{
  "region_annotations": [
    {
      "name": "entryway",
      "label": "entryway/foyer/lobby",
      "poly_loop": [
        [
          -0.09607,
          0.0,
          -0.1066
        ],
        [
          -2.93062,
          0.0,
          -0.1066
        ],
        [
          -2.93062,
          0.0,
          -7.10197
        ],
        [
          -0.09607,
          0.0,
          -7.10197
        ]
      ],
      "floor_height": 0.0,
      "extrusion_height": 2.8,
      "min_bounds": [
        -2.93062,
        0.0,
        -7.10197
      ],
      "max_bounds": [
        -0.09607,
        2.8,
        -0.1066
      ]
    },
    {
      "name": "hallway",
      "label": "hallway",
      "poly_loop": [
        [
          5.16265,
          0.0,
          -0.62209
        ],
        [
          0.05393,
          0.0,
          -0.62209
        ],
        [
          0.05393,
          0.0,
          -2.13826
        ],
        [
          5.16265,
          0.0,
          -2.13826
        ]
      ],
      "floor_height": 0.0,
      "extrusion_height": 2.8,
      "min_bounds": [
        0.05393,
        0.0,
        -2.13826
      ],
      "max_bounds": [
        5.16265,
        2.8,
        -0.62209
      ]
    },
    {
      "name": "closet",
      "label": "closet",
      "poly_loop": [
        [
          1.6448,
          0.0,
          13.49426
        ],
        [
          0.0254,
          0.0,
          13.49426
        ],
        [
          0.0254,
          0.0,
          11.50605
        ],
        [
          1.6448,
          0.0,
          11.50605
        ]
      ],
      "floor_height": 0.0,
      "extrusion_height": 2.8,
      "min_bounds": [
        0.0254,
        0.0,
        11.50605
      ],
      "max_bounds": [
        1.6448,
        2.8,
        13.49426
      ]
    },
    {
      "name": "closet.001",
      "label": "closet",
      "poly_loop": [
        [
          -0.1246,
          0.0,
          13.49426
        ],
        [
          -1.78514,
          0.0,
          13.49426
        ],
        [
          -1.78514,
          0.0,
          11.50605
        ],
        [
          -0.1246,
          0.0,
          11.50605
        ]
      ],
      "floor_height": 0.0,
      "extrusion_height": 2.8,
      "min_bounds": [
        -1.78514,
        0.0,
        11.50605
      ],
      "max_bounds": [
        -0.1246,
        2.8,
        13.49426
      ]
    },
    {
      "name": "dining room",
      "label": "dining room",
      "poly_loop": [
        [
          -0.09607,
          0.0,
          4.76856
        ],
        [
          -2.00794,
          0.0,
          4.76856
        ],
        [
          -2.00794,
          0.0,
          2.20194
        ],
        [
          -6.84113,
          0.0,
          2.20194
        ],
        [
          -6.84113,
          0.0,
          4.76856
        ],
        [
          -10.36933,
          0.0,
          4.76856
        ],
        [
          -10.36933,
          0.0,
          0.0434
        ],
        [
          -0.09607,
          0.0,
          0.0434
        ]
      ],
      "floor_height": 0.0,
      "extrusion_height": 2.8,
      "min_bounds": [
        -10.36933,
        0.0,
        0.0434
      ],
      "max_bounds": [
        -0.09607,
        2.8,
        4.76856
      ]
    },
    {
      "name": "laundryroom",
      "label": "laundryroom/mudroom",
      "poly_loop": [
        [
          -0.09607,
          0.0,
          6.78419
        ],
        [
          -2.00794,
          0.0,
          6.78419
        ],
        [
          -2.00794,
          0.0,
          4.91856
        ],
        [
          -0.09607,
          0.0,
          4.91856
        ]
      ],
      "floor_height": 0.0,
      "extrusion_height": 2.8,
      "min_bounds": [
        -2.00794,
        0.0,
        4.91856
      ],
      "max_bounds": [
        -0.09607,
        2.8,
        6.78419
      ]
    },
    {
      "name": "tv",
      "label": "tv",
      "poly_loop": [
        [
          -3.08062,
          0.0,
          -0.1066
        ],
        [
          -8.86461,
          0.0,
          -0.1066
        ],
        [
          -8.86461,
          0.0,
          -6.43483
        ],
        [
          -3.08062,
          0.0,
          -6.43483
        ]
      ],
      "floor_height": 0.0,
      "extrusion_height": 2.8,
      "min_bounds": [
        -8.86461,
        0.0,
        -6.43483
      ],
      "max_bounds": [
        -3.08062,
        2.8,
        -0.1066
      ]
    },
    {
      "name": "bedroom",
      "label": "bedroom",
      "poly_loop": [
        [
          4.56375,
          0.0,
          -2.28826
        ],
        [
          0.13753,
          0.0,
          -2.28826
        ],
        [
          0.13753,
          0.0,
          -7.10197
        ],
        [
          5.45442,
          0.0,
          -7.10197
        ],
        [
          5.45442,
          0.0,
          -4.29228
        ],
        [
          4.56375,
          0.0,
          -4.29228
        ]
      ],
      "floor_height": 0.0,
      "extrusion_height": 2.8,
      "min_bounds": [
        0.13753,
        0.0,
        -7.10197
      ],
      "max_bounds": [
        5.45442,
        2.8,
        -2.28826
      ]
    },
    {
      "name": "closet.002",
      "label": "closet",
      "poly_loop": [
        [
          5.45442,
          0.0,
          -2.28826
        ],
        [
          4.71375,
          0.0,
          -2.28826
        ],
        [
          4.71375,
          0.0,
          -4.14228
        ],
        [
          5.45442,
          0.0,
          -4.14228
        ]
      ],
      "floor_height": 0.0,
      "extrusion_height": 2.8,
      "min_bounds": [
        4.71375,
        0.0,
        -4.14228
      ],
      "max_bounds": [
        5.45442,
        2.8,
        -2.28826
      ]
    },
    {
      "name": "bedroom.001",
      "label": "bedroom",
      "poly_loop": [
        [
          9.36674,
          0.0,
          -0.05259
        ],
        [
          9.98183,
          0.0,
          -0.05259
        ],
        [
          9.98183,
          0.0,
          3.46995
        ],
        [
          3.62942,
          0.0,
          3.46995
        ],
        [
          3.62942,
          0.0,
          -0.47209
        ],
        [
          5.16265,
          0.0,
          -0.47209
        ],
        [
          5.16265,
          0.0,
          0.0434
        ],
        [
          9.36674,
          0.0,
          0.0434
        ]
      ],
      "floor_height": 0.0,
      "extrusion_height": 2.8,
      "min_bounds": [
        3.62942,
        0.0,
        -0.47209
      ],
      "max_bounds": [
        9.98183,
        2.8,
        3.46995
      ]
    },
    {
      "name": "bedroom.002",
      "label": "bedroom",
      "poly_loop": [
        [
          5.18937,
          0.0,
          7.20078
        ],
        [
          0.05393,
          0.0,
          7.20078
        ],
        [
          0.05393,
          0.0,
          -0.47209
        ],
        [
          3.47942,
          0.0,
          -0.47209
        ],
        [
          3.47942,
          0.0,
          3.61995
        ],
        [
          5.18937,
          0.0,
          3.61995
        ]
      ],
      "floor_height": 0.0,
      "extrusion_height": 2.8,
      "min_bounds": [
        0.05393,
        0.0,
        -0.47209
      ],
      "max_bounds": [
        5.18937,
        2.8,
        7.20078
      ]
    },
    {
      "name": "bathroom",
      "label": "bathroom",
      "poly_loop": [
        [
          9.21674,
          0.0,
          -0.1066
        ],
        [
          5.31265,
          0.0,
          -0.1066
        ],
        [
          5.31265,
          0.0,
          -2.13826
        ],
        [
          5.60442,
          0.0,
          -2.13826
        ],
        [
          5.60442,
          0.0,
          -2.96422
        ],
        [
          9.21674,
          0.0,
          -2.96422
        ]
      ],
      "floor_height": 0.0,
      "extrusion_height": 2.8,
      "min_bounds": [
        5.31265,
        0.0,
        -2.96422
      ],
      "max_bounds": [
        9.21674,
        2.8,
        -0.1066
      ]
    },
    {
      "name": "bathroom.001",
      "label": "bathroom",
      "poly_loop": [
        [
          2.58816,
          0.0,
          11.35605
        ],
        [
          -2.87162,
          0.0,
          11.35605
        ],
        [
          -2.87162,
          0.0,
          10.51176
        ],
        [
          -2.94662,
          0.0,
          10.36176
        ],
        [
          -2.96983,
          0.0,
          10.36176
        ],
        [
          -2.96983,
          0.0,
          7.03335
        ],
        [
          -0.09607,
          0.0,
          7.03335
        ],
        [
          -0.09607,
          0.0,
          7.35078
        ],
        [
          2.58816,
          0.0,
          7.35078
        ]
      ],
      "floor_height": 0.0,
      "extrusion_height": 2.8,
      "min_bounds": [
        -2.96983,
        0.0,
        7.03335
      ],
      "max_bounds": [
        2.58816,
        2.8,
        11.35605
      ]
    },
    {
      "name": "bathroom.002",
      "label": "bathroom",
      "poly_loop": [
        [
          -9.01461,
          0.0,
          -0.1066
        ],
        [
          -11.1033,
          0.0,
          -0.1066
        ],
        [
          -11.1033,
          0.0,
          -2.87904
        ],
        [
          -9.01461,
          0.0,
          -2.87904
        ]
      ],
      "floor_height": 0.0,
      "extrusion_height": 2.8,
      "min_bounds": [
        -11.1033,
        0.0,
        -2.87904
      ],
      "max_bounds": [
        -9.01461,
        2.8,
        -0.1066
      ]
    },
    {
      "name": "kitchen",
      "label": "kitchen",
      "poly_loop": [
        [
          -2.00794,
          0.0,
          4.76856
        ],
        [
          -6.84113,
          0.0,
          4.76856
        ],
        [
          -6.84113,
          0.0,
          2.20194
        ],
        [
          -2.00794,
          0.0,
          2.20194
        ]
      ],
      "floor_height": 0.0,
      "extrusion_height": 2.8,
      "min_bounds": [
        -6.84113,
        0.0,
        2.20194
      ],
      "max_bounds": [
        -2.00794,
        2.8,
        4.76856
      ]
    }
  ]
}