)"
},
"block_d": {
"type": "float",
"default": 15,
"min": 10,
"max": 100,
"step": 1,
"group": "Body",
"label": "Block depth (mm)"
},
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329581 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"block_w": {"type": 'float', "default": 25, "min": 15.0, "max": 100.0, "step": 1.0, "group": 'Body', "label": 'Block width (mm)'},
"block_d": {"type": 'float', "default": 1... |
flanged_462c9fae_1018 | flanged | 2 | 1,177,329,582 | none | 3 | 4e71fa1e06109dfe | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 523000,
"surface_area": 73300,
"principal_moments": [
871000000,
871000000,
1130000000
],
"n_faces": 22,
"n_edges": 47,
"n_vertices": 28
} | {
"lines": [
"Revolved body, Ø85 mm × 77.8 mm tall with Ø39.3 mm bore, Ø163.4 mm × 11.8 mm flange.",
"Six Ø8.4 mm holes on a Ø98 mm bolt circle.",
"Chamfer 1 mm on the >Z or <Z edges."
],
"text": "Revolved body, Ø85 mm × 77.8 mm tall with Ø39.3 mm bore, Ø163.4 mm × 11.8 mm flange. Six Ø8.4 mm holes on... | {
"outer_d": {
"type": "float",
"default": 85,
"min": 20,
"max": 100,
"step": 1,
"group": "Body",
"label": "Outer diameter (mm)"
},
"length": {
"type": "float",
"default": 77.8,
"min": 23.3,
"max": 194.5,
"step": 1,
"group": "Body",
"label": "Length (mm)"
... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329582 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"outer_d": {"type": 'float', "default": 85, "min": 20.0, "max": 100.0, "step": 1.0, "group": 'Body', "label": 'Outer diameter (mm)'},
"length": {"type": 'float', "default":... |
plate_462c9faf_1019 | plate | 1 | 1,177,329,583 | mirror_xy | 2 | c0e896bd5db6e84f | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 78800,
"surface_area": 17600,
"principal_moments": [
32599999.999999996,
60099999.99999999,
90800000
],
"n_faces": 10,
"n_edges": 24,
"n_vertices": 16
} | {
"lines": [
"Rectangular body, 95 × 69.5 × 12 mm (W×D×H).",
"Four Ø3.2 mm holes at the corners, 66.5 × 48.65 mm spacing."
],
"text": "Rectangular body, 95 × 69.5 × 12 mm (W×D×H). Four Ø3.2 mm holes at the corners, 66.5 × 48.65 mm spacing."
} | {
"plate_w": {
"type": "float",
"default": 95,
"min": 20,
"max": 120,
"step": 1,
"group": "Body",
"label": "Plate width (mm)"
},
"plate_d": {
"type": "float",
"default": 69.5,
"min": 8,
"max": 120,
"step": 1,
"group": "Body",
"label": "Plate depth (mm)"
},... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329583 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"plate_w": {"type": 'float', "default": 95, "min": 20.0, "max": 120.0, "step": 1.0, "group": 'Body', "label": 'Plate width (mm)'},
"plate_d": {"type": 'float', "default": 6... |
compound_462c9fb0_1020 | compound | 1 | 1,177,329,584 | mirror_xy | 3 | 2b2b66961b8d27ea | 0.6.0 | CC0-1.0 | {
"version": 2,
"volume": 128000,
"surface_area": 34500,
"principal_moments": [
124000000,
145000000,
177000000
],
"n_faces": 13,
"n_edges": 30,
"n_vertices": 20
} | {
"lines": [
"Rectangular body, 95.63 × 107.9 × 10 mm (W×D×H).",
"Ø27.5 mm circular section attachment, 68.2 mm long, from top face with a Ø14.6 mm bore.",
"Four Ø8.4 mm holes at the corners, 66.941 × 75.53 mm spacing."
],
"text": "Rectangular body, 95.63 × 107.9 × 10 mm (W×D×H). Ø27.5 mm circular sec... | {
"base_w": {
"type": "float",
"default": 95.63,
"min": 30,
"max": 160,
"step": 1,
"group": "Base",
"label": "Base width (mm)"
},
"base_d": {
"type": "float",
"default": 107.9,
"min": 25,
"max": 160,
"step": 1,
"group": "Base",
"label": "Base depth (mm)"
}... | import cadquery as cq
# Generated by CadQuarry v0.6.0 — seed 1177329584 — CC0-1.0
# https://github.com/jacobjennings/CadQuarry
PARAMS = {
"base_w": {"type": 'float', "default": 95.63, "min": 30.0, "max": 160.0, "step": 1.0, "group": 'Base', "label": 'Base width (mm)'},
"base_d": {"type": 'float', "default": 1... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.