text:
0.635" width="0.127" layer="51"/>
<circle x="2.54" y="0" radius="0.635" width="0.127" layer="51"/>
<pad name="1" x="0" y="0" drill="0.889" diameter="0.8128" rot="R90"/>
<pad name="2" x="2.54" y="0" drill="0.889" diameter="0.8128" rot="R90"/>
<hole x="0" y="0" drill="1.4732"/>
<hole x="2.54" y="0" drill="1.4732"/>
<text x="-1.27" y="1.143" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
<text x="-1.27" y="-1.778" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text>
</package>
<package name="SCREWTERMINAL-3.5MM-2-NS">
<description>
Screw Terminal  3.5mm Pitch - 2 Pin PTH No Silk Outline

Specifications:

Pin count: 2

Pin pitch: 3.5mm/138mil

Datasheet referenced for footprint

Example device(s):

CONN_02

</description>
<wire x1="-1.75" y1="3.4" x2="5.25" y2="3.4" width="0.2032" layer="51"/>
<wire x1="5.25" y1="3.4" x2="5.25" y2="-2.8" width="0.2032" layer="51"/>
<wire x1="5.25" y1="-2.8" x2="5.25" y2="-3.6" width="0.2032" layer="51"/>
<wire x1="5.25" y1="-3.6" x2="-1.75" y2="-3.6" width="0.2032" layer="51"/>
<wire x1="-1.75" y1="-3.6" x2="-1.75" y2="-2.8" width="0.2032" layer="51"/>
<wire x1="-1.75" y1="-2.8" x2="-1.75" y2="3.4" width="0.2032" layer="51"/>
<wire x1="5.25" y1="-2.8" x2="-1.75" y2="-2.8" width="0.2032" layer="51"/>
<wire x1="-1.75" y1="-1.35" x2="-2.15" y2="-1.35" width="0.2032" layer="51"/>
<wire x1="-2.15" y1="-1.35" x2="-2.15" y2="-2.35" width="0.2032" layer="51"/>
<wire x1="-2.15" y1="-2.35" x2="-1.75" y2="-2.35" width="0.2032" layer="51"/>
<wire x1="5.25" y1="3.15" x2="5.65" y2="3.15" width="0.2032" layer="51"/>
<wire x1="5.65" y1="3.15" x2="5.65" y2="2.15" width="0.2032" layer="51"/>
<wire x1="5.65" y1="2.15" x2="5.25" y2="2.15" width="0.2032" layer="51"/>
<circle x="2" y="3" radius="0.2828" width="0.127" layer="51"/>
<pad name="1" x="0" y="0" drill="1.2" diameter="2.032" shape="square"/>
<pad name="2" x="3.5" y="0" drill="1.2" diameter="2.032"/>
<text x="-1.27" y="2.54" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
<text x="-1.27" y="1.27" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text>
</package>
<package name="JST-2-PTH-NS">
<description>
JST 2 Pin Right Angle Plated Through  Hole- No Silk

tDocu indicate polarity for connections that match SparkFun LiPo battery terminations.

 No silk outline of connector.

Specifications:

Pin count: 2

Pin pitch:2mm

Datasheet referenced for footprint

Example device(s):

CONN_02

</description>
<wire x1="-2" y1="0" x2="-2" y2="-1.8" width="0.2032" layer="51"/>
<wire x1="-2" y1="-1.8" x2="-3" y2="-1.8" width="0.2032" layer="51"/>
<wire x1="-3" y1="-1.8" x2="-3" y2="6" width="0.2032" layer="51"/>
<wire x1="-3" y1="6" x2="3" y2="6" width="0.2032" layer="51"/>
<wire x1="3" y1="6" x2="3" y2="-1.8" width="0.2032" layer="51"/>
<wire x1="3" y1="-1.8" x2="2" y2="-1.8" width="0.2032" layer="51"/>
<wire x1="2" y1="-1.8" x2="2" y2="0" width="0.2032" layer="51"/>
<pad name="1" x="-1" y="0" drill="0.7" diameter="1.6"/>
<pad name="2" x="1" y="0" drill="0.7" diameter="1.6"/>
<text x="-1.27" y="5.27" size="0.6096" layer="25" font="vector" ratio="20">>Name</text>
<text x="-1.27" y="4" size="0.6096" layer="27" font="vector" ratio="20">>Value</text>
<text x="0.6" y="0.7" size="1.27" layer="51">+</text>
<text x="-1.4" y="0.7" size="1.27" layer="51">-</text>
</package>
<package name="JST-2-PTH-KIT">
<description>
JST 2 Pin Right Angle Plated Through  Hole - KIT

tDocu indicate polarity for connections that match SparkFun LiPo battery terminations.

 This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad.

 This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.

Specifications:

Pin count: 2

Pin pitch:2mm

Datasheet referenced for footprint

Example device(s):

CONN_02

</description>
<wire x1="-2" y1="0" x2="-2" y2="-1.8" width="0.2032" layer="51"/>
<wire x1="-2" y1="-1.8" x2="-3" y2="-1.8" width="0.2032" layer="51"/>
<wire x1="-3" y1="-1.8" x2="-3" y2="6" width="0.2032" layer="51"/>
<wire x1="-3" y1="6" x2="3" y2="6" width="0.2032" layer="51"/>
<wire x1="3" y1="6" x2="3" y2="-1.8" width="0.2032" layer="51"/>
<wire x1="3" y1="-1.8" x2="2" y2="-1.8" width="0.2032" layer="51"/>
<wire x1="2" y1="-1.8" x2="2" y2="0" width="0.2032" layer="51"/>
<pad name="1" x="-1" y="0" drill="0.7" diameter="1.4478" stop="no"/>
<pad name="2" x="1" y="0" drill="0.7" diameter="1.4478" stop="no"/>
<text x="-1.27" y="5.27" size="0.6096" layer="25" font="vector" ratio="20">>Name</text>
<text x="-1.27" y="4" size="0.6096" layer="27" font="vector" ratio="20">>Value</text>
<text x="0.6" y="0.7" size="1.27" layer="51">+</text>
<text x="-1.4" y="0.7" size="1.27" layer="51">-</text>
<polygon width="0.127" layer="30">
<vertex x="-0.9975" y="-0.6604" curve="-90.025935"/>
<vertex x="-1.6604" y="0" curve="-90.017354"/>
<vertex x="-1" y="0.6604" curve="-90"/>
<vertex x="-0.3396" y="0" curve="-90.078137"/>
</polygon>
<polygon width="0.127" layer="29">
<vertex x="-1" y="-0.2865" curve="-90.08005"/>
<vertex x="-1.2865" y="0" curve="-90.040011"/>
<vertex x="-1" y="0.2865" curve="-90"/>
<vertex x="-0.7135" y="0" curve="-90"/>
</polygon>
<polygon width="0.127" layer="30">
<vertex x="1.0025" y="-0.6604" curve="-90.025935"/>
<vertex x="0.3396" y="0" curve="-90.017354"/>
<vertex x="1" y="0.6604" curve="-90"/>
<vertex x="1.6604" y="0" curve="-90.078137"/>
</polygon>
<polygon width="0.127" layer="29">
<vertex x="1" y="-0.2865" curve="-90.08005"/>
<vertex x="0.7135" y="0" curve="-90.040011"/>
<vertex x="1" y="0.2865" curve="-90"/>
<vertex x="1.2865" y="0" curve="-90"/>
</polygon>
</package>
<package name="SPRINGTERMINAL-2.54MM-2">
<description>
Spring Terminal- PCB Mount 2 Pin PTH

tDocu marks the spring arms

Specifications:

Pin count: 4

Pin pitch: 0.1"

Datasheet referenced for footprint

Example device(s):

CONN_02

</description>
<wire x1="-4.2" y1="7.88" x2="-4.2" y2="-2.8" width="0.254" layer="21"/>
<wire x1="-4.2" y1="-2.8" x2="-4.2" y2="-4.72" width="0.254" layer="51"/>
<wire x1="-4.2" y1="-4.72" x2="3.44" y2="-4.72" width="0.254" layer="51"/>
<wire x1="3.44" y1="-4.72" x2="3.44" y2="-2.8" width="0.254" layer="51"/>
<wire x1="3.44" y1="7.88" x2="-4.2" y2="7.88" width="0.254" layer="21"/>
<wire x1="0" y1="0" x2="0" y2="5.08" width="0.254" layer="1"/>
<wire x1="0" y1="0" x2="0" y2="5.08" width="0.254" layer="16"/>
<wire x1="2.54" y1="0" x2="2.54" y2="5.08" width="0.254" layer="16"/>
<wire x1="2.54" y1="0" x2="2.54" y2="5.08" width="0.254" layer="1"/>
<wire x1="-4.2" y1="-2.8" x2="3.44" y2="-2.8" width="0.254" layer="21"/>
<wire x1="3.44" y1="4" x2="3.44" y2="1" width="0.254" layer="21"/>
<wire x1="3.44" y1="7.88" x2="3.44" y2="6" width="0.254" layer="21"/>
<wire x1="3.44" y1="-0.9" x2="3.44" y2="-2.8" width="0.254" layer="21"/>
<pad name="1" x="0" y="0" drill="1.1" diameter="1.9"/>
<pad name="P$2" x="0" y="5.08" drill="1.1" diameter="1.9"/>
<pad name="P$3" x="2.54" y="5.08" drill="1.1" diameter="1.9"/>
<pad name="2" x="2.54" y="0" drill="1.1" diameter="1.9"/>
</package>
<package name="1X02_2.54_SCREWTERM">
<description>
2 Pin Screw Terminal - 2.54mm

Specifications:

Pin count:2

Pin pitch:0.1"

Example device(s):

CONN_02

</description>
<pad name="P2" x="0" y="0" drill="1.016" shape="square"/>
<pad name="P1" x="2.54" y="0" drill="1.016" shape="square"/>
<wire x1="-1.5" y1="3.25" x2="4" y2="3.25" width="0.2032" layer="21"/>
<wire x1="4" y1="3.25" x2="4" y2="2.5" width="0.2032" layer="21"/>
<wire x1="4" y1="2.5" x2="4" y2="-3.25" width="0.2032" layer="21"/>
<wire x1="4" y1="-3.25" x2="-1.5" y2="-3.25" width="0.2032" layer="21"/>
<wire x1="-1.5" y1="-3.25" x2="-1.5" y2="2.5" width="0.2032" layer="21"/>
<wire x1="-1.5" y1="2.5" x2="-1.5" y2="3.25" width="0.2032" layer="21"/>
<wire x1="-1.5" y1="2.5" x2="4" y2="2.5" width="0.2032" layer="21"/>
<text x="-1.27" y="3.429" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
<text x="-1.27" y="-4.064" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text>
</package>
<package name="2X10">
<description>
Plated Through Hole - 2x10

Specifications:

Pin count:20

Pin pitch:0.1"

Example device(s):

CONN_10x2

</description>
<wire x1="0.635" y1="-1.27" x2="1.27" y2="-0.635" width="0.2032" layer="21"/>
<wire x1="1.27" y1="-0.635" x2="1.905" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="3.175" y1="-1.27" x2="3.81" y2="-0.635" width="0.2032" layer="21"/>
<wire x1="3.81" y1="-0.635" x2="4.445" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="5.715" y1="-1.27" x2="6.35" y2="-0.635" width="0.2032" layer="21"/>
<wire x1="6.35" y1="-0.635" x2="6.985" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="8.255" y1="-1.27" x2="8.89" y2="-0.635" width="0.2032" layer="21"/>
<wire x1="8.89" y1="-0.635" x2="9.525" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="10.795" y1="-1.27" x2="11.43" y2="-0.635" width="0.2032" layer="21"/>
<wire x1="11.43" y1="-0.635" x2="12.065" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="13.335" y1="-1.27" x2="13.97" y2="-0.635" width="0.2032" layer="21"/>
<wire x1="-0.635" y1="3.81" x2="0.635" y2="3.81" width="0.2032" layer="21"/>
<wire x1="0.635" y1="3.81" x2="1.27" y2="3.175" width="0.2032" layer="21"/>
<wire x1="1.27" y1="3.175" x2="1.905" y2="3.81" width="0.2032" layer="21"/>
<wire x1="1.905" y1="3.81" x2="3.175" y2="3.81" width="0.2032" layer="21"/>
<wire x1="3.175" y1="3.81" x2="3.81" y2="3.175" width="0.2032" layer="21"/>
<wire x1="3.81" y1="3.175" x2="4.445" y2="3.81" width="0.2032" layer="21"/>
<wire x1="4.445" y1="3.81" x2="5.715" y2="3.81" width="0.2032" layer="21"/>
<wire x1="5.715" y1="3.81" x2="6.35" y2="3.175" width="0.2032" layer="21"/>
<wire x1="6.35" y1="3.175" x2="6.985" y2="3.81" width="0.2032" layer="21"/>
<wire x1="6.985" y1="3.81" x2="8.255" y2="3.81" width="0.2032" layer="21"/>
<wire x1="8.255" y1="3.81" x2="8.89" y2="3.175" width="0.2032" layer="21"/>
<wire x1="8.89" y1="3.175" x2="9.525" y2="3.81" width="0.2032" layer="21"/>
<wire x1="9.525" y1="3.81" x2="10.795" y2="3.81" width="0.2032" layer="21"/>
<wire x1="10.795" y1="3.81" x2="11.43" y2="3.175" width="0.2032" layer="21"/>
<wire x1="11.43" y1="3.175" x2="12.065" y2="3.81" width="0.2032" layer="21"/>
<wire x1="12.065" y1="3.81" x2="13.335" y2="3.81" width="0.2032" layer="21"/>
<wire x1="13.335" y1="3.81" x2="13.97" y2="3.175" width="0.2032" layer="21"/>
<wire x1="13.97" y1="3.175" x2="14.605" y2="3.81" width="0.2032" layer="21"/>
<wire x1="14.605" y1="3.81" x2="15.875" y2="3.81" width="0.2032" layer="21"/>
<wire x1="15.875" y1="3.81" x2="16.51" y2="3.175" width="0.2032" layer="21"/>
<wire x1="16.51" y1="3.175" x2="17.145" y2="3.81" width="0.2032" layer="21"/>
<wire x1="17.145" y1="3.81" x2="18.415" y2="3.81" width="0.2032" layer="21"/>
<wire x1="18.415" y1="3.81" x2="19.05" y2="3.175" width="0.2032" layer="21"/>
<wire x1="19.05" y1="3.175" x2="19.685" y2="3.81" width="0.2032" layer="21"/>
<wire x1="19.685" y1="3.81" x2="20.955" y2="3.81" width="0.2032" layer="21"/>
<wire x1="20.955" y1="3.81" x2="21.59" y2="3.175" width="0.2032" layer="21"/>
<wire x1="21.59" y1="-0.635" x2="20.955" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="19.05" y1="-0.635" x2="19.685" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="19.05" y1="-0.635" x2="18.415" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="16.51" y1="-0.635" x2="17.145" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="16.51" y1="-0.635" x2="15.875" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="13.97" y1="-0.635" x2="14.605" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="1.27" y1="3.175" x2="1.27" y2="-0.635" width="0.2032" layer="21"/>
<wire x1="3.81" y1="3.175" x2="3.81" y2="-0.635" width="0.2032" layer="21"/>
<wire x1="6.35" y1="3.175" x2="6.35" y2="-0.635" width="0.2032" layer="21"/>
<wire x1="8.89" y1="3.175" x2="8.89" y2="-0.635" width="0.2032" layer="21"/>
<wire x1="11.43" y1="3.175" x2="11.43" y2="-0.635" width="0.2032" layer="21"/>
<wire x1="13.97" y1="3.175" x2="13.97" y2="-0.635" width="0.2032" layer="21"/>
<wire x1="16.51" y1="3.175" x2="16.51" y2="-0.635" width="0.2032" layer="21"/>
<wire x1="19.05" y1="3.175" x2="19.05" y2="-0.635" width="0.2032" layer="21"/>
<wire x1="21.59" y1="3.175" x2="21.59" y2="-0.635" width="0.2032" layer="21"/>
<wire x1="19.685" y1="-1.27" x2="20.955" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="17.145" y1="-1.27" x2="18.415" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="14.605" y1="-1.27" x2="15.875" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="12.065" y1="-1.27" x2="13.335" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="9.525" y1="-1.27" x2="10.795" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="6.985" y1="-1.27" x2="8.255" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="4.445" y1="-1.27" x2="5.715" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="1.905" y1="-1.27" x2="3.175" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="-0.635" y1="-1.27" x2="0.635" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="21.59" y1="3.175" x2="22.225" y2="3.81" width="0.2032" layer="21"/>
<wire x1="22.225" y1="3.81" x2="23.495" y2="3.81" width="0.2032" layer="21"/>
<wire x1="23.495" y1="3.81" x2="24.13" y2="3.175" width="0.2032" layer="21"/>
<wire x1="24.13" y1="-0.635" x2="23.495" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="21.59" y1="-0.635" x2="22.225" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="24.13" y1="3.175" x2="24.13" y2="-0.635" width="0.2032" layer="21"/>
<wire x1="22.225" y1="-1.27" x2="23.495" y2="-1.27" width="0.2032" layer="21"/>
<pad name="1" x="0" y="0" drill="1.016" diameter="1.8796"/>
<pad name="2" x="0" y="2.54" drill="1.016" diameter="1.8796"/>
<pad name="3" x="2.54" y="0" drill="1.016" diameter="1.8796"/>
<pad name="4" x="2.54" y="2.54" drill="1.016" diameter="1.8796"/>
<pad name="5" x="5.08" y="0" drill="1.016" diameter="1.8796"/>
<pad name="6" x="5.08" y="2.54" drill="1.016" diameter="1.8796"/>
<pad name="7" x="7.62" y="0" drill="1.016" diameter="1.8796"/>
<pad name="8" x="7.62" y="2.54" drill="1.016" diameter="1.8796"/>
<pad name="9" x="10.16" y="0" drill="1.016" diameter="1.8796"/>
<pad name="10" x="10.16" y="2.54" drill="1.016" diameter="1.8796"/>
<pad name="11" x="12.7" y="0" drill="1.016" diameter="1.8796"/>
<pad name="12" x="12.7" y="2.54" drill="1.016" diameter="1.8796"/>
<pad name="13" x="15.24" y="0" drill="1.016" diameter="1.8796"/>
<pad name="14" x="15.24" y="2.54" drill="1.016" diameter="1.8796"/>
<pad name="15" x="17.78" y="0" drill="1.016" diameter="1.8796"/>
<pad name="16" x="17.78" y="2.54" drill="1.016" diameter="1.8796"/>
<pad name="17" x="20.32" y="0" drill="1.016" diameter="1.8796"/>
<pad name="18" x="20.32" y="2.54" drill="1.016" diameter="1.8796"/>
<pad name="19" x="22.86" y="0" drill="1.016" diameter="1.8796"/>
<pad name="20" x="22.86" y="2.54" drill="1.016" diameter="1.8796"/>
<rectangle x1="-0.254" y1="-0.254" x2="0.254" y2="0.254" layer="51"/>
<rectangle x1="-0.254" y1="2.286" x2="0.254" y2="2.794" layer="51"/>
<rectangle x1="2.286" y1="2.286" x2="2.794" y2="2.794" layer="51"/>
<rectangle x1="2.286" y1="-0.254" x2="2.794" y2="0.254" layer="51"/>
<rectangle x1="4.826" y1="2.286" x2="5.334" y2="2.794" layer="51"/>
<rectangle x1="4.826" y1="-0.254" x2="5.334" y2="0.254" layer="51"/>
<rectangle x1="7.366" y1="2.286" x2="7.874" y2="2.794" layer="51"/>
<rectangle x1="9.906" y1="2.286" x2="10.414" y2="2.794" layer="51"/>
<rectangle x1="12.446" y1="2.286" x2="12.954" y2="2.794" layer="51"/>
<rectangle x1="7.366" y1="-0.254" x2="7.874" y2="0.254" layer="51"/>
<rectangle x1="9.906" y1="-0.254" x2="10.414" y2="0.254" layer="51"/>
<rectangle x1="12.446" y1="-0.254" x2="12.954" y2="0.254" layer="51"/>
<rectangle x1="14.986" y1="2.286" x2="15.494" y2="2.794" layer="51"/>
<rectangle x1="14.986" y1="-0.254" x2="15.494" y2="0.254" layer="51"/>
<rectangle x1="17.526" y1="2.286" x2="18.034" y2="2.794" layer="51"/>
<rectangle x1="17.526" y1="-0.254" x2="18.034" y2="0.254" layer="51"/>
<rectangle x1="20.066" y1="2.286" x2="20.574" y2="2.794" layer="51"/>
<rectangle x1="20.066" y1="-0.254" x2="20.574" y2="0.254" layer="51"/>
<rectangle x1="22.606" y1="2.286" x2="23.114" y2="2.794" layer="51"/>
<rectangle x1="22.606" y1="-0.254" x2="23.114" y2="0.254" layer="51"/>
<wire x1="-0.635" y1="-1.651" x2="0.635" y2="-1.651" width="0.2032" layer="21"/>
<wire x1="-0.635" y1="-1.651" x2="0.635" y2="-1.651" width="0.2032" layer="22"/>
<wire x1="-1.27" y1="-0.635" x2="-0.635" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="-1.27" y1="-0.635" x2="-1.27" y2="3.175" width="0.2032" layer="21"/>
<wire x1="-1.27" y1="3.175" x2="-0.635" y2="3.81" width="0.2032" layer="21"/>
<text x="-1.27" y="4.064" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
<text x="-1.27" y="-2.413" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text>
</package>
<package name="2X10_LOCK">
<description>
Plated Through Hole - 2x10 Locking Footprint

Holes are offset 0.005", to hold pins in place while soldering.

Specifications:

Pin count:20

Pin pitch:0.1"

Example device(s):

CONN_10x2

</description>
<wire x1="0.635" y1="-1.27" x2="1.27" y2="-0.635" width="0.2032" layer="21"/>
<wire x1="1.27" y1="-0.635" x2="1.905" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="3.175" y1="-1.27" x2="3.81" y2="-0.635" width="0.2032" layer="21"/>
<wire x1="3.81" y1="-0.635" x2="4.445" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="5.715" y1="-1.27" x2="6.35" y2="-0.635" width="0.2032" layer="21"/>
<wire x1="6.35" y1="-0.635" x2="6.985" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="8.255" y1="-1.27" x2="8.89" y2="-0.635" width="0.2032" layer="21"/>
<wire x1="8.89" y1="-0.635" x2="9.525" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="10.795" y1="-1.27" x2="11.43" y2="-0.635" width="0.2032" layer="21"/>
<wire x1="11.43" y1="-0.635" x2="12.065" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="13.335" y1="-1.27" x2="13.97" y2="-0.635" width="0.2032" layer="21"/>
<wire x1="-0.635" y1="3.81" x2="0.635" y2="3.81" width="0.2032" layer="21"/>
<wire x1="0.635" y1="3.81" x2="1.27" y2="3.175" width="0.2032" layer="21"/>
<wire x1="1.27" y1="3.175" x2="1.905" y2="3.81" width="0.2032" layer="21"/>
<wire x1="1.905" y1="3.81" x2="3.175" y2="3.81" width="0.2032" layer="21"/>
<wire x1="3.175" y1="3.81" x2="3.81" y2="3.175" width="0.2032" layer="21"/>
<wire x1="3.81" y1="3.175" x2="4.445" y2="3.81" width="0.2032" layer="21"/>
<wire x1="4.445" y1="3.81" x2="5.715" y2="3.81" width="0.2032" layer="21"/>
<wire x1="5.715" y1="3.81" x2="6.35" y2="3.175" width="0.2032" layer="21"/>
<wire x1="6.35" y1="3.175" x2="6.985" y2="3.81" width="0.2032" layer="21"/>
<wire x1="6.985" y1="3.81" x2="8.255" y2="3.81" width="0.2032" layer="21"/>
<wire x1="8.255" y1="3.81" x2="8.89" y2="3.175" width="0.2032" layer="21"/>
<wire x1="8.89" y1="3.175" x2="9.525" y2="3.81" width="0.2032" layer="21"/>
<wire x1="9.525" y1="3.81" x2="10.795" y2="3.81" width="0.2032" layer="21"/>
<wire x1="10.795" y1="3.81" x2="11.43" y2="3.175" width="0.2032" layer="21"/>
<wire x1="11.43" y1="3.175" x2="12.065" y2="3.81" width="0.2032" layer="21"/>
<wire x1="12.065" y1="3.81" x2="13.335" y2="3.81" width="0.2032" layer="21"/>
<wire x1="13.335" y1="3.81" x2="13.97" y2="3.175" width="0.2032" layer="21"/>
<wire x1="13.97" y1="3.175" x2="14.605" y2="3.81" width="0.2032" layer="21"/>
<wire x1="14.605" y1="3.81" x2="15.875" y2="3.81" width="0.2032" layer="21"/>
<wire x1="15.875" y1="3.81" x2="16.51" y2="3.175" width="0.2032" layer="21"/>
<wire x1="16.51" y1="3.175" x2="17.145" y2="3.81" width="0.2032" layer="21"/>
<wire x1="17.145" y1="3.81" x2="18.415" y2="3.81" width="0.2032" layer="21"/>
<wire x1="18.415" y1="3.81" x2="19.05" y2="3.175" width="0.2032" layer="21"/>
<wire x1="19.05" y1="3.175" x2="19.685" y2="3.81" width="0.2032" layer="21"/>
<wire x1="19.685" y1="3.81" x2="20.955" y2="3.81" width="0.2032" layer="21"/>
<wire x1="20.955" y1="3.81" x2="21.59" y2="3.175" width="0.2032" layer="21"/>
<wire x1="21.59" y1="-0.635" x2="20.955" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="19.05" y1="-0.635" x2="19.685" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="19.05" y1="-0.635" x2="18.415" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="16.51" y1="-0.635" x2="17.145" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="16.51" y1="-0.635" x2="15.875" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="13.97" y1="-0.635" x2="14.605" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="1.27" y1="3.175" x2="1.27" y2="-0.635" width="0.2032" layer="21"/>
<wire x1="3.81" y1="3.175" x2="3.81" y2="-0.635" width="0.2032" layer="21"/>
<wire x1="6.35" y1="3.175" x2="6.35" y2="-0.635" width="0.2032" layer="21"/>
<wire x1="8.89" y1="3.175" x2="8.89" y2="-0.635" width="0.2032" layer="21"/>
<wire x1="11.43" y1="3.175" x2="11.43" y2="-0.635" width="0.2032" layer="21"/>
<wire x1="13.97" y1="3.175" x2="13.97" y2="-0.635" width="0.2032" layer="21"/>
<wire x1="16.51" y1="3.175" x2="16.51" y2="-0.635" width="0.2032" layer="21"/>
<wire x1="19.05" y1="3.175" x2="19.05" y2="-0.635" width="0.2032" layer="21"/>
<wire x1="21.59" y1="3.175" x2="21.59" y2="-0.635" width="0.2032" layer="21"/>
<wire x1="19.685" y1="-1.27" x2="20.955" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="17.145" y1="-1.27" x2="18.415" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="14.605" y1="-1.27" x2="15.875" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="12.065" y1="-1.27" x2="13.335" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="9.525" y1="-1.27" x2="10.795" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="6.985" y1="-1.27" x2="8.255" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="4.445" y1="-1.27" x2="5.715" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="1.905" y1="-1.27" x2="3.175" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="-0.635" y1="-1.27" x2="0.635" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="21.59" y1="3.175" x2="22.225" y2="3.81" width="0.2032" layer="21"/>
<wire x1="22.225" y1="3.81" x2="23.495" y2="3.81" width="0.2032" layer="21"/>
<wire x1="23.495" y1="3.81" x2="24.13" y2="3.175" width="0.2032" layer="21"/>
<wire x1="24.13" y1="-0.635" x2="23.495" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="21.59" y1="-0.635" x2="22.225" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="24.13" y1="3.175" x2="24.13" y2="-0.635" width="0.2032" layer="21"/>
<wire x1="22.225" y1="-1.27" x2="23.495" y2="-1.27" width="0.2032" layer="21"/>
<pad name="1" x="0" y="0.127" drill="1.016" diameter="1.8796"/>
<pad name="2" x="0" y="2.667" drill="1.016" diameter="1.8796"/>
<pad name="3" x="2.54" y="-0.127" drill="1.016" diameter="1.8796"/>
<pad name="4" x="2.54" y="2.413" drill="1.016" diameter="1.8796"/>
<pad name="5" x="5.08" y="0.127" drill="1.016" diameter="1.8796"/>
<pad name="6" x="5.08" y="2.667" drill="1.016" diameter="1.8796"/>
<pad name="7" x="7.62" y="-0.127" drill="1.016" diameter="1.8796"/>
<pad name="8" x="7.62" y="2.413" drill="1.016" diameter="1.8796"/>
<pad name="9" x="10.16" y="0.127" drill="1.016" diameter="1.8796"/>
<pad name="10" x="10.16" y="2.667" drill="1.016" diameter="1.8796"/>
<pad name="11" x="12.7" y="-0.127" drill="1.016" diameter="1.8796"/>
<pad name="12" x="12.7" y="2.413" drill="1.016" diameter="1.8796"/>
<pad name="13" x="15.24" y="0.127" drill="1.016" diameter="1.8796"/>
<pad name="14" x="15.24" y="2.667" drill="1.016" diameter="1.8796"/>
<pad name="15" x="17.78" y="-0.127" drill="1.016" diameter="1.8796"/>
<pad name="16" x="17.78" y="2.413" drill="1.016" diameter="1.8796"/>
<pad name="17" x="20.32" y="0.127" drill="1.016" diameter="1.8796"/>
<pad name="18" x="20.32" y="2.667" drill="1.016" diameter="1.8796"/>
<pad name="19" x="22.86" y="-0.127" drill="1.016" diameter="1.8796"/>
<pad name="20" x="22.86" y="2.413" drill="1.016" diameter="1.8796"/>
<rectangle x1="-0.254" y1="-0.254" x2="0.254" y2="0.254" layer="51"/>
<rectangle x1="-0.254" y1="2.286" x2="0.254" y2="2.794" layer="51"/>
<rectangle x1="2.286" y1="2.286" x2="2.794" y2="2.794" layer="51"/>
<rectangle x1="2.286" y1="-0.254" x2="2.794" y2="0.254" layer="51"/>
<rectangle x1="4.826" y1="2.286" x2="5.334" y2="2.794" layer="51"/>
<rectangle x1="4.826" y1="-0.254" x2="5.334" y2="0.254" layer="51"/>
<rectangle x1="7.366" y1="2.286" x2="7.874" y2="2.794" layer="51"/>
<rectangle x1="9.906" y1="2.286" x2="10.414" y2="2.794" layer="51"/>
<rectangle x1="12.446" y1="2.286" x2="12.954" y2="2.794" layer="51"/>
<rectangle x1="7.366" y1="-0.254" x2="7.874" y2="0.254" layer="51"/>
<rectangle x1="9.906" y1="-0.254" x2="10.414" y2="0.254" layer="51"/>
<rectangle x1="12.446" y1="-0.254" x2="12.954" y2="0.254" layer="51"/>
<rectangle x1="14.986" y1="2.286" x2="15.494" y2="2.794" layer="51"/>
<rectangle x1="14.986" y1="-0.254" x2="15.494" y2="0.254" layer="51"/>
<rectangle x1="17.526" y1="2.286" x2="18.034" y2="2.794" layer="51"/>
<rectangle x1="17.526" y1="-0.254" x2="18.034" y2="0.254" layer="51"/>
<rectangle x1="20.066" y1="2.286" x2="20.574" y2="2.794" layer="51"/>
<rectangle x1="20.066" y1="-0.254" x2="20.574" y2="0.254" layer="51"/>
<rectangle x1="22.606" y1="2.286" x2="23.114" y2="2.794" layer="51"/>
<rectangle x1="22.606" y1="-0.254" x2="23.114" y2="0.254" layer="51"/>
<wire x1="-1.27" y1="-0.635" x2="-0.635" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="-1.27" y1="-0.635" x2="-1.27" y2="3.175" width="0.2032" layer="21"/>
<wire x1="-1.27" y1="3.175" x2="-0.635" y2="3.81" width="0.2032" layer="21"/>
<text x="-1.27" y="4.064" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
<text x="-1.27" y="-2.413" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text>
<wire x1="-0.762" y1="-1.651" x2="0.635" y2="-1.651" width="0.2032" layer="21"/>
<wire x1="0.635" y1="-1.651" x2="-0.762" y2="-1.651" width="0.2032" layer="22"/>
</package>
<package name="2X10_LOCK_SPECIAL">
<description>
Plated Through Hole - 2x10 Locking Footprint Special

Holes are offset 0.005", to hold pins in place while soldering.
Pin rows are offset 5mm as well

Specifications:

Pin count:20

Pin pitch:0.1"

Example device(s):

CONN_10x2

</description>
<wire x1="-1.27" y1="-0.7874" x2="-0.635" y2="-1.4224" width="0.2032" layer="21"/>
<wire x1="0.635" y1="-1.4224" x2="1.27" y2="-0.7874" width="0.2032" layer="21"/>
<wire x1="1.27" y1="-0.7874" x2="1.905" y2="-1.4224" width="0.2032" layer="21"/>
<wire x1="3.175" y1="-1.4224" x2="3.81" y2="-0.7874" width="0.2032" layer="21"/>
<wire x1="3.81" y1="-0.7874" x2="4.445" y2="-1.4224" width="0.2032" layer="21"/>
<wire x1="5.715" y1="-1.4224" x2="6.35" y2="-0.7874" width="0.2032" layer="21"/>
<wire x1="6.35" y1="-0.7874" x2="6.985" y2="-1.4224" width="0.2032" layer="21"/>
<wire x1="8.255" y1="-1.4224" x2="8.89" y2="-0.7874" width="0.2032" layer="21"/>
<wire x1="8.89" y1="-0.7874" x2="9.525" y2="-1.4224" width="0.2032" layer="21"/>
<wire x1="10.795" y1="-1.4224" x2="11.43" y2="-0.7874" width="0.2032" layer="21"/>
<wire x1="11.43" y1="-0.7874" x2="12.065" y2="-1.4224" width="0.2032" layer="21"/>
<wire x1="13.335" y1="-1.4224" x2="13.97" y2="-0.7874" width="0.2032" layer="21"/>
<wire x1="-1.27" y1="-0.7874" x2="-1.27" y2="3.3274" width="0.2032" layer="21"/>
<wire x1="-1.27" y1="3.3274" x2="-0.635" y2="3.9624" width="0.2032" layer="21"/>
<wire x1="-0.635" y1="3.9624" x2="0.635" y2="3.9624" width="0.2032" layer="21"/>
<wire x1="0.635" y1="3.9624" x2="1.27" y2="3.3274" width="0.2032" layer="21"/>
<wire x1="1.27" y1="3.3274" x2="1.905" y2="3.9624" width="0.2032" layer="21"/>
<wire x1="1.905" y1="3.9624" x2="3.175" y2="3.9624" width="0.2032" layer="21"/>
<wire x1="3.175" y1="3.9624" x2="3.81" y2="3.3274" width="0.2032" layer="21"/>
<wire x1="3.81" y1="3.3274" x2="4.445" y2="3.9624" width="0.2032" layer="21"/>
<wire x1="4.445" y1="3.9624" x2="5.715" y2="3.9624" width="0.2032" layer="21"/>
<wire x1="5.715" y1="3.9624" x2="6.35" y2="3.3274" width="0.2032" layer="21"/>
<wire x1="6.35" y1="3.3274" x2="6.985" y2="3.9624" width="0.2032" layer="21"/>
<wire x1="6.985" y1="3.9624" x2="8.255" y2="3.9624" width="0.2032" layer="21"/>
<wire x1="8.255" y1="3.9624" x2="8.89" y2="3.3274" width="0.2032" layer="21"/>
<wire x1="8.89" y1="3.3274" x2="9.525" y2="3.9624" width="0.2032" layer="21"/>
<wire x1="9.525" y1="3.9624" x2="10.795" y2="3.9624" width="0.2032" layer="21"/>
<wire x1="10.795" y1="3.9624" x2="11.43" y2="3.3274" width="0.2032" layer="21"/>
<wire x1="11.43" y1="3.3274" x2="12.065" y2="3.9624" width="0.2032" layer="21"/>
<wire x1="12.065" y1="3.9624" x2="13.335" y2="3.9624" width="0.2032" layer="21"/>
<wire x1="13.335" y1="3.9624" x2="13.97" y2="3.3274" width="0.2032" layer="21"/>
<wire x1="13.97" y1="3.3274" x2="14.605" y2="3.9624" width="0.2032" layer="21"/>
<wire x1="14.605" y1="3.9624" x2="15.875" y2="3.9624" width="0.2032" layer="21"/>
<wire x1="15.875" y1="3.9624" x2="16.51" y2="3.3274" width="0.2032" layer="21"/>
<wire x1="16.51" y1="3.3274" x2="17.145" y2="3.9624" width="0.2032" layer="21"/>
<wire x1="17.145" y1="3.9624" x2="18.415" y2="3.9624" width="0.2032" layer="21"/>
<wire x1="18.415" y1="3.9624" x2="19.05" y2="3.3274" width="0.2032" layer="21"/>
<wire x1="19.05" y1="3.3274" x2="19.685" y2="3.9624" width="0.2032" layer="21"/>
<wire x1="19.685" y1="3.9624" x2="20.955" y2="3.9624" width="0.2032" layer="21"/>
<wire x1="20.955" y1="3.9624" x2="21.59" y2="3.3274" width="0.2032" layer="21"/>
<wire x1="21.59" y1="-0.7874" x2="20.955" y2="-1.4224" width="0.2032" layer="21"/>
<wire x1="19.05" y1="-0.7874" x2="19.685" y2="-1.4224" width="0.2032" layer="21"/>
<wire x1="19.05" y1="-0.7874" x2="18.415" y2="-1.4224" width="0.2032" layer="21"/>
<wire x1="16.51" y1="-0.7874" x2="17.145" y2="-1.4224" width="0.2032" layer="21"/>
<wire x1="16.51" y1="-0.7874" x2="15.875" y2="-1.4224" width="0.2032" layer="21"/>
<wire x1="13.97" y1="-0.7874" x2="14.605" y2="-1.4224" width="0.2032" layer="21"/>
<wire x1="1.27" y1="3.3274" x2="1.27" y2="-0.7874" width="0.2032" layer="21"/>
<wire x1="3.81" y1="3.3274" x2="3.81" y2="-0.7874" width="0.2032" layer="21"/>
<wire x1="6.35" y1="3.3274" x2="6.35" y2="-0.7874" width="0.2032" layer="21"/>
<wire x1="8.89" y1="3.3274" x2="8.89" y2="-0.7874" width="0.2032" layer="21"/>
<wire x1="11.43" y1="3.3274" x2="11.43" y2="-0.7874" width="0.2032" layer="21"/>
<wire x1="13.97" y1="3.3274" x2="13.97" y2="-0.7874" width="0.2032" layer="21"/>
<wire x1="16.51" y1="3.3274" x2="16.51" y2="-0.7874" width="0.2032" layer="21"/>
<wire x1="19.05" y1="3.3274" x2="19.05" y2="-0.7874" width="0.2032" layer="21"/>
<wire x1="21.59" y1="3.3274" x2="21.59" y2="-0.7874" width="0.2032" layer="21"/>
<wire x1="19.685" y1="-1.4224" x2="20.955" y2="-1.4224" width="0.2032" layer="21"/>
<wire x1="17.145" y1="-1.4224" x2="18.415" y2="-1.4224" width="0.2032" layer="21"/>
<wire x1="14.605" y1="-1.4224" x2="15.875" y2="-1.4224" width="0.2032" layer="21"/>
<wire x1="12.065" y1="-1.4224" x2="13.335" y2="-1.4224" width="0.2032" layer="21"/>
<wire x1="9.525" y1="-1.4224" x2="10.795" y2="-1.4224" width="0.2032" layer="21"/>
<wire x1="6.985" y1="-1.4224" x2="8.255" y2="-1.4224" width="0.2032" layer="21"/>
<wire x1="4.445" y1="-1.4224" x2="5.715" y2="-1.4224" width="0.2032" layer="21"/>
<wire x1="1.905" y1="-1.4224" x2="3.175" y2="-1.4224" width="0.2032" layer="21"/>
<wire x1="-0.635" y1="-1.4224" x2="0.635" y2="-1.4224" width="0.2032" layer="21"/>
<wire x1="21.59" y1="3.3274" x2="22.225" y2="3.9624" width="0.2032" layer="21"/>
<wire x1="22.225" y1="3.9624" x2="23.495" y2="3.9624" width="0.2032" layer="21"/>
<wire x1="23.495" y1="3.9624" x2="24.13" y2="3.3274" width="0.2032" layer="21"/>
<wire x1="24.13" y1="-0.7874" x2="23.495" y2="-1.4224" width="0.2032" layer="21"/>
<wire x1="21.59" y1="-0.7874" x2="22.225" y2="-1.4224" width="0.2032" layer="21"/>
<wire x1="24.13" y1="3.3274" x2="24.13" y2="-0.7874" width="0.2032" layer="21"/>
<wire x1="22.225" y1="-1.4224" x2="23.495" y2="-1.4224" width="0.2032" layer="21"/>
<pad name="1" x="0" y="-0.1524" drill="1.016" diameter="1.8796"/>
<pad name="2" x="0" y="2.9464" drill="1.016" diameter="1.8796"/>
<pad name="3" x="2.54" y="-0.4064" drill="1.016" diameter="1.8796"/>
<pad name="4" x="2.54" y="2.6924" drill="1.016" diameter="1.8796"/>
<pad name="5" x="5.08" y="-0.1524" drill="1.016" diameter="1.8796"/>
<pad name="6" x="5.08" y="2.9464" drill="1.016" diameter="1.8796"/>
<pad name="7" x="7.62" y="-0.4064" drill="1.016" diameter="1.8796"/>
<pad name="8" x="7.62" y="2.6924" drill="1.016" diameter="1.8796"/>
<pad name="9" x="10.16" y="-0.1524" drill="1.016" diameter="1.8796"/>
<pad name="10" x="10.16" y="2.9464" drill="1.016" diameter="1.8796"/>
<pad name="11" x="12.7" y="-0.4064" drill="1.016" diameter="1.8796"/>
<pad name="12" x="12.7" y="2.6924" drill="1.016" diameter="1.8796"/>
<pad name="13" x="15.24" y="-0.1524" drill="1.016" diameter="1.8796"/>
<pad name="14" x="15.24" y="2.9464" drill="1.016" diameter="1.8796"/>
<pad name="15" x="17.78" y="-0.4064" drill="1.016" diameter="1.8796"/>
<pad name="16" x="17.78" y="2.6924" drill="1.016" diameter="1.8796"/>
<pad name="17" x="20.32" y="-0.1524" drill="1.016" diameter="1.8796"/>
<pad name="18" x="20.32" y="2.9464" drill="1.016" diameter="1.8796"/>
<pad name="19" x="22.86" y="-0.4064" drill="1.016" diameter="1.8796"/>
<pad name="20" x="22.86" y="2.6924" drill="1.016" diameter="1.8796"/>
<rectangle x1="-0.254" y1="-0.5334" x2="0.254" y2="-0.0254" layer="51"/>
<rectangle x1="-0.254" y1="2.5654" x2="0.254" y2="3.0734" layer="51"/>
<rectangle x1="2.286" y1="2.5654" x2="2.794" y2="3.0734" layer="51"/>
<rectangle x1="2.286" y1="-0.5334" x2="2.794" y2="-0.0254" layer="51"/>
<rectangle x1="4.826" y1="2.5654" x2="5.334" y2="3.0734" layer="51"/>
<rectangle x1="4.826" y1="-0.5334" x2="5.334" y2="-0.0254" layer="51"/>
<rectangle x1="7.366" y1="2.5654" x2="7.874" y2="3.0734" layer="51"/>
<rectangle x1="9.906" y1="2.5654" x2="10.414" y2="3.0734" layer="51"/>
<rectangle x1="12.446" y1="2.5654" x2="12.954" y2="3.0734" layer="51"/>
<rectangle x1="7.366" y1="-0.5334" x2="7.874" y2="-0.0254" layer="51"/>
<rectangle x1="9.906" y1="-0.5334" x2="10.414" y2="-0.0254" layer="51"/>
<rectangle x1="12.446" y1="-0.5334" x2="12.954" y2="-0.0254" layer="51"/>
<rectangle x1="14.986" y1="2.5654" x2="15.494" y2="3.0734" layer="51"/>
<rectangle x1="14.986" y1="-0.5334" x2="15.494" y2="-0.0254" layer="51"/>
<rectangle x1="17.526" y1="2.5654" x2="18.034" y2="3.0734" layer="51"/>
<rectangle x1="17.526" y1="-0.5334" x2="18.034" y2="-0.0254" layer="51"/>
<rectangle x1="20.066" y1="2.5654" x2="20.574" y2="3.0734" layer="51"/>
<rectangle x1="20.066" y1="-0.5334" x2="20.574" y2="-0.0254" layer="51"/>
<rectangle x1="22.606" y1="2.5654" x2="23.114" y2="3.0734" layer="51"/>
<rectangle x1="22.606" y1="-0.5334" x2="23.114" y2="-0.0254" layer="51"/>
<rectangle x1="-2.794" y1="2.5654" x2="-2.286" y2="3.0734" layer="51"/>
<rectangle x1="-2.794" y1="-0.5334" x2="-2.286" y2="-0.0254" layer="51"/>
<rectangle x1="25.146" y1="2.5654" x2="25.654" y2="3.0734" layer="51"/>
<rectangle x1="25.146" y1="-0.5334" x2="25.654" y2="-0.0254" layer="51"/>
<text x="-1.27" y="4.191" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
<text x="-1.27" y="-2.54" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text>
<wire x1="-0.762" y1="-1.778" x2="0.635" y2="-1.778" width="0.2032" layer="22"/>
<wire x1="0.635" y1="-1.778" x2="-0.762" y2="-1.778" width="0.2032" layer="21"/>
</package>
<package name="2X10_NOSILK">
<description>
Plated Through Hole - 2x10 No Silk Outline

Specifications:

Pin count:20

Pin pitch:0.1"

Example device(s):

CONN_10x2

</description>
<pad name="1" x="0" y="0" drill="1.016" diameter="1.8796"/>
<pad name="2" x="0" y="2.54" drill="1.016" diameter="1.8796"/>
<pad name="3" x="2.54" y="0" drill="1.016" diameter="1.8796"/>
<pad name="4" x="2.54" y="2.54" drill="1.016" diameter="1.8796"/>
<pad name="5" x="5.08" y="0" drill="1.016" diameter="1.8796"/>
<pad name="6" x="5.08" y="2.54" drill="1.016" diameter="1.8796"/>
<pad name="7" x="7.62" y="0" drill="1.016" diameter="1.8796"/>
<pad name="8" x="7.62" y="2.54" drill="1.016" diameter="1.8796"/>
<pad name="9" x="10.16" y="0" drill="1.016" diameter="1.8796"/>
<pad name="10" x="10.16" y="2.54" drill="1.016" diameter="1.8796"/>
<pad name="11" x="12.7" y="0" drill="1.016" diameter="1.8796"/>
<pad name="12" x="12.7" y="2.54" drill="1.016" diameter="1.8796"/>
<pad name="13" x="15.24" y="0" drill="1.016" diameter="1.8796"/>
<pad name="14" x="15.24" y="2.54" drill="1.016" diameter="1.8796"/>
<pad name="15" x="17.78" y="0" drill="1.016" diameter="1.8796"/>
<pad name="16" x="17.78" y="2.54" drill="1.016" diameter="1.8796"/>
<pad name="17" x="20.32" y="0" drill="1.016" diameter="1.8796"/>
<pad name="18" x="20.32" y="2.54" drill="1.016" diameter="1.8796"/>
<pad name="19" x="22.86" y="0" drill="1.016" diameter="1.8796"/>
<pad name="20" x="22.86" y="2.54" drill="1.016" diameter="1.8796"/>
<rectangle x1="-0.254" y1="-0.254" x2="0.254" y2="0.254" layer="51"/>
<rectangle x1="-0.254" y1="2.286" x2="0.254" y2="2.794" layer="51"/>
<rectangle x1="2.286" y1="2.286" x2="2.794" y2="2.794" layer="51"/>
<rectangle x1="2.286" y1="-0.254" x2="2.794" y2="0.254" layer="51"/>
<rectangle x1="4.826" y1="2.286" x2="5.334" y2="2.794" layer="51"/>
<rectangle x1="4.826" y1="-0.254" x2="5.334" y2="0.254" layer="51"/>
<rectangle x1="7.366" y1="2.286" x2="7.874" y2="2.794" layer="51"/>
<rectangle x1="9.906" y1="2.286" x2="10.414" y2="2.794" layer="51"/>
<rectangle x1="12.446" y1="2.286" x2="12.954" y2="2.794" layer="51"/>
<rectangle x1="7.366" y1="-0.254" x2="7.874" y2="0.254" layer="51"/>
<rectangle x1="9.906" y1="-0.254" x2="10.414" y2="0.254" layer="51"/>
<rectangle x1="12.446" y1="-0.254" x2="12.954" y2="0.254" layer="51"/>
<rectangle x1="14.986" y1="2.286" x2="15.494" y2="2.794" layer="51"/>
<rectangle x1="14.986" y1="-0.254" x2="15.494" y2="0.254" layer="51"/>
<rectangle x1="17.526" y1="2.286" x2="18.034" y2="2.794" layer="51"/>
<rectangle x1="17.526" y1="-0.254" x2="18.034" y2="0.254" layer="51"/>
<rectangle x1="20.066" y1="2.286" x2="20.574" y2="2.794" layer="51"/>
<rectangle x1="20.066" y1="-0.254" x2="20.574" y2="0.254" layer="51"/>
<rectangle x1="22.606" y1="2.286" x2="23.114" y2="2.794" layer="51"/>
<rectangle x1="22.606" y1="-0.254" x2="23.114" y2="0.254" layer="51"/>
<text x="-1.27" y="4.064" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
<text x="-1.27" y="-2.413" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text>
<wire x1="-0.889" y1="-1.397" x2="0.762" y2="-1.397" width="0.2032" layer="51"/>
<wire x1="0.762" y1="-1.397" x2="-0.889" y2="-1.397" width="0.2032" layer="52"/>
</package>
</packages>
<symbols>
<symbol name="M02">
<wire x1="3.81" y1="-2.54" x2="-2.54" y2="-2.54" width="0.4064" layer="94"/>
<wire x1="1.27" y1="2.54" x2="2.54" y2="2.54" width="0.6096" layer="94"/>
<wire x1="1.27" y1="0" x2="2.54" y2="0" width="0.6096" layer="94"/>
<wire x1="-2.54" y1="5.08" x2="-2.54" y2="-2.54" width="0.4064" layer="94"/>
<wire x1="3.81" y1="-2.54" x2="3.81" y2="5.08" width="0.4064" layer="94"/>
<wire x1="-2.54" y1="5.08" x2="3.81" y2="5.08" width="0.4064" layer="94"/>
<text x="-2.54" y="-5.08" size="1.778" layer="96">>VALUE</text>
<text x="-2.54" y="5.842" size="1.778" layer="95">>NAME</text>
<pin name="1" x="7.62" y="0" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
<pin name="2" x="7.62" y="2.54" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
</symbol>
<symbol name="M04">
<wire x1="1.27" y1="-5.08" x2="-5.08" y2="-5.08" width="0.4064" layer="94"/>
<wire x1="-1.27" y1="2.54" x2="0" y2="2.54" width="0.6096" layer="94"/>
<wire x1="-1.27" y1="0" x2="0" y2="0" width="0.6096" layer="94"/>
<wire x1="-1.27" y1="-2.54" x2="0" y2="-2.54" width="0.6096" layer="94"/>
<wire x1="-5.08" y1="7.62" x2="-5.08" y2="-5.08" width="0.4064" layer="94"/>
<wire x1="1.27" y1="-5.08" x2="1.27" y2="7.62" width="0.4064" layer="94"/>
<wire x1="-5.08" y1="7.62" x2="1.27" y2="7.62" width="0.4064" layer="94"/>
<wire x1="-1.27" y1="5.08" x2="0" y2="5.08" width="0.6096" layer="94"/>
<text x="-5.08" y="-7.62" size="1.778" layer="96">>VALUE</text>
<text x="-5.08" y="8.382" size="1.778" layer="95">>NAME</text>
<pin name="1" x="5.08" y="-2.54" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
<pin name="2" x="5.08" y="0" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
<pin name="3" x="5.08" y="2.54" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
<pin name="4" x="5.08" y="5.08" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
</symbol>
<symbol name="CONN_02">
<description>
2 Pin Connection
</description>
<wire x1="3.81" y1="-2.54" x2="-2.54" y2="-2.54" width="0.4064" layer="94"/>
<wire x1="1.27" y1="2.54" x2="2.54" y2="2.54" width="0.6096" layer="94"/>
<wire x1="1.27" y1="0" x2="2.54" y2="0" width="0.6096" layer="94"/>
<wire x1="-2.54" y1="5.08" x2="-2.54" y2="-2.54" width="0.4064" layer="94"/>
<wire x1="3.81" y1="-2.54" x2="3.81" y2="5.08" width="0.4064" layer="94"/>
<wire x1="-2.54" y1="5.08" x2="3.81" y2="5.08" width="0.4064" layer="94"/>
<text x="-2.54" y="-4.826" size="1.778" layer="96" font="vector">>VALUE</text>
<text x="-2.54" y="5.588" size="1.778" layer="95" font="vector">>NAME</text>
<pin name="1" x="7.62" y="0" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
<pin name="2" x="7.62" y="2.54" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
</symbol>
<symbol name="CONN_10X2">
<description>
 20 Pin Connection

10x2 pin layout</description>
<wire x1="-1.27" y1="5.08" x2="-2.54" y2="5.08" width="0.6096" layer="94"/>
<wire x1="-1.27" y1="7.62" x2="-2.54" y2="7.62" width="0.6096" layer="94"/>
<wire x1="-1.27" y1="10.16" x2="-2.54" y2="10.16" width="0.6096" layer="94"/>
<wire x1="-3.81" y1="12.7" x2="-3.81" y2="-15.24" width="0.4064" layer="94"/>
<wire x1="-1.27" y1="0" x2="-2.54" y2="0" width="0.6096" layer="94"/>
<wire x1="-1.27" y1="2.54" x2="-2.54" y2="2.54" width="0.6096" layer="94"/>
<wire x1="-1.27" y1="-2.54" x2="-2.54" y2="-2.54" width="0.6096" layer="94"/>
<wire x1="-1.27" y1="-5.08" x2="-2.54" y2="-5.08" width="0.6096" layer="94"/>
<wire x1="-1.27" y1="-7.62" x2="-2.54" y2="-7.62" width="0.6096" layer="94"/>
<wire x1="-1.27" y1="-10.16" x2="-2.54" y2="-10.16" width="0.6096" layer="94"/>
<wire x1="-1.27" y1="-12.7" x2="-2.54" y2="-12.7" width="0.6096" layer="94"/>
<wire x1="3.81" y1="-15.24" x2="-3.81" y2="-15.24" width="0.4064" layer="94"/>
<wire x1="1.27" y1="-7.62" x2="2.54" y2="-7.62" width="0.6096" layer="94"/>
<wire x1="1.27" y1="-10.16" x2="2.54" y2="-10.16" width="0.6096" layer="94"/>
<wire x1="1.27" y1="-12.7" x2="2.54" y2="-12.7" width="0.6096" layer="94"/>
<wire x1="3.81" y1="-15.24" x2="3.81" y2="12.7" width="0.4064" layer="94"/>
<wire x1="-3.81" y1="12.7" x2="3.81" y2="12.7" width="0.4064" layer="94"/>
<wire x1="1.27" y1="-2.54" x2="2.54" y2="-2.54" width="0.6096" layer="94"/>
<wire x1="1.27" y1="-5.08" x2="2.54" y2="-5.08" width="0.6096" layer="94"/>
<wire x1="1.27" y1="0" x2="2.54" y2="0" width="0.6096" layer="94"/>
<wire x1="1.27" y1="2.54" x2="2.54" y2="2.54" width="0.6096" layer="94"/>
<wire x1="1.27" y1="5.08" x2="2.54" y2="5.08" width="0.6096" layer="94"/>
<wire x1="1.27" y1="7.62" x2="2.54" y2="7.62" width="0.6096" layer="94"/>
<wire x1="1.27" y1="10.16" x2="2.54" y2="10.16" width="0.6096" layer="94"/>
<text x="-3.81" y="-17.526" size="1.778" layer="96" font="vector">>VALUE</text>
<text x="-3.81" y="13.208" size="1.778" layer="95" font="vector">>NAME</text>
<pin name="1" x="-7.62" y="10.16" visible="pad" length="middle" direction="pas" swaplevel="1"/>
<pin name="2" x="7.62" y="10.16" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
<pin name="3" x="-7.62" y="7.62" visible="pad" length="middle" direction="pas" swaplevel="1"/>
<pin name="4" x="7.62" y="7.62" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
<pin name="5" x="-7.62" y="5.08" visible="pad" length="middle" direction="pas" swaplevel="1"/>
<pin name="6" x="7.62" y="5.08" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
<pin name="7" x="-7.62" y="2.54" visible="pad" length="middle" direction="pas" swaplevel="1"/>
<pin name="8" x="7.62" y="2.54" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
<pin name="9" x="-7.62" y="0" visible="pad" length="middle" direction="pas" swaplevel="1"/>
<pin name="10" x="7.62" y="0" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
<pin name="11" x="-7.62" y="-2.54" visible="pad" length="middle" direction="pas" swaplevel="1"/>
<pin name="12" x="7.62" y="-2.54" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
<pin name="13" x="-7.62" y="-5.08" visible="pad" length="middle" direction="pas" swaplevel="1"/>
<pin name="14" x="7.62" y="-5.08" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
<pin name="15" x="-7.62" y="-7.62" visible="pad" length="middle" direction="pas" swaplevel="1"/>
<pin name="16" x="7.62" y="-7.62" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
<pin name="17" x="-7.62" y="-10.16" visible="pad" length="middle" direction="pas" swaplevel="1"/>
<pin name="18" x="7.62" y="-10.16" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
<pin name="19" x="-7.62" y="-12.7" visible="pad" length="middle" direction="pas" swaplevel="1"/>
<pin name="20" x="7.62" y="-12.7" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
</symbol>
</symbols>
<devicesets>
<deviceset name="M02" prefix="J" uservalue="yes">
<description>Standard 2-pin 0.1" header. Use with

- straight break away headers ( PRT-00116)

- right angle break away headers (PRT-00553)

- swiss pins (PRT-00743)

- machine pins (PRT-00117)

- female headers (PRT-00115)

 Molex polarized connector foot print use with: PRT-08233 with associated crimp pins and housings.

2.54_SCREWTERM for use with  PRT-10571.

3.5mm Screw Terminal footprints for  PRT-08084

5mm Screw Terminal footprints for use with PRT-08432</description>
<gates>
<gate name="G$1" symbol="M02" x="-2.54" y="0"/>
</gates>
<devices>
<device name="PTH" package="1X02@1">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="POLAR" package="MOLEX-1X2@1">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="3.5MM" package="SCREWTERMINAL-3.5MM-2@1">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="CONN-08399" constant="no"/>
</technology>
</technologies>
</device>
<device name="-JST-2MM-SMT" package="JST-2-SMD@1">
<connects>
<connect gate="G$1" pin="1" pad="2"/>
<connect gate="G$1" pin="2" pad="1"/>
</connects>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="CONN-11443"/>
</technology>
</technologies>
</device>
<device name="PTH2" package="1X02_BIG@1">
<connects>
<connect gate="G$1" pin="1" pad="P$1"/>
<connect gate="G$1" pin="2" pad="P$2"/>
</connects>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="4UCON-15767" package="JST-2-SMD-VERT@1">
<connects>
<connect gate="G$1" pin="1" pad="GND"/>
<connect gate="G$1" pin="2" pad="VCC"/>
</connects>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="ROCKER" package="R_SW_TH">
<connects>
<connect gate="G$1" pin="1" pad="P$3"/>
<connect gate="G$1" pin="2" pad="P$4"/>
</connects>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="5MM" package="SCREWTERMINAL-5MM-2@1">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<technologies>
<technology name="">
<attribute name="STOREFRONT_ID" value="PRT-08432" constant="no"/>
</technology>
</technologies>
</device>
<device name="LOCK" package="1X02_LOCK@1">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="POLAR_LOCK" package="MOLEX-1X2_LOCK@1">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="LOCK_LONGPADS" package="1X02_LOCK_LONGPADS@1">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="3.5MM_LOCK" package="SCREWTERMINAL-3.5MM-2_LOCK@1">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="CONN-08399" constant="no"/>
</technology>
</technologies>
</device>
<device name="PTH3" package="1X02_LONGPADS@1">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="1X02_NO_SILK" package="1X02_NO_SILK@1">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="JST-PTH-2" package="JST-2-PTH@1">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="CONN-09863" constant="no"/>
<attribute name="SKU" value="PRT-09914" constant="no"/>
</technology>
</technologies>
</device>
<device name="PTH4" package="1X02_XTRA_BIG@1">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="POGO_PIN_HOLES_ONLY" package="1X02_PP_HOLES_ONLY@1">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="3.5MM-NO_SILK" package="SCREWTERMINAL-3.5MM-2-NS@1">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="CONN-08399" constant="no"/>
</technology>
</technologies>
</device>
<device name="-JST-2-PTH-NO_SILK" package="JST-2-PTH-NS@1">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="JST-PTH-2-KIT" package="JST-2-PTH-KIT@1">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="SPRING-2.54-RA" package="SPRINGTERMINAL-2.54MM-2@1">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="2.54MM_SCREWTERM" package="1X02_2.54_SCREWTERM@1">
<connects>
<connect gate="G$1" pin="1" pad="P1"/>
<connect gate="G$1" pin="2" pad="P2"/>
</connects>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="JST-PTH-VERT" package="JST-2-PTH-VERT">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="SMALL_POKEHOME" package="1X02_POKEHOME">
<connects>
<connect gate="G$1" pin="1" pad="P1 P3"/>
<connect gate="G$1" pin="2" pad="P2 P4"/>
</connects>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="CONN-13512"/>
</technology>
</technologies>
</device>
</devices>
</deviceset>
<deviceset name="M04" prefix="J" uservalue="yes">
<description>Header 4
Standard 4-pin 0.1" header. Use with straight break away headers (SKU : PRT-00116), right angle break away headers (PRT-00553), swiss pins (PRT-00743), machine pins (PRT-00117), and female headers (PRT-00115). Molex polarized connector foot print use with SKU : PRT-08231 with associated crimp pins and housings. 1MM SMD Version SKU: PRT-10208</description>
<gates>
<gate name="G$1" symbol="M04" x="-2.54" y="0"/>
</gates>
<devices>
<device name="PTH" package="1X04">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
<connect gate="G$1" pin="3" pad="3"/>
<connect gate="G$1" pin="4" pad="4"/>
</connects>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="CONN-09696" constant="no"/>
</technology>
</technologies>
</device>
<device name="POLAR" package="MOLEX-1X4">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
<connect gate="G$1" pin="3" pad="3"/>
<connect gate="G$1" pin="4" pad="4"/>
</connects>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="SCREW" package="SCREWTERMINAL-3.5MM-4">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
<connect gate="G$1" pin="3" pad="3"/>
<connect gate="G$1" pin="4" pad="4"/>
</connects>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="Combine 2x8399" constant="no"/>
</technology>
</technologies>
</device>
<device name="1.27MM" package="1X04-1.27MM">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
<connect gate="G$1" pin="3" pad="3"/>
<connect gate="G$1" pin="4" pad="4"/>
</connects>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="LOCK" package="1X04_LOCK">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
<connect gate="G$1" pin="3" pad="3"/>
<connect gate="G$1" pin="4" pad="4"/>
</connects>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="CONN-09696" constant="no"/>
</technology>
</technologies>
</device>
<device name="LOCK_LONGPADS" package="1X04_LOCK_LONGPADS">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
<connect gate="G$1" pin="3" pad="3"/>
<connect gate="G$1" pin="4" pad="4"/>
</connects>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="CONN-09696" constant="no"/>
</technology>
</technologies>
</device>
<device name="POLAR_LOCK" package="MOLEX-1X4_LOCK">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
<connect gate="G$1" pin="3" pad="3"/>
<connect gate="G$1" pin="4" pad="4"/>
</connects>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="SMD" package="1X04-SMD">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
<connect gate="G$1" pin="3" pad="3"/>
<connect gate="G$1" pin="4" pad="4"/>
</connects>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="LONGPADS" package="1X04_LONGPADS">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
<connect gate="G$1" pin="3" pad="3"/>
<connect gate="G$1" pin="4" pad="4"/>
</connects>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="CONN-09696" constant="no"/>
</technology>
</technologies>
</device>
<device name="1X04_NO_SILK" package="1X04_NO_SILK">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
<connect gate="G$1" pin="3" pad="3"/>
<connect gate="G$1" pin="4" pad="4"/>
</connects>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="CONN-09696" constant="no"/>
</technology>
</technologies>
</device>
<device name="JST-PTH" package="JST-4-PTH">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
<connect gate="G$1" pin="3" pad="3"/>
<connect gate="G$1" pin="4" pad="4"/>
</connects>
<technologies>
<technology name="">
<attribute name="SKU" value="PRT-09916" constant="no"/>
</technology>
</technologies>
</device>
<device name="SCREW_LOCK" package="SCREWTERMINAL-3.5MM-4_LOCK">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
<connect gate="G$1" pin="3" pad="3"/>
<connect gate="G$1" pin="4" pad="4"/>
</connects>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="SMD2" package="1X04-1MM-RA">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
<connect gate="G$1" pin="3" pad="3"/>
<connect gate="G$1" pin="4" pad="4"/>
</connects>
<technologies>
<technology name=""/>
</technologies

license: MIT

repository: benlhy/DC-motor-control

license_type: permissive

repo_name: benlhy/DC-motor-control

branch_name: refs/heads/master

extension: sch