Daily Papers

Reinforcement learning (RL) is a powerful framework for optimizing decision-making in complex systems under uncertainty, an essential challenge in real-world settings, particularly in the context of the energy transition. A representative example is remote microgrids that supply power to communities disconnected from the main grid. Enabling the energy transition in such systems requires coordinated control of renewable sources like wind turbines, alongside fuel generators and batteries, to meet demand while minimizing fuel consumption and battery degradation under exogenous and intermittent load and wind conditions. These systems must often conform to extensive regulations and complex operational constraints. To ensure that RL agents respect these constraints, it is crucial to provide interpretable guarantees. In this paper, we introduce Shielded Controller Units (SCUs), a systematic and interpretable approach that leverages prior knowledge of system dynamics to ensure constraint satisfaction. Our shield synthesis methodology, designed for real-world deployment, decomposes the environment into a hierarchical structure where each SCU explicitly manages a subset of constraints. We demonstrate the effectiveness of SCUs on a remote microgrid optimization task with strict operational requirements. The RL agent, equipped with SCUs, achieves a 24% reduction in fuel consumption without increasing battery degradation, outperforming other baselines while satisfying all constraints. We hope SCUs contribute to the safe application of RL to the many decision-making challenges linked to the energy transition.

This paper develops a graph reinforcement learning approach to online planning of the schedule and destinations of electric aircraft that comprise an urban air mobility (UAM) fleet operating across multiple vertiports. This fleet scheduling problem is formulated to consider time-varying demand, constraints related to vertiport capacity, aircraft capacity and airspace safety guidelines, uncertainties related to take-off delay, weather-induced route closures, and unanticipated aircraft downtime. Collectively, such a formulation presents greater complexity, and potentially increased realism, than in existing UAM fleet planning implementations. To address these complexities, a new policy architecture is constructed, primary components of which include: graph capsule conv-nets for encoding vertiport and aircraft-fleet states both abstracted as graphs; transformer layers encoding time series information on demand and passenger fare; and a Multi-head Attention-based decoder that uses the encoded information to compute the probability of selecting each available destination for an aircraft. Trained with Proximal Policy Optimization, this policy architecture shows significantly better performance in terms of daily averaged profits on unseen test scenarios involving 8 vertiports and 40 aircraft, when compared to a random baseline and genetic algorithm-derived optimal solutions, while being nearly 1000 times faster in execution than the latter.

Multi-agent systems built on large language models (LLMs) require many coordination choices that are difficult to fix a priori: which skill protocol to invoke, which agent role should perform a subtask, which model to bind to each role, how roles should interact, when to use retrieval or verification, and when to omit a step entirely. These choices interact with task regime and operational constraints, so static pipelines and one-off model comparisons provide only a limited view of the design space. This paper introduces AgensFlow, an open-source framework that treats multi-agent coordination as an online policy-learning problem under partial observability. The framework makes coordination decisions observable and learnable from repeated trajectories, rather than treating skill, role, model, topology, and evaluation choices as fixed pipeline design. AgensFlow is evaluated on two corpora: distributed-systems incident tasks and security-advisory tasks. The evaluation shows three main results: learned routing reaches a higher-quality operating point than a fixed pipeline baseline on coordination-heavy classes; skip:X isolates topology compression as a meaningful part of the substrate; and warm-started policy graphs can reduce exploration cost while preserving plateau quality. Overall, the results support that learned, auditable routing can improve coordination-heavy multi-agent workflows over static wiring.

Large language model (LLM) agents coordinate complex tasks through multi-role and multi-stage workflows. Upstream state is repeatedly transformed into intermediate language artifacts, such as summaries, plans, tickets, memories, and handoff notes, from which downstream components act. For action-constraining state, topical retention is insufficient: an artifact may mention an unresolved condition while changing it from a requirement that must be resolved before execution into information that may merely inform the next action. We study this action-binding role as operational state preservation. Safety blockers provide a controlled instance because each source state has an explicit prerequisite, authority, fallback, and execution consequence. We condition on correct upstream identification, vary the handoff transformation, and evaluate an executor restricted to the resulting artifact. Across 1,296 controlled synthetic episodes, direct-handoff controls preserve every blocker, whereas compression, plan assimilation, convergence, ownership deferral, and precedent substitution repeatedly turn binding state into caveats or non-binding considerations. Normal handoff compression produces 100.0% deactivation and 54.2% forbidden action. Restoring all four state fields raises preservation to 100.0% and reduces forbidden action to 0.0%. Fixed-artifact interventions further separate preservation from containment: downstream verification eliminates forbidden action while artifact deactivation remains 95.3%. These results identify a state-transmission failure between information extraction and action. Handoff transformations can retain state content while weakening its constraints on downstream action. Semantic availability does not guarantee operational preservation.

Developing embodied AI for intelligent surgical systems requires safe, controllable environments for continual learning and evaluation. However, safety regulations and operational constraints in operating rooms (ORs) limit embodied agents from freely perceiving and interacting in realistic settings. Digital twins provide high-fidelity, risk-free environments for exploration and training. How we may create photorealistic and dynamic digital representations of ORs that capture relevant spatial, visual, and behavioral complexity remains unclear. We introduce TwinOR, a framework for constructing photorealistic, dynamic digital twins of ORs for embodied AI research. The system reconstructs static geometry from pre-scan videos and continuously models human and equipment motion through multi-view perception of OR activities. The static and dynamic components are fused into an immersive 3D environment that supports controllable simulation and embodied exploration. The proposed framework reconstructs complete OR geometry with centimeter level accuracy while preserving dynamic interaction across surgical workflows, enabling realistic renderings and a virtual playground for embodied AI systems. In our experiments, TwinOR simulates stereo and monocular sensor streams for geometry understanding and visual localization tasks. Models such as FoundationStereo and ORB-SLAM3 on TwinOR-synthesized data achieve performance within their reported accuracy on real indoor datasets, demonstrating that TwinOR provides sensor-level realism sufficient for perception and localization challenges. By establishing a real-to-sim pipeline for constructing dynamic, photorealistic digital twins of OR environments, TwinOR enables the safe, scalable, and data-efficient development and benchmarking of embodied AI, ultimately accelerating the deployment of embodied AI from sim-to-real.

Scoring systems are linear classification models that only require users to add, subtract and multiply a few small numbers in order to make a prediction. These models are in widespread use by the medical community, but are difficult to learn from data because they need to be accurate and sparse, have coprime integer coefficients, and satisfy multiple operational constraints. We present a new method for creating data-driven scoring systems called a Supersparse Linear Integer Model (SLIM). SLIM scoring systems are built by solving an integer program that directly encodes measures of accuracy (the 0-1 loss) and sparsity (the ell_0-seminorm) while restricting coefficients to coprime integers. SLIM can seamlessly incorporate a wide range of operational constraints related to accuracy and sparsity, and can produce highly tailored models without parameter tuning. We provide bounds on the testing and training accuracy of SLIM scoring systems, and present a new data reduction technique that can improve scalability by eliminating a portion of the training data beforehand. Our paper includes results from a collaboration with the Massachusetts General Hospital Sleep Laboratory, where SLIM was used to create a highly tailored scoring system for sleep apnea screening

Multi-modal classification leverages complementary information across diverse data sources to enhance predictive performance. However, real-world scenarios subject to operational constraints, such as sensor failures or privacy restrictions, lead to inconsistent modality availability between training and inference times. To handle missing modalities, prior studies have mainly covered bimodal data setups and focused on designing robust fusion processes. Instead, we adopt a multi-modal co-learning framework that prioritizes inter-modal collaboration rather than multi-modal fusion. Specifically, we consider that any subset of modalities may be absent, without assuming predefined missing-modality patterns, an inference scenario we refer to as missing arbitrary modalities. To address this challenge, we introduce two alternative approaches that leverage information at both feature- and decision-level. Experiments on two multi-modal classification benchmarks demonstrate significant robustness gains in various missing modality conditions. The first method shows more robust behavior under minimal missing conditions, where a single modality is absent, whereas the second performs better under extreme missing conditions, where all-but-one modalities are missing. Our code is available at https://github.com/fmenat/Co4Miss.

Retrieval Augmented Generation (RAG) enables Large Language Models (LLMs) to generalize to new information by decoupling reasoning capabilities from static knowledge bases. Traditional RAG enhancements have explored vertical scaling -- assigning subtasks to specialized modules -- and horizontal scaling -- replicating tasks across multiple agents -- to improve performance. However, real-world applications impose diverse Service Level Agreements (SLAs) and Quality of Service (QoS) requirements, involving trade-offs among objectives such as reducing cost, ensuring answer quality, and adhering to specific operational constraints. In this work, we present a systems-oriented approach to multi-agent RAG tailored for real-world Question Answering (QA) applications. By integrating task-specific non-functional requirements -- such as answer quality, cost, and latency -- into the system, we enable dynamic reconfiguration to meet diverse SLAs. Our method maps these Service Level Objectives (SLOs) to system-level parameters, allowing the generation of optimal results within specified resource constraints. We conduct a case study in the QA domain, demonstrating how dynamic re-orchestration of a multi-agent RAG system can effectively manage the trade-off between answer quality and cost. By adjusting the system based on query intent and operational conditions, we systematically balance performance and resource utilization. This approach allows the system to meet SLOs for various query types, showcasing its practicality for real-world applications.

Natural disaster monitoring through continuous satellite observation requires processing multi-temporal data under strict operational constraints. This paper addresses flood detection, a critical application for hazard management, by developing an onboard change detection system that operates within the memory and computational limits of small satellites. We propose History Injection mechanism for Transformer models (HiT), that maintains historical context from previous observations while reducing data storage by over 99\% of original image size. Moreover, testing on the STTORM-CD flood dataset confirms that the HiT mechanism within the Prithvi-tiny foundation model maintains detection accuracy compared to the bi-temporal baseline. The proposed HiT-Prithvi model achieved 43 FPS on Jetson Orin Nano, a representative onboard hardware used in nanosats. This work establishes a practical framework for satellite-based continuous monitoring of natural disasters, supporting real-time hazard assessment without dependency on ground-based processing infrastructure. Architecture as well as model checkpoints is available at https://github.com/zaitra/HiT-change-detection .

Deep reinforcement learning agents often exhibit erratic, high-frequency control behaviors that hinder real-world deployment due to excessive energy consumption and mechanical wear. We systematically investigate action smoothness regularization through higher-order derivative penalties, progressing from theoretical understanding in continuous control benchmarks to practical validation in building energy management. Our comprehensive evaluation across four continuous control environments demonstrates that third-order derivative penalties (jerk minimization) consistently achieve superior smoothness while maintaining competitive performance. We extend these findings to HVAC control systems where smooth policies reduce equipment switching by 60%, translating to significant operational benefits. Our work establishes higher-order action regularization as an effective bridge between RL optimization and operational constraints in energy-critical applications.

Reinforcement learning (RL) can provide adaptive and scalable controllers essential for power grid decarbonization. However, RL methods struggle with power grids' complex dynamics, long-horizon goals, and hard physical constraints. For these reasons, we present RL2Grid, a benchmark designed in collaboration with power system operators to accelerate progress in grid control and foster RL maturity. Built on RTE France's power simulation framework, RL2Grid standardizes tasks, state and action spaces, and reward structures for a systematic evaluation and comparison of RL algorithms. Moreover, we integrate operational heuristics and design safety constraints based on human expertise to ensure alignment with physical requirements. By establishing reference performance metrics for classic RL baselines on RL2Grid's tasks, we highlight the need for novel methods capable of handling real systems and discuss future directions for RL-based grid control.

Modern large-scale ranking systems operate within a sophisticated landscape of competing objectives, operational constraints, and evolving product requirements. Progress in this domain is increasingly bottlenecked by the engineering context constraint: the arduous process of translating ambiguous product intent into reasonable, executable, verifiable hypotheses, rather than by modeling techniques alone. We present GEARS (Generative Engine for Agentic Ranking Systems), a framework that reframes ranking optimization as an autonomous discovery process within a programmable experimentation environment. Rather than treating optimization as static model selection, GEARS leverages Specialized Agent Skills to encapsulate ranking expert knowledge into reusable reasoning capabilities, enabling operators to steer systems via high-level intent vibe personalization. Furthermore, to ensure production reliability, the framework incorporates validation hooks to enforce statistical robustness and filter out brittle policies that overfit short-term signals. Experimental validation across diverse product surfaces demonstrates that GEARS consistently identifies superior, near-Pareto-efficient policies by synergizing algorithmic signals with deep ranking context while maintaining rigorous deployment stability.

We present Federation of Agents (FoA), a distributed orchestration framework that transforms static multi-agent coordination into dynamic, capability-driven collaboration. FoA introduces Versioned Capability Vectors (VCVs): machine-readable profiles that make agent capabilities searchable through semantic embeddings, enabling agents to advertise their capabilities, cost, and limitations. Our aarchitecturecombines three key innovations: (1) semantic routing that matches tasks to agents over sharded HNSW indices while enforcing operational constraints through cost-biased optimization, (2) dynamic task decomposition where compatible agents collaboratively break down complex tasks into DAGs of subtasks through consensus-based merging, and (3) smart clustering that groups agents working on similar subtasks into collaborative channels for k-round refinement before synthesis. Built on top of MQTT,s publish-subscribe semantics for scalable message passing, FoA achieves sub-linear complexity through hierarchical capability matching and efficient index maintenance. Evaluation on HealthBench shows 13x improvements over single-model baselines, with clustering-enhanced laboration particularly effective for complex reasoning tasks requiring multiple perspectives. The system scales horizontally while maintaining consistent performance, demonstrating that semantic orchestration with structured collaboration can unlock the collective intelligence of heterogeneous federations of AI agents.

One of the most important challenges for improving personalized services in industries like tourism is predicting users' near-future movements based on prior behavior and current circumstances. Next POI (Point of Interest) recommendation is essential for helping users and service providers by providing personalized recommendations. The intricacy of this work, however, stems from the requirement to take into consideration several variables at once, such as user preferences, time contexts, and geographic locations. POI selection is also greatly influenced by elements like a POI's operational status during desired visit times, desirability for visiting during particular seasons, and its dynamic popularity over time. POI popularity is mostly determined by check-in frequency in recent studies, ignoring visitor volumes, operational constraints, and temporal dynamics. These restrictions result in recommendations that are less than ideal and do not take into account actual circumstances. We propose the Seasonal and Active hours-guided Graph-Enhanced Transformer (SEAGET) model as a solution to these problems. By integrating variations in the seasons, operational status, and temporal dynamics into a graph-enhanced transformer framework, SEAGET capitalizes on redefined POI popularity. This invention gives more accurate and context-aware next POI predictions, with potential applications for optimizing tourist experiences and enhancing location-based services in the tourism industry.

Effective scheduling under tight resource, timing, and operational constraints underpins large-scale planning across sectors such as capital projects, manufacturing, logistics, and IT fleet transitions. However, the reliability of large language models (LLMs) when reasoning under high-constraint regimes is insufficiently characterized. To address this gap, we present R-ConstraintBench, a scalable framework that evaluates models on Resource-Constrained Project Scheduling Problems (RCPSP), an NP-Complete feasibility class, while difficulty increases via linear growth in constraints. R-ConstraintBench incrementally increases non-redundant precedence constraints in Directed Acyclic Graphs (DAGs) and then introduces downtime, temporal windows, and disjunctive constraints. As an illustrative example, we instantiate the benchmark in a data center migration setting and evaluate multiple LLMs using feasibility and error analysis, identifying degradation thresholds and constraint types most associated with failure. Empirically, strong models are near-ceiling on precedence-only DAGs, but feasibility performance collapses when downtime, temporal windows, and disjunctive constraints interact, implicating constraint interaction, not graph depth, as the principal bottleneck. Performance on clean synthetic ramps also does not guarantee transfer to domain-grounded scenarios, underscoring limited generalization.

The rapid growth of large language models (LLMs) with diverse capabilities, costs, and domains has created a critical need for intelligent model selection at inference time. While smaller models suffice for routine queries, complex tasks demand more capable models. However, static model deployment does not account for the complexity and domain of incoming queries, leading to suboptimal performance and increased costs. Dynamic routing systems that adaptively select models based on query characteristics have emerged as a solution to this challenge. We provide a systematic analysis of state-of-the-art multi-LLM routing and cascading approaches. In contrast to mixture-of-experts architectures, which route within a single model, we study routing across multiple independently trained LLMs. We cover diverse routing paradigms, including query difficulty, human preferences, clustering, uncertainty quantification, reinforcement learning, multimodality, and cascading. For each paradigm, we analyze representative methods and examine key trade-offs. Beyond taxonomy, we introduce a conceptual framework that characterizes routing systems along three dimensions: when decisions are made, what information is used, and how they are computed. This perspective highlights that practical systems are often compositional, integrating multiple paradigms under operational constraints. Our analysis demonstrates that effective multi-LLM routing requires balancing competing objectives. Choosing the optimal routing strategy depends on deployment and computational constraints. Well-designed routing systems can outperform even the most powerful individual models by strategically leveraging specialized capabilities across models while maximizing efficiency gains. Meanwhile, open challenges remain in developing routing mechanisms that generalize across diverse architectures, modalities, and applications.

Multimodal large language models (MLLMs) have demonstrated promising prospects in healthcare, particularly for addressing complex medical tasks, supporting multidisciplinary treatment (MDT), and enabling personalized precision medicine. However, their practical deployment faces critical challenges in resource efficiency, diagnostic accuracy, clinical considerations, and ethical privacy. To address these limitations, we propose Infi-Med, a comprehensive framework for medical MLLMs that introduces three key innovations: (1) a resource-efficient approach through curating and constructing high-quality supervised fine-tuning (SFT) datasets with minimal sample requirements, with a forward-looking design that extends to both pretraining and posttraining phases; (2) enhanced multimodal reasoning capabilities for cross-modal integration and clinical task understanding; and (3) a systematic evaluation system that assesses model performance across medical modalities and task types. Our experiments demonstrate that Infi-Med achieves state-of-the-art (SOTA) performance in general medical reasoning while maintaining rapid adaptability to clinical scenarios. The framework establishes a solid foundation for deploying MLLMs in real-world healthcare settings by balancing model effectiveness with operational constraints.

This paper presents a critical and practical approach to the evolution of distribution network reconfiguration algorithms, tracing their development from foundational heuristic methods introduced in 1975 to contemporary state-of-the-art techniques. The article systematically reviews seven different methodologies, including classical heuristic algorithms (Merlin, Baran, and others), advanced meta-heuristic methodologies (particle swarm optimization (PSO) and genetic algorithms), and purely mathematical approaches (MILP-based), analyzing their theoretical foundations, implementation strategies, computational complexity, and performance metrics based on extensive literature review and our own empirical testing. Each methodology is assessed through standardized test systems, considering multiple objectives such as power loss minimization and voltage profile improvement. The comparative analysis reveals the strengths and limitations of each approach under various network conditions and operational constraints. Furthermore, this work provides significant value to the research community by offering an open-source repository containing documented implementations of all reviewed algorithms. This resource facilitates accessibility for newcomers to the field, promotes reproducible research, and accelerates the development of next-generation distribution network optimization solutions. The repository includes comprehensive documentation, test cases, and performance benchmarks.

This paper addresses the fundamental problem of non-uniform area coverage in multi-agent systems, where different regions require varying levels of attention due to mission-dependent priorities. Existing uniform coverage strategies are insufficient for realistic applications, and many non-uniform approaches either lack optimality guarantees or fail to incorporate crucial real-world constraints such as agent dynamics, limited operation time, the number of agents, and decentralized execution. To resolve these limitations, we propose a novel framework called Density-Driven Optimal Control (D2OC). The central idea of D2OC is the integration of optimal transport theory with multi-agent coverage control, enabling each agent to continuously adjust its trajectory to match a mission-specific reference density map. The proposed formulation establishes optimality by solving a constrained optimization problem that explicitly incorporates physical and operational constraints. The resulting control input is analytically derived from the Lagrangian of the objective function, yielding closed-form optimal solutions for linear systems and a generalizable structure for nonlinear systems. Furthermore, a decentralized data-sharing mechanism is developed to coordinate agents without reliance on global information. Comprehensive simulation studies demonstrate that D2OC achieves significantly improved non-uniform area coverage performance compared to existing methods, while maintaining scalability and decentralized implementability.

Power distribution networks are evolving due to the integration of DERs and increased customer participation. To maintain optimal operation, minimize losses, and meet varying load demands, frequent network reconfiguration is necessary. Traditionally, the reconfiguration task relies on optimization software and expert operators, but as systems grow more complex, faster and more adaptive solutions are required without expert intervention. Data-driven reconfiguration is gaining traction for its accuracy, speed, and robustness against incomplete network data. LLMs, with their ability to capture complex patterns, offer a promising approach for efficient and responsive network reconfiguration in evolving complex power networks. In this work, we introduce LLM4DistReconfig, a deep learning-based approach utilizing a fine-tuned LLM to solve the distribution network reconfiguration problem. By carefully crafting prompts and designing a custom loss function, we train the LLM with inputs representing network parameters such as buses, available lines, open lines, node voltages, and system loss. The model then predicts optimal reconfigurations by outputting updated network configurations that minimize system loss while meeting operational constraints. Our approach significantly reduces inference time compared to classical algorithms, allowing for near real-time optimal reconfiguration after training. Experimental results show that our method generates optimal configurations minimizing system loss for five individual and a combined test dataset. It also produces minimal invalid edges, no cycles, or subgraphs across all datasets, fulfilling domain-specific needs. Additionally, the generated responses contain less than 5% improper outputs on seen networks and satisfactory results on unseen networks, demonstrating its effectiveness and reliability for the reconfiguration task.

As large language model (LLM)-based agents increasingly participate in online discourse, red-teaming their capacity to support political influence campaigns is critical for information integrity. In pursuit of this goal, we focus on locally deployed open-source LLMs, as opposed to frontier API-only models, given their superior alignment with the operational constraints of privacy-conscious malicious actors deployed in social media environments. We introduce an empirical red-teaming framework for measuring LLM Overton Windows (OWs), defined as the range of political opinions a model can reliably express on controversial topics, and for quantifying how simple natural-language jailbreaks expand that range. We evaluate more than 30 LLMs spanning 10 model families and five countries of origin. We find systematic asymmetries in political expressivity: open-source LLMs are typically more willing to generate left-leaning social media content, OWs tend to contract inversely to model size, and regional differences are substantial despite uneven representation in the open-source ecosystem. Jailbreak potency also varies sharply across model families, motivating a workflow for identifying effective combinations of jailbreak techniques. Taken together, our results establish a practical framework for auditing the political steerability of open-source LLMs and for helping future researchers design stronger countermeasures against LLM-enabled influence campaigns.

Executable evaluation -- checking the consequences of an agent's actions with a program rather than grading its prose -- has become a prominent way to assess tool-using AI agents in software settings. Electric power engineering has not yet had an analogous benchmark: language-model use is still dominated by retrieval and text question answering, while agents acting on power-system artifacts remain mostly academic prototypes. We introduce the Power Systems Agent Benchmark, an executable benchmark for power-engineering agents. An agent receives a structured task and returns a structured solution; a deterministic evaluator recomputes the engineering quantities, checks operational constraints, and returns a feasibility flag, a normalized score, and explicit violations. The benchmark contains 41 task families across eight areas of power engineering, from power flow and protection to stability, microgrids, reliability, power quality, and forecasting. Each task is grounded in a citable source, standard, or documented engineering formulation. To resist contamination, held-out cases are synthesized on demand by per-family generators from private seeds: the construction is inspectable, but the instances remain private. In a reference evaluation with three command-line agents, the strongest score near the compact tier's ceiling, a smaller open model trails, and public and held-out performance are broadly consistent; a separate public-split grid with OpenCode and Aider probes harness effects. The reference evaluation doubles as quality control: unanimous failures flag candidate task or evaluator defects, and it exposed a latent evaluator bug missed by self-consistency checks. The evaluators are compact deterministic surrogates, but the task contract allows their internals to be upgraded to simulator-backed checks without changing how tasks are posed or solved.

Robotic instruction following tasks require seamless integration of visual perception, task planning, target localization, and motion execution. However, existing task planning methods for instruction following are either data-driven or underperform in zero-shot scenarios due to difficulties in grounding lengthy instructions into actionable plans under operational constraints. To address this, we propose FlowPlan, a structured multi-stage LLM workflow that elevates zero-shot pipeline and bridges the performance gap between zero-shot and data-driven in-context learning methods. By decomposing the planning process into modular stages--task information retrieval, language-level reasoning, symbolic-level planning, and logical evaluation--FlowPlan generates logically coherent action sequences while adhering to operational constraints and further extracts contextual guidance for precise instance-level target localization. Benchmarked on the ALFRED and validated in real-world applications, our method achieves competitive performance relative to data-driven in-context learning methods and demonstrates adaptability across diverse environments. This work advances zero-shot task planning in robotic systems without reliance on labeled data. Project website: https://instruction-following-project.github.io/.

This paper introduces Opus, a novel framework for generating and optimizing Workflows tailored to complex Business Process Outsourcing (BPO) use cases, focusing on cost reduction and quality enhancement while adhering to established industry processes and operational constraints. Our approach generates executable Workflows from Intention, defined as the alignment of Client Input, Client Output, and Process Context. These Workflows are represented as Directed Acyclic Graphs (DAGs), with nodes as Tasks consisting of sequences of executable Instructions, including tools and human expert reviews. We adopt a two-phase methodology: Workflow Generation and Workflow Optimization. In the Generation phase, Workflows are generated using a Large Work Model (LWM) informed by a Work Knowledge Graph (WKG) that encodes domain-specific procedural and operational knowledge. In the Optimization phase, Workflows are transformed into Workflow Graphs (WFGs), where optimal Workflows are determined through path optimization. Our experiments demonstrate that state-of-the-art Large Language Models (LLMs) face challenges in reliably retrieving detailed process data as well as generating industry-compliant workflows. The key contributions of this paper include: - The integration of a Work Knowledge Graph (WKG) into a Large Work Model (LWM), enabling the generation of context-aware, semantically aligned, structured and auditable Workflows. - A two-phase approach that combines Workflow Generation from Intention with graph-based Workflow Optimization. - Opus Alpha 1 Large and Opus Alpha 1 Small, models that outperform state-of-the-art LLMs by 38\% and 29\% respectively in Workflow Generation for a Medical Coding use case.

Small and Medium Enterprises (SMEs), particularly freelancers and early-stage businesses, face unique financial management challenges due to limited resources, small customer bases, and constrained data availability. This paper presents the development and deployment of an integrated financial prediction system that combines accounts receivable prediction and cash flow forecasting specifically designed for SME operational constraints. Our system addresses the gap between enterprise-focused financial tools and the practical needs of freelancers and small businesses. The solution integrates two key components: a binary classification model for predicting invoice payment delays, and a multi-module cash flow forecasting model that handles incomplete and limited historical data. A prototype system has been implemented and deployed as a web application with integration into Cluee's platform, a startup providing financial management tools for freelancers, demonstrating practical feasibility for real-world SME financial management.

Accurate power load forecasting is essential for the efficient operation and planning of electrical grids, particularly given the increased variability and complexity introduced by renewable energy sources. This paper introduces GAT-LSTM, a hybrid model that combines Graph Attention Networks (GAT) and Long Short-Term Memory (LSTM) networks. A key innovation of the model is the incorporation of edge attributes, such as line capacities and efficiencies, into the attention mechanism, enabling it to dynamically capture spatial relationships grounded in grid-specific physical and operational constraints. Additionally, by employing an early fusion of spatial graph embeddings and temporal sequence features, the model effectively learns and predicts complex interactions between spatial dependencies and temporal patterns, providing a realistic representation of the dynamics of power grids. Experimental evaluations on the Brazilian Electricity System dataset demonstrate that the GAT-LSTM model significantly outperforms state-of-the-art models, achieving reductions of 21. 8% in MAE, 15. 9% in RMSE and 20. 2% in MAPE. These results underscore the robustness and adaptability of the GAT-LSTM model, establishing it as a powerful tool for applications in grid management and energy planning.

Risk scores are simple classification models that let users make quick risk predictions by adding and subtracting a few small numbers. These models are widely used in medicine and criminal justice, but are difficult to learn from data because they need to be calibrated, sparse, use small integer coefficients, and obey application-specific operational constraints. In this paper, we present a new machine learning approach to learn risk scores. We formulate the risk score problem as a mixed integer nonlinear program, and present a cutting plane algorithm for non-convex settings to efficiently recover its optimal solution. We improve our algorithm with specialized techniques to generate feasible solutions, narrow the optimality gap, and reduce data-related computation. Our approach can fit risk scores in a way that scales linearly in the number of samples, provides a certificate of optimality, and obeys real-world constraints without parameter tuning or post-processing. We benchmark the performance benefits of this approach through an extensive set of numerical experiments, comparing to risk scores built using heuristic approaches. We also discuss its practical benefits through a real-world application where we build a customized risk score for ICU seizure prediction in collaboration with the Massachusetts General Hospital.

This study focuses on operational control strategies for a multi-energy District Heating Network (DHN). Two control strategies are investigated and compared: (i) a reactive rule-based control (RBC) and (ii) a model predictive control (MPC). For the purpose of the study a small scale district heating network is modelled using Modelica. The production plant combines a heat pump, a gas boiler and a thermal solar field on the production side with a storage tank for flexibility purposes. On the consumption side, the virtual buildings are aggregated into a single consumer. We use our co-simulation and control platform, called Pegase, to implement the studied strategies. For both strategies the goal is to meet the consumers' demand while satisfying technical constraints. In addition MPC has the objective to minimize the operational costs, taking into account variable electricity prices and availability of solar thermal resource. Different scenarios are also defined and compared to study the effect of the heat plant sizing and forecasting error. The operational cost is reduced when switching from RBC to a MPC. As can be expected, MPC is more efficient when dealing with variable energy costs, intermittent solar energy and storage capabilities. This study also demonstrates how our tools enable an easy coupling of Modelica-based simulation with various control strategies. It especially supports the implementation and validation of complex MPC strategies in an efficient way, and yearly simulations are performed within 20 minutes.

Understanding and anticipating vulnerability-related activity is a major challenge in cyber threat intelligence. This work investigates whether vulnerability sightings, such as proof-of-concept releases, detection templates, or online discussions, can be forecast over time. Building on our earlier work on VLAI, a transformer-based model that predicts vulnerability severity from textual descriptions, we examine whether severity scores can improve time-series forecasting as exogenous variables. We evaluate several approaches for short-term forecasting of sightings per vulnerability. First, we test SARIMAX models with and without log(x+1) transformations and VLAI-derived severity inputs. Although these adjustments provide limited improvements, SARIMAX remains poorly suited to sparse, short, and bursty vulnerability data. In practice, forecasts often produce overly wide confidence intervals and sometimes unrealistic negative values. To better capture the discrete and event-driven nature of sightings, we then explore count-based methods such as Poisson regression. Early results show that these models produce more stable and interpretable forecasts, especially when sightings are aggregated weekly. We also discuss simpler operational alternatives, including exponential decay functions for short forecasting horizons, to estimate future activity without requiring long historical series. Overall, this study highlights both the potential and the limitations of forecasting rare and bursty cyber events, and provides practical guidance for integrating predictive analytics into vulnerability intelligence workflows.

The rate-distortion-perception (RDP) trade-off extends classical rate--distortion theory by imposing a distributional constraint on reconstructions, providing a unified framework for neural image compression that jointly governs fidelity and perceptual realism. While prior work achieves near-optimal rate--perception trade-offs, practical frameworks explicitly realizing the full RDP surface remain scarce, primarily due to the difficulty of introducing common randomness at the decoder. We propose DCIC (Dual-Constrained Diffusion Image Compression), which integrates a learned codec with a diffusion-based decoder governed by joint distortion and idempotence constraints. The distortion constraint bounds reconstruction fidelity relative to the base codec output; the idempotence constraint -- requiring that re-encoding the restored image recovers the base codec reconstruction -- serves as a tractable surrogate for the distributional perception requirement. Together, they steer the reverse denoising process via iterative optimization with consistent noise injection, realizing common randomness without additional rate overhead. At fixed rate, dual attenuation factors (K_D, K_P) jointly navigate the Pareto frontier of the distortion-perception plane, enabling continuously adjustable fidelity-realism trade-offs from a single bitstream. DCIC_{RD} (K_P{=}0) and DCIC_{RP} (K_D{=}0) arise as boundary curves, with DCIC_{RDP} (K_D = K_P=1) realizing the optimal interior operating point. Experiments on CelebA-HQ, CLIC2020, and ImageNet-1K across CNN, Transformer, and hybrid architectures confirm that DCIC_{RDP} achieves superior BD-PSNR over all perceptual codecs, while DCIC_{RP} matches dedicated perception-oriented methods in BD-FID, validating the practical value of full RDP surface navigation.

MOLOT (Malicious Operational Logic Observation Transformer) is a static malicious-code detection system designed for SAST setup where package metadata, maintainer history, and dynamic execution traces may be unavailable or unreliable. The system represents source code as behavior sequences derived from static call graphs, includes an explanation stage that ranks suspicious behavior activities and maps them back to source-code locations. The approach is evaluated on Python and JavaScript packages from PyPI and npm, compared with opensource detection tools, and validated under product constraints including runtime, memory use, and false-positive rates observed in a real moderation workflow. We also release Open Malicious-Code Bench, a public benchmark for reproducible evaluation of malicious-package detection methods. The results show that static behavior-sequence modeling can provide accurate, explainable, and deployable malicious-code detection for modern DevSecOps workflows.

Recent advances in agentic systems increasingly treat code as an executable operational substrate rather than as a disposable output artifact. Prior work such as Code as Agent Harness frames validated agent-generated artifacts as runtime entities that can be created, executed, revised, persisted, and reused within long-running cognitive loops. However, the governance, lifecycle management, and operational evolution of such artifacts remain under-specified. This paper proposes a framework for governed runtime evolution in multi-agent systems through executable operational cognition. We formalize agent-generated artifacts as persistent runtime capabilities that progressively become part of the operational substrate rather than transient intermediate outputs. Building on this perspective, we introduce HarnessMutation as a governed mechanism for lifecycle-aware runtime adaptation operating under explicit validation, traceability, evaluation, and rollback constraints. Rather than treating runtime adaptation as unrestricted self-modification, the proposed framework models evolution as a bounded and observable process over persistent operational memory. It further shows how these ideas can be operationalized over modern agent runtimes and governance-oriented orchestration systems, providing a conceptual foundation for adaptive infrastructures whose evolution remains explicit, auditable, and constrained.

Autonomous coding agents built on large language models (LLMs) are rapidly being integrated into development workflows, yet their operational safety properties remain poorly understood beyond evaluations of explicitly malicious inputs. In practice, high-impact failures arise during benign, goal-directed use through environment breakage, fabricated success reports, etc. that current benchmarks do not capture. What categories of operational safety failures actually occur when coding agents are used for everyday development tasks and what is their impact? We present an incident-driven empirical study grounded in two complementary evidence streams. We screen 68,816 papers from 22 premier venues, curating 185 safety-relevant studies, and mine 16,586 GitHub issues from widely deployed LLM-powered coding tools, manually confirming 547 genuine safety failures. Applying systematic open coding over both corpora, we derive a multi-dimensional safety taxonomy of 33 operational risk types organized across seven dimensions, and annotate each incident with contributing factors, task context, severity, and downstream impact. Our findings show that coding-agent failures are often severe, with 326 of 547 incidents rated high or critical. The dominant risks are constraint violations, destructive operations, authorization bypasses, and deception, and over 65% of incidents arise in bug fixing and setup or configuration, patterns largely missing from prior literature. These results have direct implications for SE tool designers and benchmark developers: guardrails must go beyond adversarial-prompt defenses to enforce environmental constraints, failure transparency, and safe-halt behaviors.

Achieving general-purpose robotic manipulation requires robots to seamlessly bridge high-level semantic intent with low-level physical interaction in unstructured environments. However, existing approaches falter in zero-shot generalization: end-to-end Vision-Language-Action (VLA) models often lack the precision required for long-horizon tasks, while traditional hierarchical planners suffer from semantic rigidity when facing open-world variations. To address this, we present UniManip, a framework grounded in a Bi-level Agentic Operational Graph (AOG) that unifies semantic reasoning and physical grounding. By coupling a high-level Agentic Layer for task orchestration with a low-level Scene Layer for dynamic state representation, the system continuously aligns abstract planning with geometric constraints, enabling robust zero-shot execution. Unlike static pipelines, UniManip operates as a dynamic agentic loop: it actively instantiates object-centric scene graphs from unstructured perception, parameterizes these representations into collision-free trajectories via a safety-aware local planner, and exploits structured memory to autonomously diagnose and recover from execution failures. Extensive experiments validate the system's robust zero-shot capability on unseen objects and tasks, demonstrating a 22.5% and 25.0% higher success rate compared to state-of-the-art VLA and hierarchical baselines, respectively. Notably, the system enables direct zero-shot transfer from fixed-base setups to mobile manipulation without fine-tuning or reconfiguration. Our open-source project page can be found at https://henryhcliu.github.io/unimanip.

Long-horizon reasoning requires an agentic runtime that can persist when evidence supports its current approach and pivot when measurements reveal failure, hidden constraints, or a misspecified objective. We present Argus, a persistent, self-evolving runtime in which Manager, Planner, Engineer, and Reviewer execute bounded missions over durable project state. Argus separates stable user intent from operational objectives, constraints, and verification criteria, and admits memories, skills, procedures, verifiers, routing decisions, and rejected routes only after role-owned review and, when available, task-native verification. Model weights remain fixed; self-evolution occurs through persistent runtime state and control policy, with autonomous execution between operator-owned escalation points. Across seven GPT-5.5 benchmark arenas, Argus achieves about 78% on SWE-Bench Pro versus 59% for Direct Copilot while using 1.41 times the aggregate tokens. After verification-gated self-evolution, mature SWE-Bench waves use 21% fewer solve-input tokens and 15% less active workflow time per task than startup waves, while recording 34 verifier recoveries and 22 strict review-loop rescues. Argus also reaches 76.8% on AARRI-Bench and a 28.0-point gap on mathematical data synthesis, with competitive GPU-kernel and language-model-training results. Beyond benchmarks, an optimized RWKV6 kernel was merged upstream; a multi-day mathematics campaign retained falsified routes and proof-backed frontier updates; and six paper pipelines completed 254 missions with 16 stage rollbacks. These results show that a fixed-weight, self-evolving harness can revise, recover, and accumulate verified approaches while producing structured trajectories for future supervised and reinforcement learning.

Recent advances in reinforcement learning (RL) have demonstrated impressive whole-body agility for humanoid robots, yet ensuring safety and satisfying constraints -- particularly those specified after training -- remains a challenge. Towards this goal, we present ConstrainedMimic, a control framework that leverages whole-body kinematics and dynamics for real-time constraint enforcement within RL tracking policies. By integrating principles from operational space control and control barrier functions (CBFs), we enable the satisfaction of arbitrary runtime constraints on both the kinematic reference motion and the underlying dynamics. In whole-body motion-tracking and teleoperation experiments on a (simulated) Unitree G1 with a learned policy, we demonstrate collision avoidance (both with the robot body and external obstacles), joint limits, and center of mass stability constraints. By remaining consistent with the current contact mode and tracking objectives, we minimally restrict the capabilities of the policy when constraints are active. Our method is fully differentiable, runs on CPU, GPU, and TPU, and can be deployed at up to 300-500 Hz. All software will be freely available upon publication.

LLM inference is still evaluated mainly as a model or software problem: accuracy, latency, throughput, and hardware utilization. This is incomplete. At deployment scale, the relevant output is a quality-conditioned token produced under joint constraints from effective compute, delivered data-center power, cooling capacity, PUE, and utilization. We argue that the ML community should treat inference as energy-to-token production. We formalize this view with a dimensionally consistent Token Production Function in which token rate is bounded by both compute-per-token and energy-per-token ceilings. Listed API prices vary by over an order of magnitude across providers, but we use price dispersion only as directional motivation, not as causal evidence of marginal cost. The core physical question is instead: under fixed quality and service targets, when does the binding constraint move from theoretical peak compute toward delivered power, cooling, and operational efficiency? Under this framing, system optimizations -- latent KV-cache compression, sparse or heavily compressed attention, quantization, routing, and difficulty-adaptive reasoning -- are not merely local engineering tricks. They are energy-to-token levers because they reduce FLOPs/token, joules/token, memory traffic, or utilization losses under fixed (q^{*},s^{*}). We therefore call for inference papers and benchmarks to report Joules/token, active binding constraint, PUE-adjusted delivered power, and utilization-adjusted token output alongside accuracy and latency.

Industrial visual inspection in pharmaceutical production requires high accuracy under strict constraints on cycle time, hardware footprint, and operational cost. Manual inline inspection is still common, but it is affected by operator variability and limited throughput. Classical rule-based computer vision pipelines are often rigid and difficult to scale to highly variable production scenarios. To address these limitations, we present a semi-supervised anomaly detection framework based on a generative adversarial architecture with a residual autoencoder and a dense bottleneck, specifically designed for online deployment on a high-speed Blow-Fill-Seal (BFS) line. The model is trained only on nominal samples and detects anomalies through reconstruction residuals, providing both classification and spatial localization via heatmaps. The training set contains 2,815,200 grayscale patches. Experiments on a real industrial test kit show high detection performance while satisfying timing constraints compatible with a 500 ms acquisition slot.

Precipitation nowcasting, the high-resolution forecasting of precipitation up to two hours ahead, supports the real-world socio-economic needs of many sectors reliant on weather-dependent decision-making. State-of-the-art operational nowcasting methods typically advect precipitation fields with radar-based wind estimates, and struggle to capture important non-linear events such as convective initiations. Recently introduced deep learning methods use radar to directly predict future rain rates, free of physical constraints. While they accurately predict low-intensity rainfall, their operational utility is limited because their lack of constraints produces blurry nowcasts at longer lead times, yielding poor performance on more rare medium-to-heavy rain events. To address these challenges, we present a Deep Generative Model for the probabilistic nowcasting of precipitation from radar. Our model produces realistic and spatio-temporally consistent predictions over regions up to 1536 km x 1280 km and with lead times from 5-90 min ahead. In a systematic evaluation by more than fifty expert forecasters from the Met Office, our generative model ranked first for its accuracy and usefulness in 88% of cases against two competitive methods, demonstrating its decision-making value and ability to provide physical insight to real-world experts. When verified quantitatively, these nowcasts are skillful without resorting to blurring. We show that generative nowcasting can provide probabilistic predictions that improve forecast value and support operational utility, and at resolutions and lead times where alternative methods struggle.

Recent advances in persistent personal-agent frameworks are making human-centered agent networks realistic deployment targets: each user can be served by an AI agent that acts on the user's behalf, maintains state, and communicates with other agents through social and task relations. In these networks, everyday tool use becomes multi-party owned-agent collaboration over personal workspaces, where files, records, tools, and policies are not directly visible across owners. Existing agent benchmarks study tool use and collaboration, but they do not provide an end-to-end sandbox for verifiable cross-user agent collaboration with realistic user digital workspaces or test how harmful actions can travel through the human-centered agent network. We introduce WeClawArena, an auditable benchmark and runtime sandbox for multi-party owned-agent collaboration over personal workspaces. WeClawArena targets collaborative tool-use tasks in which personal workspaces serve as both operational tools and personal constraints. The benchmark contains 124 base tasks across six cross-user task domains and expands them into 620 scenario variants, with one benign control and four attack-vector variants per base task. The sandbox records peer messages, tool calls, resource operations, governed decisions, and final workspace states. WeClawArena reports utility and attack success rate separately and audits attack success from bounded runtime evidence, supporting diagnosis of task breakdown, privacy leakage, poisoned evidence, and invalid authority paths.

Multimodal Large Language Models (MLLMs) have empowered embodied agents with remarkable capabilities in planning and reasoning. However, when facing ambiguous natural language instructions (e.g., "fetch the tool" in a cluttered room), current agents often fail to balance the high cost of physical exploration against the cognitive cost of human interaction. They typically treat disambiguation as a passive perception problem, lacking the strategic reasoning to minimize total task execution costs. To bridge this gap, we propose ESearch-R1, a cost-aware embodied reasoning framework that unifies interactive dialogue (Ask), episodic memory retrieval (GetMemory), and physical navigation (Navigate) into a single decision process. We introduce HC-GRPO (Heterogeneous Cost-Aware Group Relative Policy Optimization). Unlike traditional PPO which relies on a separate value critic, HC-GRPO optimizes the MLLM by sampling groups of reasoning trajectories and reinforcing those that achieve the optimal trade-off between information gain and heterogeneous costs (e.g., navigate time, and human attention). Extensive experiments in AI2-THOR demonstrate that ESearch-R1 significantly outperforms standard ReAct-based agents. It improves task success rates while reducing total operational costs by approximately 50\%, validating the effectiveness of GRPO in aligning MLLM agents with physical world constraints.

Despite the impressive manipulation capabilities of Vision-Language-Action (VLA) models, their operational safety under strict constraints remains largely unverified. To address this, we introduce a parametric safety benchmark to procedurally generate safety-critical scenarios with comprehensive stochasticity. To overcome the scalability bottlenecks of human teleoperation, we develop a novel keypose-driven data generation pipeline. Leveraging this infrastructure, we curate a large-scale dataset of 19,664 strictly collision-free demonstrations with extensive domain randomization. We then conduct a systematic cross-paradigm evaluation of eight VLA and two embodied foundation models. Our analysis reveals a critical generalization-safety tension: although high-diversity training fosters safer trajectories, task success remains fundamentally bottlenecked by sub-optimal trajectory synthesis and semantic misalignment. By providing a scalable pipeline, a robust dataset, and profound failure-mode insights, LIBERO-Safety establishes a crucial foundation for developing safe and reliable VLA models.

We present an update to ECMWF's machine-learned weather forecasting model AIFS Single with several key improvements. The model now incorporates physical consistency constraints through bounding layers, an updated training schedule, and an expanded set of variables. The physical constraints substantially improve precipitation forecasts and the new variables show a high level of skill. Upper-air headline scores also show improvement over the previous AIFS version. The AIFS has been fully operational at ECMWF since the 25th of February 2025.

Recent advances in Large Language Models (LLMs) have sparked concerns over their potential to acquire and misuse dangerous or high-risk capabilities, posing frontier risks. Current safety evaluations primarily test for what a model can do - its capabilities - without assessing what it would do if endowed with high-risk capabilities. This leaves a critical blind spot: models may strategically conceal capabilities or rapidly acquire them, while harboring latent inclinations toward misuse. We argue that propensity - the likelihood of a model to pursue harmful actions if empowered - is a critical, yet underexplored, axis of safety evaluation. We present PropensityBench, a novel benchmark framework that assesses the proclivity of models to engage in risky behaviors when equipped with simulated dangerous capabilities using proxy tools. Our framework includes 5,874 scenarios with 6,648 tools spanning four high-risk domains: cybersecurity, self-proliferation, biosecurity, and chemical security. We simulate access to powerful capabilities via a controlled agentic environment and evaluate the models' choices under varying operational pressures that reflect real-world constraints or incentives models may encounter, such as resource scarcity or gaining more autonomy. Across open-source and proprietary frontier models, we uncover 9 alarming signs of propensity: models frequently choose high-risk tools when under pressure, despite lacking the capability to execute such actions unaided. These findings call for a shift from static capability audits toward dynamic propensity assessments as a prerequisite for deploying frontier AI systems safely. Our code is available at https://github.com/scaleapi/propensity-evaluation.

Similar to conventional video generation, current deep learning-based weather prediction frameworks often lack explicit physical constraints, leading to unphysical outputs that limit their reliability for operational forecasting. Among various physical processes requiring proper representation, radiation plays a fundamental role as it drives Earth's weather and climate systems. However, accurate simulation of radiative transfer processes remains challenging for traditional numerical weather prediction (NWP) models due to their inherent complexity and high computational costs. Here, we propose FuXi-RTM, a hybrid physics-guided deep learning framework designed to enhance weather forecast accuracy while enforcing physical consistency. FuXi-RTM integrates a primary forecasting model (FuXi) with a fixed deep learning-based radiative transfer model (DLRTM) surrogate that efficiently replaces conventional radiation parameterization schemes. This represents the first deep learning-based weather forecasting framework to explicitly incorporate physical process modeling. Evaluated over a comprehensive 5-year dataset, FuXi-RTM outperforms its unconstrained counterpart in 88.51% of 3320 variable and lead time combinations, with improvements in radiative flux predictions. By incorporating additional physical processes, FuXi-RTM paves the way for next-generation weather forecasting systems that are both accurate and physically consistent.

World models are transitioning from passive visual generators to foundational, operational infrastructure for Physical AI: they must natively acquire world knowledge from heterogeneous experience, maintain persistent states over long horizons, and execute efficiently within real deployment constraints. We introduce Kairos, a native world model stack designed around these requirements. (1) Kairos learns the world by pioneering a Native Pre-training Paradigm governed by a Cross-Embodiment Data Curriculum, which organizes open-world videos, human behavioral data, and robot interactions into a progressive developmental pathway. (2) Kairos maintains the world by unified world understanding, generation, and prediction within a Native Unified Architecture equipped with Hybrid Linear Temporal Attention, where sliding-window attention captures local dynamics, dilated sliding windows capture mid-range dependencies, and gated linear attention maintains persistent global memory. We establish formal theoretical bounds demonstrating that this temporal factorization strictly limits error accumulation, mathematically guaranteeing state propagation across extended horizons. (3) Kairos runs the world by incorporating a Deployment-Aware System Co-Design to support low-latency rollout generation on server and consumer-grade hardware for real-world observation-action-feedback loops. Experiments on embodied world-model, long-horizon, and action-policy benchmarks show that Kairos achieves top level performance while offering a strong efficiency-capability trade-off. Together, these results position Kairos as a cohesive operational foundation for future self-evolving physical intelligence.

Very High Resolution (VHR) forest structure data at individual-tree scale is essential for carbon, biodiversity, and ecosystem monitoring. Still, airborne LiDAR remains costly and infrequent despite being the reference for forest structure metrics like Canopy Height Model (CHM), Plant Area Index (PAI), and Foliage Height Diversity (FHD). We propose FSKD: a LiDAR-to-RGB-Infrared (RGBI) knowledge distillation (KD) framework in which a multi-modal teacher fuses RGBI imagery with LiDAR-derived planar metrics and vertical profiles via cross-attention, and an RGBI-only SegFormer student learns to reproduce these outputs. Trained on 384 km^2 of forests in Saxony, Germany (20 cm ground sampling distance (GSD)) and evaluated on eight geographically distinct test tiles, the student achieves state-of-the-art (SOTA) zero-shot CHM performance (MedAE 4.17 m, R^2=0.51, IoU 0.87), outperforming HRCHM/DAC baselines by 29--46% in MAE (5.81 m vs. 8.14--10.84 m) with stronger correlation coefficients (0.713 vs. 0.166--0.652). Ablations show that multi-modal fusion improves performance by 10--26% over RGBI-only training, and that asymmetric distillation with appropriate model capacity is critical. The method jointly predicts CHM, PAI, and FHD, a multi-metric capability not provided by current monocular CHM estimators, although PAI/FHD transfer remains region-dependent and benefits from local calibration. The framework also remains effective under temporal mismatch (winter LiDAR, summer RGBI), removing strict co-acquisition constraints and enabling scalable 20 cm operational monitoring for workflows such as Digital Twin Germany and national Digital Orthophoto programs.

Operational flood forecasting depends on tacit forecaster expertise that is difficult to formalize, audit, and transfer. Although artificial intelligence methods have advanced flood prediction and model-error correction, most existing studies have not explicitly represented the tacit expert rules, review checkpoints, and workflow constraints that connect model outputs to operational warning decisions. To address this issue, we propose HydroAgent, a skill-orchestrated agent framework that embeds Large Language Models (LLMs) into a model-driven flood forecasting workflow, where each skill encodes explicit rules to bound LLM reasoning. We validated its effectiveness using five state-of-the-art LLMs in the South Yamhill River basin. Our results demonstrate that prior judgment captures observed peak flow and flood volume within 5% tolerance in 10 and 11 out of 14 events, with 5-fold cross-validation over 129 events yielding Pearson correlations of 0.62 and 0.84. Building on a high-baseline scheme library (average KGE 0.890), the guided scheme selection further improves KGE by 0.023-0.154, with simulated peak flow and flood volume falling within the prior judgment ranges for 14 and 13 out of 14 events. All five tested LLMs successfully execute the HydroAgent workflow with comparable judgment accuracy (40%-80%), while showing moderate performance variation and substantial cost differences. HydroAgent does not aim to replace human forecasters; instead, it translates their tacit expertise into an auditable and reproducible workflow, streamlining analytical steps and supporting more informed decision-making. This skill-orchestrated paradigm demonstrates how explicit rule boundaries can guide language model reasoning to complement physically based simulation in next-generation flood forecasting.

Large Language Model (LLM)-based question-answering systems offer significant potential for automating customer support and internal knowledge access in small businesses, yet their practical deployment remains challenging due to infrastructure costs, engineering complexity, and security risks, particularly in retrieval-augmented generation (RAG)-based settings. This paper presents an industry case study of an open-source, multi-tenant platform that enables small businesses to deploy customised LLM-based support chatbots via a no-code workflow. The platform is built on distributed, lightweight k3s clusters spanning heterogeneous, low-cost machines and interconnected through an encrypted overlay network, enabling cost-efficient resource pooling while enforcing container-based isolation and per-tenant data access controls. In addition, the platform integrates practical, platform-level defences against prompt injection attacks in RAG-based chatbots, translating insights from recent prompt injection research into deployable security mechanisms without requiring model retraining or enterprise-scale infrastructure. We evaluate the proposed platform through a real-world e-commerce deployment, demonstrating that secure and efficient LLM-based chatbot services can be achieved under realistic cost, operational, and security constraints faced by small businesses.

With the development and widespread application of large language models (LLMs), the new paradigm of "Model as Product" is rapidly evolving, and demands higher capabilities to address complex user needs, often requiring precise workflow execution which involves the accurate understanding of multiple tasks. However, existing benchmarks focusing on single-task environments with limited constraints lack the complexity required to fully reflect real-world scenarios. To bridge this gap, we present the Extremely Complex Instruction Following Benchmark (EIFBENCH), meticulously crafted to facilitate a more realistic and robust evaluation of LLMs. EIFBENCH not only includes multi-task scenarios that enable comprehensive assessment across diverse task types concurrently, but also integrates a variety of constraints, replicating complex operational environments. Furthermore, we propose the Segment Policy Optimization (SegPO) algorithm to enhance the LLM's ability to accurately fulfill multi-task workflow. Evaluations on EIFBENCH have unveiled considerable performance discrepancies in existing LLMs when challenged with these extremely complex instructions. This finding underscores the necessity for ongoing optimization to navigate the intricate challenges posed by LLM applications.

Accurate prediction of climate in the subseasonal-to-seasonal scale is crucial for disaster readiness, reduced economic risk, and improved policy-making amidst climate change. Yet, S2S prediction remains challenging due to the chaotic nature of the system. At present, existing benchmarks for weather and climate applications, tend to (1) have shorter forecasting range of up-to 14 days, (2) do not include a wide range of operational baseline forecasts, and (3) lack physics-based constraints for explainability. Thus, we propose ChaosBench, a large-scale, multi-channel, physics-based benchmark for S2S prediction. ChaosBench has over 460K frames of real-world observations and simulations, each with 60 variable-channels and spanning for up-to 45 years. We also propose several physics-based, in addition to vision-based metrics, that enables for a more physically-consistent model. Furthermore, we include a diverse set of physics-based forecasts from 4 national weather agencies as baselines to our data-driven counterpart. We establish two tasks that vary in complexity: full and sparse dynamics prediction. Our benchmark is one of the first to perform large-scale evaluation on existing models including PanguWeather, FourCastNetV2, GraphCast, and ClimaX, and finds methods originally developed for weather-scale applications fails on S2S task. We release our benchmark code and datasets at https://leap-stc.github.io/ChaosBench.

Unified audio-language modeling has emerged as a prominent trend in modern speech systems, promising to bring the reasoning capabilities of large language models to auditory tasks. However, existing unified foundations often struggle to match the depth of specialized systems across automatic speech recognition (ASR), text-to-speech synthesis (TTS), and realtime spoken interaction. Bridging this gap remains an open challenge. This report presents StepAudio 2.5, a unified audio-language foundation model that matches or exceeds specialized systems across all three capabilities. Rather than treating these tasks as architecturally distinct, we operate on the premise that once text and audio share a multimodal representational space, task specialization becomes a matter of operational regimes: data construction, optimization targets, and decoding constraints. Guided by this insight, we advance the post-training paradigm from standard supervised learning to task-tailored Reinforcement Learning from Human Feedback (RLHF), using it as the primary mechanism to define complex optimization targets. We leverage this RLHF-centric alignment, alongside specialized decoding, to shape a shared backbone into three distinct operational modes. Concretely, the ASR branch advances transcription efficiency via verifiable multi-token decoding; the TTS branch achieves controllable, expressive synthesis through preference-based RLHF and context-rich supervision; and the Realtime branch realizes low-latency, persona-consistent dialogue via generative reward modeling within an RLHF framework. On standard benchmarks, StepAudio 2.5 achieves state-of-the-art results across ASR, TTS, and Realtime, demonstrating that a singular audio-language foundation can successfully internalize the distinct deployment objectives of speech understanding, generation, and live interaction.

We implement and benchmark on IBM Quantum hardware the circuit family proposed by Violaris for estimating operational inter-branch communication witnesses, defined as correlations in classical measurement records produced by compiled Wigner's-friend-style circuits. We realize a five-qubit instance of the protocol as an inter-register message-transfer pattern within a single circuit, rather than physical signaling, and evaluate its behavior under realistic device noise and compilation constraints. The circuit encodes branch-conditioned evolution of an observer subsystem whose dynamics depend on a control qubit, followed by a controlled transfer operation that probes correlations between conditional measurement contexts. Executing on the ibm_fez backend with 20000 shots, we observe population-based visibility of 0.877, coherence witnesses of 0.840 and -0.811 along orthogonal axes, and a phase-sensitive magnitude of approximately 1.17. While the visibility metric is insensitive to some classes of dephasing, the coherence witnesses provide complementary sensitivity to off-diagonal noise. This work does not test or discriminate among interpretations of quantum mechanics. Instead, it provides a reproducible operational constraint pipeline for evaluating detectability of non-ideal channels relative to calibrated device noise.

This paper presents a distributed algorithm applicable to a wide range of practical multi-robot applications. In such multi-robot applications, the user-defined objectives of the mission can be cast as a general optimization problem, without explicit guidelines of the subtasks per different robot. Owing to the unknown environment, unknown robot dynamics, sensor nonlinearities, etc., the analytic form of the optimization cost function is not available a priori. Therefore, standard gradient-descent-like algorithms are not applicable to these problems. To tackle this, we introduce a new algorithm that carefully designs each robot's subcost function, the optimization of which can accomplish the overall team objective. Upon this transformation, we propose a distributed methodology based on the cognitive-based adaptive optimization (CAO) algorithm, that is able to approximate the evolution of each robot's cost function and to adequately optimize its decision variables (robot actions). The latter can be achieved by online learning only the problem-specific characteristics that affect the accomplishment of mission objectives. The overall, low-complexity algorithm can straightforwardly incorporate any kind of operational constraint, is fault-tolerant, and can appropriately tackle time-varying cost functions. A cornerstone of this approach is that it shares the same convergence characteristics as those of block coordinate descent algorithms. The proposed algorithm is evaluated in three heterogeneous simulation set-ups under multiple scenarios, against both general-purpose and problem-specific algorithms. Source code is available at https://github.com/athakapo/A-distributed-plug-n-play-algorithm-for-multi-robot-applications.

Numerous real-world decision-making problems can be formulated and solved using Mixed-Integer Linear Programming (MILP) models. However, the transformation of these problems into MILP models heavily relies on expertise in operations research and mathematical optimization, which restricts non-experts' accessibility to MILP. To address this challenge, we propose a framework for automatically formulating MILP models from unstructured natural language descriptions of decision problems, which integrates Large Language Models (LLMs) and mathematical modeling techniques. This framework consists of three phases: i) identification of decision variables, ii) classification of objective and constraints, and iii) finally, generation of MILP models. In this study, we present a constraint classification scheme and a set of constraint templates that can guide the LLMs in synthesizing a complete MILP model. After fine-tuning LLMs, our approach can identify and synthesize logic constraints in addition to classic demand and resource constraints. The logic constraints have not been studied in existing work. To evaluate the performance of the proposed framework, we extend the NL4Opt dataset with more problem descriptions and constraint types, and with the new dataset, we compare our framework with one-step model generation methods offered by LLMs. The experimental results reveal that with respect to the accuracies of generating the correct model, objective, and constraints, our method which integrates constraint classification and templates with LLMs significantly outperforms the others. The prototype system that we developed has a great potential to capture more constraints for more complex MILPs. It opens up opportunities for developing training tools for operations research practitioners and has the potential to be a powerful tool for automatic decision problem modeling and solving in practice.

An important feature of many real world facility location problems are capacity limits on the facilities. We show here how capacity constraints make it harder to design strategy proof mechanisms for facility location, but counter-intuitively can improve the guarantees on how well we can approximate the optimal solution.

Operations research (OR) is widely deployed to solve critical decision-making problems with complex objectives and constraints, impacting manufacturing, logistics, finance, and healthcare outcomes. While Large Language Models (LLMs) have shown promising results in various domains, their practical application in industry-relevant operations research (OR) problems presents significant challenges and opportunities. Preliminary industrial applications of LLMs for operations research face two critical deployment challenges: 1) Self-correction focuses on code syntax rather than mathematical accuracy, causing costly errors; 2) Complex expert selection creates unpredictable workflows that reduce transparency and increase maintenance costs, making them impractical for time-sensitive business applications. To address these business limitations, we introduce ORMind, a cognitive-inspired framework that enhances optimization through counterfactual reasoning. Our approach emulates human cognition, implementing an end-to-end workflow that systematically transforms requirements into mathematical models and executable solver code. It is currently being tested internally in Lenovo's AI Assistant, with plans to enhance optimization capabilities for both business and consumer customers. Experiments demonstrate that ORMind outperforms existing methods, achieving a 9.5\% improvement on the NL4Opt dataset and a 14.6\% improvement on the ComplexOR dataset.

Regardless of the particular task we want them to perform in an environment, there are often shared safety constraints we want our agents to respect. For example, regardless of whether it is making a sandwich or clearing the table, a kitchen robot should not break a plate. Manually specifying such a constraint can be both time-consuming and error-prone. We show how to learn constraints from expert demonstrations of safe task completion by extending inverse reinforcement learning (IRL) techniques to the space of constraints. Intuitively, we learn constraints that forbid highly rewarding behavior that the expert could have taken but chose not to. Unfortunately, the constraint learning problem is rather ill-posed and typically leads to overly conservative constraints that forbid all behavior that the expert did not take. We counter this by leveraging diverse demonstrations that naturally occur in multi-task settings to learn a tighter set of constraints. We validate our method with simulation experiments on high-dimensional continuous control tasks.

Enterprise agents must follow long-horizon, conditional, safety-critical standard operating procedures (SOPs). We compile machine-readable SOP constraints into executable pseudo-code and run them with a program-guided (PG) stack machine that pages the active frame while an LLM performs semantic execution. A three-arm SOPBench study across six models separates representation from runtime: compiled text never significantly hurts and gains up to 16.0 points where official prose underperforms. Runtime guidance is capability-gated. Two strong models independently show positive seven-domain PG contrasts (58:19 and 75:31 discordant pairs), whereas weak models are harmed. A full-program cursor ablation (active frame first, complete program retained) recovers much of the strong-model refusal gain; selective visibility adds a smaller improvement. Paired probe and audit measurements track this divide to spontaneous state discipline rather than reconstruction ability. On Bank the three primary arms rise from 70.4 to 86.4 to 92.8, with 100% refusal correctness. Practical guidance: compile first; enable active-frame paging only after a model-level discipline check.

We consider function optimization as a sequential decision making problem under budget constraint. This constraint limits the number of objective function evaluations allowed during the optimization. We consider an algorithm inspired by a continuous version of a multi-armed bandit problem which attacks this optimization problem by solving the tradeoff between exploration (initial quasi-uniform search of the domain) and exploitation (local optimization around the potentially global maxima). We introduce the so-called Simultaneous Optimistic Optimization (SOO), a deterministic algorithm that works by domain partitioning. The benefit of such approach are the guarantees on the returned solution and the numerical efficiency of the algorithm. We present this machine learning approach to optimization, and provide the empirical assessment of SOO on the CEC'2014 competition on single objective real-parameter numerical optimization test-suite.

Large language models are increasingly deployed as autonomous agents for multi-step tasks in executable environments, yet their ability to perform realistic operations research (OR) work remains unclear. Existing OR evaluations often decouple modeling from solving, rely on pre-formalized or text-only instances, and rarely test the full workflow from operational artifacts to validated decisions. In this work, we introduce ORAgentBench, an execution-grounded benchmark for evaluating autonomous agents on challenging end-to-end operations research tasks. It contains 107 human-reviewed tasks across diverse operational scenarios, each packaged in an isolated environment with a natural-language brief, multi-file data, configuration artifacts, and a required submission schema. Agents must write and run solution code, and their submissions are evaluated by hidden validators for schema validity, hard-constraint feasibility, and normalized objective quality. Experiments with fourteen frontier agent-model configurations show that current agents remain far from reliable OR practice. The best agent passes only 35.51% of all tasks and 20.59% of hard tasks, and many feasible submissions still fall below the required quality threshold. Failure analysis further shows that errors are dominated by strategic weaknesses, including missed operational rules, brittle formulations, weak feasible-solution construction, and insufficient solution improvement. OR-specific procedural skills increase hard-task feasibility, but do not reliably improve solution quality or pass rate. These results suggest that progress in OR agents requires moving beyond plausible optimization code toward dependable, high-quality operational decision-making.

In this paper, we propose a new mixed-integer linear programming (MILP) model ontology and a novel constraint typology of MILP formulations. MILP is a commonly used mathematical programming technique for modelling and solving real-life scheduling, routing, planning, resource allocation, and timetabling optimization problems providing optimized business solutions for industry sectors such as manufacturing, agriculture, defence, healthcare, medicine, energy, finance, and transportation. Despite the numerous real-life Combinatorial Optimization Problems found and solved and millions yet to be discovered and formulated, the number of types of constraints (the building blocks of a MILP) is relatively small. In the search for a suitable machine-readable knowledge representation structure for MILPs, we propose an optimization modelling tree built based upon an MILP model ontology that can be used as a guide for automated systems to elicit an MILP model from end-users on their combinatorial business optimization problems. Our ultimate aim is to develop a machine-readable knowledge representation for MILP that allows us to map an end-user's natural language description of the business optimization problem to an MILP formal specification as a first step towards automated mathematical modelling.

Large language models can produce creative and diverse responses. However, to integrate them into current developer workflows, it is essential to constrain their outputs to follow specific formats or standards. In this work, we surveyed 51 experienced industry professionals to understand the range of scenarios and motivations driving the need for output constraints from a user-centered perspective. We identified 134 concrete use cases for constraints at two levels: low-level, which ensures the output adhere to a structured format and an appropriate length, and high-level, which requires the output to follow semantic and stylistic guidelines without hallucination. Critically, applying output constraints could not only streamline the currently repetitive process of developing, testing, and integrating LLM prompts for developers, but also enhance the user experience of LLM-powered features and applications. We conclude with a discussion on user preferences and needs towards articulating intended constraints for LLMs, alongside an initial design for a constraint prototyping tool.

Low Earth orbit (LEO) satellites increasingly carry compute hardware capable of on-board processing, yet each satellite generates roughly two orders of magnitude more data than it can downlink per orbit. This mismatch forces operators to decide, for every workload, which computation runs on-board and which runs on the ground, how intermediate data crosses the space-ground boundary through narrow contact windows, and how to maintain delivery guarantees over noisy channels. We present Constraint-Aware Execution (CAE), a planning system that takes a satellite identifier, a workload expressed as a directed acyclic graph of processing steps, and a set of orbital and resource constraints, and produces a deterministic, physically grounded execution plan. CAE operates in four phases: (1) orbital environment construction via SGP4 propagation with eclipse detection and ground station pass prediction, (2) compute placement using a cost model that compares on-board resource consumption against transfer overhead, (3) transfer insertion with adaptive forward error correction and security overhead modeling, and (4) greedy first-fit scheduling into orbital windows under power, thermal, compute, and communication constraints. We evaluate CAE against five representative workload patterns across satellites in distinct orbital regimes and demonstrate that the system produces feasible plans in under two seconds, correctly exploits onboard data reduction to minimize transfer volume, and adapts FEC and multi-pass allocation to varying channel conditions. CAE is deployed as a production API computing plans for any cataloged satellite using live two-line element data.

Imposing known physical constraints, such as conservation laws, during neural network training introduces an inductive bias that can improve accuracy, reliability, convergence, and data efficiency for modeling physical dynamics. While such constraints can be softly imposed via loss function penalties, recent advancements in differentiable physics and optimization improve performance by incorporating PDE-constrained optimization as individual layers in neural networks. This enables a stricter adherence to physical constraints. However, imposing hard constraints significantly increases computational and memory costs, especially for complex dynamical systems. This is because it requires solving an optimization problem over a large number of points in a mesh, representing spatial and temporal discretizations, which greatly increases the complexity of the constraint. To address this challenge, we develop a scalable approach to enforce hard physical constraints using Mixture-of-Experts (MoE), which can be used with any neural network architecture. Our approach imposes the constraint over smaller decomposed domains, each of which is solved by an "expert" through differentiable optimization. During training, each expert independently performs a localized backpropagation step by leveraging the implicit function theorem; the independence of each expert allows for parallelization across multiple GPUs. Compared to standard differentiable optimization, our scalable approach achieves greater accuracy in the neural PDE solver setting for predicting the dynamics of challenging non-linear systems. We also improve training stability and require significantly less computation time during both training and inference stages.

Evaluation harnesses are software systems that orchestrate model evaluation by managing model invocation, data loading, metric computation, and result reporting. Despite their critical role in machine learning infrastructure, their operational challenges and engineering concerns have received limited attention so far. We present an empirical study of 57 evaluation harnesses, deriving a five-stage harness model and classifying 16,560 issues by workflow stage and root cause. Most harness operational challenges concentrate in the Specification stage (41.4% of issues), where harnesses integrate external models, datasets, and scoring judges. The three most frequent root causes of operational challenges are unimplemented features (24.3%), documentation gaps (20.3%), and missing input validation (17.2%), which together account for 61.7% of classified issues, spanning both defects in existing functionality and capability gaps that block intended workflows. Root causes also vary by workflow stage: environment incompatibility and external dependency breakage account for 36.2% of provisioning issues, whereas algorithmic error (25.9%) and validation gap (22.5%) dominate assessment issues. Together, these contributions establish an empirical foundation for treating evaluation engineering as a distinct software engineering concern.

Deploying foundation models in embodied edge systems is fundamentally a systems problem, not just a problem of model compression. Real-time control must operate within strict size, weight, and power constraints, where memory traffic, compute latency, timing variability, and safety margins interact directly. The Deployment Gauntlet organizes these constraints into eight coupled barriers that determine whether embodied foundation models can run reliably in practice. Across representative edge workloads, autoregressive Vision-Language-Action policies are constrained primarily by memory bandwidth, whereas diffusion-based controllers are limited more by compute latency and sustained execution cost. Reliable deployment therefore depends on system-level co-design across memory, scheduling, communication, and model architecture, including decompositions that separate fast control from slower semantic reasoning.

Large Language Model (LLM) safety is one of the most pressing challenges for enabling wide-scale deployment. While most studies and global discussions focus on generic harms, such as models assisting users in harming themselves or others, enterprises face a more fundamental concern: whether LLM-based agents are safe for their intended use case. To address this, we introduce operational safety, defined as an LLM's ability to appropriately accept or refuse user queries when tasked with a specific purpose. We further propose OffTopicEval, an evaluation suite and benchmark for measuring operational safety both in general and within specific agentic use cases. Our evaluations on six model families comprising 20 open-weight LLMs reveal that while performance varies across models, all of them remain highly operationally unsafe. Even the strongest models -- Qwen-3 (235B) with 77.77\% and Mistral (24B) with 79.96\% -- fall far short of reliable operational safety, while GPT models plateau in the 62--73\% range, Phi achieves only mid-level scores (48--70\%), and Gemma and Llama-3 collapse to 39.53\% and 23.84\%, respectively. While operational safety is a core model alignment issue, to suppress these failures, we propose prompt-based steering methods: query grounding (Q-ground) and system-prompt grounding (P-ground), which substantially improve OOD refusal. Q-ground provides consistent gains of up to 23\%, while P-ground delivers even larger boosts, raising Llama-3.3 (70B) by 41\% and Qwen-3 (30B) by 27\%. These results highlight both the urgent need for operational safety interventions and the promise of prompt-based steering as a first step toward more reliable LLM-based agents.

This paper proposes a formal framework for reverse stress testing geopolitical risk in corporate credit portfolios. A joint macro-financial scenario vector, augmented with an explicit geopolitical risk factor, is mapped into stressed probabilities of default and losses given default. These stresses are then propagated to portfolio tail losses through a latent factor structure and translated into a stressed CET1 ratio, jointly accounting for capital depletion and risk-weighted asset dynamics. Reverse stress testing is formulated as a constrained maximum likelihood problem over the scenario space. This yields a geopolitical point reverse stress test, or design point, defined as the most probable scenario that breaches a prescribed capital adequacy constraint under a reference distribution. The framework further characterises neighbourhoods and near optimal sets of reverse stress scenarios, allowing for sensitivity analysis and governance oriented interpretation. The approach is compatible with internal rating based models and supports implementation at the exposure or sector level.

Modern reinforcement learning (RL) systems capture deep truths about general, human problem-solving. In domains where new data can be simulated cheaply, these systems uncover sequential decision-making policies that far exceed the ability of any human. Society faces many problems whose solutions require this skill, but they are often in domains where new data cannot be cheaply simulated. In such scenarios, we can learn simulators from existing data, but these will only ever be approximately correct, and can be pathologically incorrect when queried outside of their training distribution. As a result, a misalignment between the environments in which we train our agents and the real-world in which we wish to deploy our agents is inevitable. Dealing with this misalignment is the primary concern of zero-shot reinforcement learning, a problem setting where the agent must generalise to a new task or domain with zero practice shots. Whilst impressive progress has been made on methods that perform zero-shot RL in idealised settings, new work is needed if these results are to be replicated in real-world settings. In this thesis, we argue that doing so requires us to navigate (at least) three constraints. First, the data quality constraint: real-world datasets are small and homogeneous. Second, the observability constraint: states, dynamics and rewards in the real-world are often only partially observed. And third, the data availability constraint: a priori access to data cannot always be assumed. This work proposes a suite of methods that perform zero-shot RL subject to these constraints. In a series of empirical studies we expose the failings of existing methods, and justify our techniques for remedying them. We believe these designs take us a step closer to RL methods that can be deployed to solve real-world problems.

Optimizing objective functions subject to constraints is fundamental in many real-world applications. However, these constraints are often not readily defined and must be inferred from expert agent behaviors, a problem known as Inverse Constraint Inference. Inverse Constrained Reinforcement Learning (ICRL) is a common solver for recovering feasible constraints in complex environments, relying on training samples collected from interactive environments. However, the efficacy and efficiency of current sampling strategies remain unclear. We propose a strategic exploration framework for sampling with guaranteed efficiency to bridge this gap. By defining the feasible cost set for ICRL problems, we analyze how estimation errors in transition dynamics and the expert policy influence the feasibility of inferred constraints. Based on this analysis, we introduce two exploratory algorithms to achieve efficient constraint inference via 1) dynamically reducing the bounded aggregate error of cost estimations or 2) strategically constraining the exploration policy around plausibly optimal ones. Both algorithms are theoretically grounded with tractable sample complexity, and their performance is validated empirically across various environments.

Radio-frequency portion of the electromagnetic spectrum is a scarce resource. Cognitive radio technology has emerged as a promising solution to overcome the spectrum scarcity bottleneck. Through this technology, secondary users (SUs) sense the spectrum opportunities free from primary users (PUs), and opportunistically take advantage of these (temporarily) idle portions, known as spectrum holes. In this correspondence, we consider a variant of the cognitive radio resource allocation problem posed by Martinovic et al. in 2017. The distinguishing feature of this version of the problem is that each SU, due to its hardware limitations, imposes the requirement that the to-be-aggregated spectrum holes cannot be arbitrarily far from each other. We call this restriction as the Maximal Aggregation Range (MAR) constraint, and refer to this variant of the problem as the MAR-constrained hole assignment problem. The problem can be formalized as an NP-hard combinatorial optimization problem. We propose a novel binary integer linear programming (ILP) formulation to the problem. The number of constraints in this formulation is the number of spectrum holes plus the number of SUs. On the other hand, the number of binary decision variables in the formulation can be prohibitively large, as for each legitimate spectrum allocation to each SU, one variable is needed. We propose a branch-and-price (B&P) framework to tackle this challenge. This framework is in fact a branch-and-bound procedure in which at each node of the search tree, we utilize the so-called (delayed) column generation technique for solving the LP relaxation of the corresponding subproblem. As evidenced by the numerical results, the LP relaxation bounds are very tight. This allows for a very effective pruning of the search space. Compared to the previously suggested formulations, the proposed technique can require much less computational effort.

Coding agents now produce a growing share of a team's code, while the reasoning behind each change -- the alternatives weighed, the constraints discovered, the approaches rejected -- is trapped in assistant transcripts that vanish with the session. Memory for this setting, the agentic development lifecycle (ADLC), is usually posed as one retrieval problem and built as machinery: tiered stores, memory graphs, compiled wikis, model-judged admission. We argue memory should instead be git-bound -- built into the repository's version control, inheriting the guarantees the machinery struggles to construct: ground truth from commits, freshness from rebuild, verification from the merge, containment from review. On this ledger we solve two problems separately, then combine them. Seed supply is closed as an eight-corpus retrieval study under a pre-registered ship discipline: five imported ranking mechanisms rejected, two kept, and a best configuration of ~0.31 pooled MRR -- ~60x the raw-transcript grep floor, ~15x an honest parsed-turn floor. Answer assembly is where ranking stops helping: single-shot retrieval scores only 0.07-0.20 answer-sufficiency on real developer questions, and ungated episode injection measurably degrades good answers. A router dispatches breadth to a git-anchored structural map, pointed lookups to confidence-gated episodes, and rationale to decision synthesis, which reconstructs why-arcs no single session contains (0.83 sufficiency on a young ~50k-LOC production system). Routed, the system answers at 382-980 tokens per question -- three orders of magnitude below the recorded history. Because ground truth is mined from commit-session links rather than annotated, every result is replicable on any user's own history at zero labeling cost. The remaining constraint is capture. Code, benchmark, and paper source: github.com/rekal-dev/rekal-cli.

We present a deployed system that automates end-to-end customer support workflows inside an enterprise Business Process Management (BPM) platform. The approach is scalable in production and reaches selective automation within two weeks for a new process, leveraging supervision already generated at scale: structured per-case UI interaction traces and low-overhead copilot feedback, where operators either accept a suggestion or provide a correction. A staged deployment pipeline trains a next UI action policy, learns a critic from copilot feedback to calibrate abstention, and executes only high-confidence steps in the background while deferring uncertain decisions to operators and resuming from the updated UI state. This setup lets one operator supervise multiple concurrent sessions and be interrupted only when the system is uncertain. The system operates on a schema-driven view of the BPM interface and includes monitoring and safe fallbacks for production. In production, it automated 45% of sessions and reduced average handling time by 39% without degrading support quality level.

Offline reinforcement learning (RL) optimizes the policy on a previously collected dataset without any interactions with the environment, yet usually suffers from the distributional shift problem. To mitigate this issue, a typical solution is to impose a policy constraint on a policy improvement objective. However, existing methods generally adopt a ``one-size-fits-all'' practice, i.e., keeping only a single improvement-constraint balance for all the samples in a mini-batch or even the entire offline dataset. In this work, we argue that different samples should be treated with different policy constraint intensities. Based on this idea, a novel plug-in approach named Guided Offline RL (GORL) is proposed. GORL employs a guiding network, along with only a few expert demonstrations, to adaptively determine the relative importance of the policy improvement and policy constraint for every sample. We theoretically prove that the guidance provided by our method is rational and near-optimal. Extensive experiments on various environments suggest that GORL can be easily installed on most offline RL algorithms with statistically significant performance improvements.

Operations Research practitioners debug infeasible models through an iterative process: inspecting Irreducible Infeasible Subsystems ( IIS), identifying constraint conflicts, and repairing formulations until feasibility is restored. Existing LLM benchmarks mostly treat OR as one-shot translation from problem descriptions to solver code, omitting this diagnostic loop. We formalize infeasible-model repair as a solver-in-the-loop Markov Decision Process in which each action triggers solver re-execution and IIS recomputation, yielding deterministic, verifiable feedback. We introduce ORLoopBench, a benchmark suite with two components: OR-Debug-Bench releases 5,362 LP/MILP repair instances, while OR-Bias-Bench evaluates closed-form operational decision rationality across inventory settings. Solver-verified RLVR training enables an 8B model to surpass frontier APIs on LP repair (95.3% vs 92.4% RR @5), improves diagnostic behavior, and transfers to MILP repair. The same evaluation exposes semantic drift in whole-model code regeneration: feasible regenerated MILPs can solve the wrong problem. Process-level evaluation with solver oracles enables targeted training for reliable OR self-correction.

Information Technology (IT) Operations (Ops), particularly Artificial Intelligence for IT Operations (AIOps), is the guarantee for maintaining the orderly and stable operation of existing information systems. According to Gartner's prediction, the use of AI technology for automated IT operations has become a new trend. Large language models (LLMs) that have exhibited remarkable capabilities in NLP-related tasks, are showing great potential in the field of AIOps, such as in aspects of root cause analysis of failures, generation of operations and maintenance scripts, and summarizing of alert information. Nevertheless, the performance of current LLMs in Ops tasks is yet to be determined. In this paper, we present OpsEval, a comprehensive task-oriented Ops benchmark designed for LLMs. For the first time, OpsEval assesses LLMs' proficiency in various crucial scenarios at different ability levels. The benchmark includes 7184 multi-choice questions and 1736 question-answering (QA) formats in English and Chinese. By conducting a comprehensive performance evaluation of the current leading large language models, we show how various LLM techniques can affect the performance of Ops, and discussed findings related to various topics, including model quantification, QA evaluation, and hallucination issues. To ensure the credibility of our evaluation, we invite dozens of domain experts to manually review our questions. At the same time, we have open-sourced 20% of the test QA to assist current researchers in preliminary evaluations of their OpsLLM models. The remaining 80% of the data, which is not disclosed, is used to eliminate the issue of the test set leakage. Additionally, we have constructed an online leaderboard that is updated in real-time and will continue to be updated, ensuring that any newly emerging LLMs will be evaluated promptly. Both our dataset and leaderboard have been made public.

Synthesizing optimal controllers for dynamical systems often involves solving optimization problems with hard real-time constraints. These constraints determine the class of numerical methods that can be applied: computationally expensive but accurate numerical routines are replaced by fast and inaccurate methods, trading inference time for solution accuracy. This paper provides techniques to improve the quality of optimized control policies given a fixed computational budget. We achieve the above via a hypersolvers approach, which hybridizes a differential equation solver and a neural network. The performance is evaluated in direct and receding-horizon optimal control tasks in both low and high dimensions, where the proposed approach shows consistent Pareto improvements in solution accuracy and control performance.

In recent years, Reinforcement Learning (RL) has been applied to real-world problems with increasing success. Such applications often require to put constraints on the agent's behavior. Existing algorithms for constrained RL (CRL) rely on gradient descent-ascent, but this approach comes with a caveat. While these algorithms are guaranteed to converge on average, they do not guarantee last-iterate convergence, i.e., the current policy of the agent may never converge to the optimal solution. In practice, it is often observed that the policy alternates between satisfying the constraints and maximizing the reward, rarely accomplishing both objectives simultaneously. Here, we address this problem by introducing Reinforcement Learning with Optimistic Ascent-Descent (ReLOAD), a principled CRL method with guaranteed last-iterate convergence. We demonstrate its empirical effectiveness on a wide variety of CRL problems including discrete MDPs and continuous control. In the process we establish a benchmark of challenging CRL problems.

Motivated by the operational problems in click and collect systems, such as curbside pickup programs, we study a joint admission control and capacity allocation problem. We consider a system where arriving customers have preferred service delivery times and gauge the service quality based on the service provider's ability to complete the service as close as possible to the preferred time. Customers can be of different priority classes, and their priority may increase as they wait longer in the queue. The service provider can reject customers upon their arrival if the system is overloaded or outsource the service (alternatively work overtime) when the capacity is not enough. The service provider's goal is to find the minimum-cost admission and capacity allocation policy to dynamically decide when to serve and whom to serve. We model this problem as a Markov Decision Process. Our structural results partially characterize a set of suboptimal solutions, and we develop solution methods using these results. We also develop a problem-specific approximation method that is based on state aggregation to overcome the computational challenges. We present extensive computational results and discuss the impact of problem parameters on the optimal policy.

Combinatorial problems are a common challenge in business, requiring finding optimal solutions under specified constraints. While significant progress has been made with variational approaches such as QAOA, most problems addressed are unconstrained (such as Max-Cut). In this study, we investigate a hybrid quantum-classical method for constrained optimization problems, particularly those with knapsack constraints that occur frequently in financial and supply chain applications. Our proposed method relies firstly on relaxations to local quantum Hamiltonians, defined through commutative maps. Drawing inspiration from quantum random access code (QRAC) concepts, particularly Quantum Random Access Optimizer (QRAO), we explore QRAO's potential in solving large constrained optimization problems. We employ classical techniques like Linear Relaxation as a presolve mechanism to handle constraints and cope further with scalability. We compare our approach with QAOA and present the final results for a real-world procurement optimization problem: a significant sized multi-knapsack-constrained problem.

It is crucial for large language models (LLMs) to follow instructions that involve multiple constraints. However, it is an unexplored area to enhance LLMs' ability to follow soft constraints. To bridge the gap, we initially design a pipeline to construct datasets with high-quality outputs automatically. Additionally, to fully utilize the positive and negative samples generated during the data construction process, we choose Direct Preference Optimization (DPO) as the training method. Furthermore, taking into account the difficulty of soft constraints indicated by the number of constraints, we design a curriculum learning training paradigm based on the constraint quantity. We experimentally evaluate the effectiveness of our methods in improving LLMs' soft constraint following ability and analyze the factors driving the improvements.The datasets and code are publicly available at https://github.com/Rainier-rq/FollowSoftConstraint.

Constraint Programming (CP) is a declarative programming paradigm that allows for modeling and solving combinatorial optimization problems, such as the Job-Shop Scheduling Problem (JSSP). While CP solvers manage to find optimal or near-optimal solutions for small instances, they do not scale well to large ones, i.e., they require long computation times or yield low-quality solutions. Therefore, real-world scheduling applications often resort to fast, handcrafted, priority-based dispatching heuristics to find a good initial solution and then refine it using optimization methods. This paper proposes a novel end-to-end approach to solving scheduling problems by means of CP and Reinforcement Learning (RL). In contrast to previous RL methods, tailored for a given problem by including procedural simulation algorithms, complex feature engineering, or handcrafted reward functions, our neural-network architecture and training algorithm merely require a generic CP encoding of some scheduling problem along with a set of small instances. Our approach leverages existing CP solvers to train an agent learning a Priority Dispatching Rule (PDR) that generalizes well to large instances, even from separate datasets. We evaluate our method on seven JSSP datasets from the literature, showing its ability to find higher-quality solutions for very large instances than obtained by static PDRs and by a CP solver within the same time limit.

Twenty-seven years ago, E. Freuder highlighted that "Constraint programming represents one of the closest approaches computer science has yet made to the Holy Grail of programming: the user states the problem, the computer solves it". Nowadays, CP users have great modeling tools available (like Minizinc and CPMpy), allowing them to formulate the problem and then let a solver do the rest of the job, getting closer to the stated goal. However, this still requires the CP user to know the formalism and respect it. Another significant challenge lies in the expertise required to effectively model combinatorial problems. All this limits the wider adoption of CP. In this position paper, we investigate a possible approach to leverage pre-trained Large Language Models to extract models from textual problem descriptions. More specifically, we take inspiration from the Natural Language Processing for Optimization (NL4OPT) challenge and present early results with a decomposition-based prompting approach to GPT Models.

We study the problem of constrained efficient global optimization, where both the objective and constraints are expensive black-box functions that can be learned with Gaussian processes. We propose CONFIG (CONstrained efFIcient Global Optimization), a simple and effective algorithm to solve it. Under certain regularity assumptions, we show that our algorithm enjoys the same cumulative regret bound as that in the unconstrained case and similar cumulative constraint violation upper bounds. For commonly used Matern and Squared Exponential kernels, our bounds are sublinear and allow us to derive a convergence rate to the optimal solution of the original constrained problem. In addition, our method naturally provides a scheme to declare infeasibility when the original black-box optimization problem is infeasible. Numerical experiments on sampled instances from the Gaussian process, artificial numerical problems, and a black-box building controller tuning problem all demonstrate the competitive performance of our algorithm. Compared to the other state-of-the-art methods, our algorithm significantly improves the theoretical guarantees, while achieving competitive empirical performance.

When applying offline reinforcement learning (RL) in healthcare scenarios, the out-of-distribution (OOD) issues pose significant risks, as inappropriate generalization beyond clinical expertise can result in potentially harmful recommendations. While existing methods like conservative Q-learning (CQL) attempt to address the OOD issue, their effectiveness is limited by only constraining action selection by suppressing uncertain actions. This action-only regularization imitates clinician actions that prioritize short-term rewards, but it fails to regulate downstream state trajectories, thereby limiting the discovery of improved long-term treatment strategies. To safely improve policy beyond clinician recommendations while ensuring that state-action trajectories remain in-distribution, we propose Offline Guarded Safe Reinforcement Learning (OGSRL), a theoretically grounded model-based offline RL framework. OGSRL introduces a novel dual constraint mechanism for improving policy with reliability and safety. First, the OOD guardian is established to specify clinically validated regions for safe policy exploration. By constraining optimization within these regions, it enables the reliable exploration of treatment strategies that outperform clinician behavior by leveraging the full patient state history, without drifting into unsupported state-action trajectories. Second, we introduce a safety cost constraint that encodes medical knowledge about physiological safety boundaries, providing domain-specific safeguards even in areas where training data might contain potentially unsafe interventions. Notably, we provide theoretical guarantees on safety and near-optimality: policies that satisfy these constraints remain in safe and reliable regions and achieve performance close to the best possible policy supported by the data.

Large Language Models (LLMs) have emerged as powerful tools for complex Operations Research (OR) in automating optimization modeling. However, current methodologies heavily rely on prompt engineering (e.g., multi-agent cooperation) with proprietary LLMs, raising data privacy concerns that could be prohibitive in industry applications. To tackle this issue, we propose training open-source LLMs for optimization modeling. We identify four critical requirements for the training dataset of OR LLMs, design and implement OR-Instruct, a semi-automated process for creating synthetic data tailored to specific requirements. We also introduce the IndustryOR benchmark, the first industrial benchmark for testing LLMs on solving real-world OR problems. We apply the data from OR-Instruct to various open-source LLMs of 7b size (termed as ORLMs), resulting in a significantly improved capability for optimization modeling. Our best-performing ORLM achieves state-of-the-art performance on the NL4OPT, MAMO, and IndustryOR benchmarks. Our code and data will be available at https://github.com/Cardinal-Operations/ORLM.

A modified LAB algorithm is introduced in this paper. It builds upon the original LAB algorithm (Reddy et al. 2023), which is a socio-inspired algorithm that models competitive and learning behaviours within a group, establishing hierarchical roles. The proposed algorithm incorporates the roulette wheel approach and a reduction factor introducing inter-group competition and iteratively narrowing down the sample space. The algorithm is validated by solving the benchmark test problems from CEC 2005 and CEC 2017. The solutions are validated using standard statistical tests such as two-sided and pairwise signed rank Wilcoxon test and Friedman rank test. The algorithm exhibited improved and superior robustness as well as search space exploration capabilities. Furthermore, a Clustering-Based Search Space Reduction (C-SSR) method is proposed, making the algorithm capable to solve constrained problems. The C-SSR method enables the algorithm to identify clusters of feasible regions, satisfying the constraints and contributing to achieve the optimal solution. This method demonstrates its effectiveness as a potential alternative to traditional constraint handling techniques. The results obtained using the Modified LAB algorithm are then compared with those achieved by other recent metaheuristic algorithms.

Large Language Models (LLMs) struggle to directly generate correct plans for complex multi-constraint planning problems, even with self-verification and self-critique. For example, a U.S. domestic travel planning benchmark TravelPlanner was proposed in Xie et al. (2024), where the best LLM OpenAI o1-preview can only find viable travel plans with a 10% success rate given all needed information. In this work, we tackle this by proposing an LLM-based planning framework that formalizes and solves complex multi-constraint planning problems as constrained satisfiability problems, which are further consumed by sound and complete satisfiability solvers. We start with TravelPlanner as the primary use case and show that our framework achieves a success rate of 93.9% and is effective with diverse paraphrased prompts. More importantly, our framework has strong zero-shot generalizability, successfully handling unseen constraints in our newly created unseen international travel dataset and generalizing well to new fundamentally different domains. Moreover, when user input queries are infeasible, our framework can identify the unsatisfiable core, provide failure reasons, and offers personalized modification suggestions. We show that our framework can modify and solve for an average of 81.6% and 91.7% unsatisfiable queries from two datasets and prove with ablations that all key components of our framework are effective and necessary. Project page: https://sites.google.com/view/llm-rwplanning.

Generative pre-trained transformer (GPT) models have revolutionized the field of natural language processing (NLP) with remarkable performance in various tasks and also extend their power to multimodal domains. Despite their success, large GPT models like GPT-4 face inherent limitations such as considerable size, high computational requirements, complex deployment processes, and closed development loops. These constraints restrict their widespread adoption and raise concerns regarding their responsible development and usage. The need for user-friendly, relatively small, and open-sourced alternative GPT models arises from the desire to overcome these limitations while retaining high performance. In this survey paper, we provide an examination of alternative open-sourced models of large GPTs, focusing on user-friendly and relatively small models that facilitate easier deployment and accessibility. Through this extensive survey, we aim to equip researchers, practitioners, and enthusiasts with a thorough understanding of user-friendly and relatively small open-sourced models of large GPTs, their current state, challenges, and future research directions, inspiring the development of more efficient, accessible, and versatile GPT models that cater to the broader scientific community and advance the field of general artificial intelligence. The source contents are continuously updating in https://github.com/GPT-Alternatives/gpt_alternatives.

Recent advances in Large Language Models (LLMs) have enabled the development of increasingly complex agentic and multi-agent systems capable of planning, tool use and task decomposition. However, empirical evidence shows that many of these systems suffer from fundamental reliability issues, including hallucinated actions, unexecutable plans and brittle coordination. Crucially, these failures do not stem from limitations of the underlying models themselves, but from the absence of explicit architectural structure linking goals, capabilities and execution. This paper presents a declarative, model-independent architectural layer for grounded agentic workflows that addresses this gap. The proposed layer, referred to as DALIA (Declarative Agentic Layer for Intelligent Agents), formalises executable capabilities, exposes tasks through a declarative discovery protocol, maintains a federated directory of agents and their execution resources, and constructs deterministic task graphs grounded exclusively in declared operations. By enforcing a clear separation between discovery, planning and execution, the architecture constrains agent behaviour to a verifiable operational space, reducing reliance on speculative reasoning and free-form coordination. We present the architecture and design principles of the proposed layer and illustrate its operation through a representative task-oriented scenario, demonstrating how declarative grounding enables reproducible and verifiable agentic workflows across heterogeneous environments.

This paper presents the Adaptive Personalized Control System (APECS) architecture, a novel framework for human-in-the-loop control. An architecture is developed which defines appropriate constraints for the system objectives. A method for enacting Lipschitz and sector bounds on the resulting controller is derived to ensure desirable control properties. An analysis of worst-case loss functions and the optimal loss function weighting is made to implement an effective training scheme. Finally, simulations are carried out to demonstrate the effectiveness of the proposed architecture. This architecture resulted in a 4.5% performance increase compared to the human operator and 9% to an unconstrained feedforward neural network trained in the same way.

The final goal of all industrial machine learning (ML) projects is to develop ML products and rapidly bring them into production. However, it is highly challenging to automate and operationalize ML products and thus many ML endeavors fail to deliver on their expectations. The paradigm of Machine Learning Operations (MLOps) addresses this issue. MLOps includes several aspects, such as best practices, sets of concepts, and development culture. However, MLOps is still a vague term and its consequences for researchers and professionals are ambiguous. To address this gap, we conduct mixed-method research, including a literature review, a tool review, and expert interviews. As a result of these investigations, we provide an aggregated overview of the necessary principles, components, and roles, as well as the associated architecture and workflows. Furthermore, we furnish a definition of MLOps and highlight open challenges in the field. Finally, this work provides guidance for ML researchers and practitioners who want to automate and operate their ML products with a designated set of technologies.

Large language model (LLM) agents are increasingly used to assist with operations research (OR) modeling, yet existing OR-oriented benchmarks often reduce evaluation to one-shot translation from a self-contained problem statement into a mathematical formulation or solver program. Such settings abstract away two characteristics of real industrial OR workflows: persistent multi-artifact workspaces and multi-stage task lifecycles. We introduce OR-Space, a full-lifecycle workspace benchmark for evaluating industrial optimization agents across model construction, model revision, and grounded explanation. Each instance is an executable workspace containing business documents, structured data, optional code artifacts, solver outputs, and task-specific evaluators distributed across interdependent files. OR-Space defines three task modes: Build, where agents construct solver-ready optimization models from heterogeneous artifacts; Revise, where agents modify existing models under changing requirements or solver feedback while preserving valid prior logic; and Explain, where agents answer grounded questions about solutions, constraints, and business implications using evidence spread across workspace artifacts. By combining persistent workspaces with lifecycle-oriented tasks, OR-Space evaluates whether agents can perform reliable optimization work beyond end-to-end text generation. We describe the benchmark design, evaluation protocol, and quality-control pipeline, and position OR-Space as a benchmark for studying the reliability, failure modes, and practical readiness of LLM agents in industrial OR workflows.

This paper introduces SCHEDBench, a natural-language benchmark for evaluating combinatorial scheduling constraint faithfulness under surface-form variation. Grounded in canonical scheduling instances and solver-derived feasibility and optimality, SCHEDBench assesses whether large language models (LLMs) generate schedules with the same constraint-feasible behavior across varied natural-language (NL) surface forms. SCHEDBench spans 1,132 instances across job-shop scheduling problems (JSP), single and multi-mode resource-constrained project scheduling problems (RCPSP), nurse rostering/scheduling, and curriculum timetabling problems of varying difficulty. Instances are templated into natural language problems using domain-specific templates, themed entities, lexical-syntactic template rephrasing, and constraint-level surface-form variation, with reference solutions verified for feasibility and objective optimality. Across thirteen frontier and open-weight LLMs, we find that models are not reliably invariant to semantically equivalent renderings of the same scheduling problem. Surface-form variation reduces feasibility and induces above-noise shifts in per-instance hard-constraint violations on matched instances. Among the tested isolated axes, constraint reordering yields the clearest above-noise sensitivity.

This research investigates how Machine Learning (ML) algorithms can assist in workload allocation strategies by detecting tasks with node affinity operators (referred to as constraint operators), which constrain their execution to a limited number of nodes. Using real-world Google Cluster Data (GCD) workload traces and the AGOCS framework, the study extracts node attributes and task constraints, then analyses them to identify suitable node-task pairings. It focuses on tasks that can be executed on either a single node or fewer than a thousand out of 12.5k nodes in the analysed GCD cluster. Task constraint operators are compacted, pre-processed with one-hot encoding, and used as features in a training dataset. Various ML classifiers, including Artificial Neural Networks, K-Nearest Neighbours, Decision Trees, Naive Bayes, Ridge Regression, Adaptive Boosting, and Bagging, are fine-tuned and assessed for accuracy and F1-scores. The final ensemble voting classifier model achieved 98% accuracy and a 1.5-1.8% misclassification rate for tasks with a single suitable node.

Distributed applications employ Kubernetes for scalable, fault-tolerant deployments over computer clusters, where application components run in groups of containers called pods. The scheduler, at the heart of Kubernetes' architecture, determines the placement of pods given their priority and resource requirements on cluster nodes. To quickly allocate pods, the scheduler uses lightweight heuristics that can lead to suboptimal placements and resource fragmentation, preventing allocations of otherwise deployable pods on the available nodes. We propose the usage of constraint programming to find the optimal allocation of pods satisfying all their priorities and resource requests. Implementation-wise, our solution comes as a plug-in to the default scheduler that operates as a fallback mechanism when some pods cannot be allocated. Using the OR-Tools constraint solver, our experiments on small-to-mid-sized clusters indicate that, within a 1-second scheduling window, our approach places more higher-priority pods than the default scheduler (possibly demonstrating allocation optimality) in over 44\% of realisable allocation scenarios where the default scheduler fails, while certifying that the default scheduler's placement is already optimal in over 19\% of scenarios. With a 10-second window, our approach improves placements in over 73\% and still certifies that the default scheduler's placement is already optimal in over 19\% of scenarios.

Increasingly sophisticated mathematical modelling processes from Machine Learning are being used to analyse complex data. However, the performance and explainability of these models within practical critical systems requires a rigorous and continuous verification of their safe utilisation. Working towards addressing this challenge, this paper presents a principled novel safety argument framework for critical systems that utilise deep neural networks. The approach allows various forms of predictions, e.g., future reliability of passing some demands, or confidence on a required reliability level. It is supported by a Bayesian analysis using operational data and the recent verification and validation techniques for deep learning. The prediction is conservative -- it starts with partial prior knowledge obtained from lifecycle activities and then determines the worst-case prediction. Open challenges are also identified.

We present a flow-based approach to the optimal transport (OT) problem between two continuous distributions pi_0,pi_1 on R^d, of minimizing a transport cost E[c(X_1-X_0)] in the set of couplings (X_0,X_1) whose marginal distributions on X_0,X_1 equals pi_0,pi_1, respectively, where c is a cost function. Our method iteratively constructs a sequence of neural ordinary differentiable equations (ODE), each learned by solving a simple unconstrained regression problem, which monotonically reduce the transport cost while automatically preserving the marginal constraints. This yields a monotonic interior approach that traverses inside the set of valid couplings to decrease the transport cost, which distinguishes itself from most existing approaches that enforce the coupling constraints from the outside. The main idea of the method draws from rectified flow, a recent approach that simultaneously decreases the whole family of transport costs induced by convex functions c (and is hence multi-objective in nature), but is not tailored to minimize a specific transport cost. Our method is a single-object variant of rectified flow that guarantees to solve the OT problem for a fixed, user-specified convex cost function c.

Modern deployments require LLMs to enforce safety policies at scale, yet many controls rely on inference-time interventions that add recurring compute cost and serving complexity. Activation steering is widely used, but it requires runtime hooks and scales cost with the number of generations; conditional variants improve selectivity by gating when steering is applied but still retain an inference-time control path. We ask whether selective refusal can be moved entirely offline: can a mechanistic understanding of category-specific refusal be distilled into a circuit-restricted weight update that deploys as a standard checkpoint? We propose C-Δθ: Circuit Restricted Weight Arithmetic, which (i) localizes refusal-causal computation as a sparse circuit using EAP-IG and (ii) computes a constrained weight update ΔθC supported only on that circuit (typically <5% of parameters). Applying ΔθC yields a drop-in edited checkpoint with no inference-time hooks, shifting cost from per-request intervention to a one-time offline update. We evaluate category-targeted selectivity and capability retention on refusal and utility benchmarks.

We investigate safe multi-agent reinforcement learning, where agents seek to collectively maximize an aggregate sum of local objectives while satisfying their own safety constraints. The objective and constraints are described by {\it general utilities}, i.e., nonlinear functions of the long-term state-action occupancy measure, which encompass broader decision-making goals such as risk, exploration, or imitations. The exponential growth of the state-action space size with the number of agents presents challenges for global observability, further exacerbated by the global coupling arising from agents' safety constraints. To tackle this issue, we propose a primal-dual method utilizing shadow reward and κ-hop neighbor truncation under a form of correlation decay property, where κ is the communication radius. In the exact setting, our algorithm converges to a first-order stationary point (FOSP) at the rate of Oleft(T^{-2/3}right). In the sample-based setting, we demonstrate that, with high probability, our algorithm requires mathcal{O}left(ε^{-3.5}right) samples to achieve an ε-FOSP with an approximation error of O(φ_0^{2κ}), where φ_0in (0,1). Finally, we demonstrate the effectiveness of our model through extensive numerical experiments.

We study the computational complexity of approximating general constrained Markov decision processes. Our primary contribution is the design of a polynomial time (0,ε)-additive bicriteria approximation algorithm for finding optimal constrained policies across a broad class of recursively computable constraints, including almost-sure, chance, expectation, and their anytime variants. Matching lower bounds imply our approximation guarantees are optimal so long as P neq NP. The generality of our approach results in answers to several long-standing open complexity questions in the constrained reinforcement learning literature. Specifically, we are the first to prove polynomial-time approximability for the following settings: policies under chance constraints, deterministic policies under multiple expectation constraints, policies under non-homogeneous constraints (i.e., constraints of different types), and policies under constraints for continuous-state processes.

This paper proposes a novel column generation framework for combinatorial software testing. In particular, it combines Mathematical Programming and Constraint Programming in a hybrid decomposition to generate covering arrays. The approach allows generating parameterized test cases with coverage guarantees between parameter interactions of a given application. Compared to exhaustive testing, combinatorial test case generation reduces the number of tests to run significantly. Our column generation algorithm is generic and can accommodate mixed coverage arrays over heterogeneous alphabets. The algorithm is realized in practice as a cloud service and recognized as one of the five winners of the company-wide cloud application challenge at Oracle. The service is currently helping software developers from a range of different product teams in their testing efforts while exposing declarative constraint models and hybrid optimization techniques to a broader audience.

Sequential decision-making problems with multiple objectives arise naturally in practice and pose unique challenges for research in decision-theoretic planning and learning, which has largely focused on single-objective settings. This article surveys algorithms designed for sequential decision-making problems with multiple objectives. Though there is a growing body of literature on this subject, little of it makes explicit under what circumstances special methods are needed to solve multi-objective problems. Therefore, we identify three distinct scenarios in which converting such a problem to a single-objective one is impossible, infeasible, or undesirable. Furthermore, we propose a taxonomy that classifies multi-objective methods according to the applicable scenario, the nature of the scalarization function (which projects multi-objective values to scalar ones), and the type of policies considered. We show how these factors determine the nature of an optimal solution, which can be a single policy, a convex hull, or a Pareto front. Using this taxonomy, we survey the literature on multi-objective methods for planning and learning. Finally, we discuss key applications of such methods and outline opportunities for future work.

Character animation in real-world scenarios necessitates a variety of constraints, such as trajectories, key-frames, interactions, etc. Existing methodologies typically treat single or a finite set of these constraint(s) as separate control tasks. They are often specialized, and the tasks they address are rarely extendable or customizable. We categorize these as solutions to the close-set motion control problem. In response to the complexity of practical motion control, we propose and attempt to solve the open-set motion control problem. This problem is characterized by an open and fully customizable set of motion control tasks. To address this, we introduce a new paradigm, programmable motion generation. In this paradigm, any given motion control task is broken down into a combination of atomic constraints. These constraints are then programmed into an error function that quantifies the degree to which a motion sequence adheres to them. We utilize a pre-trained motion generation model and optimize its latent code to minimize the error function of the generated motion. Consequently, the generated motion not only inherits the prior of the generative model but also satisfies the required constraints. Experiments show that we can generate high-quality motions when addressing a wide range of unseen tasks. These tasks encompass motion control by motion dynamics, geometric constraints, physical laws, interactions with scenes, objects or the character own body parts, etc. All of these are achieved in a unified approach, without the need for ad-hoc paired training data collection or specialized network designs. During the programming of novel tasks, we observed the emergence of new skills beyond those of the prior model. With the assistance of large language models, we also achieved automatic programming. We hope that this work will pave the way for the motion control of general AI agents.

Multi-agent systems (MAS) composed of large language models often exhibit improved problem-solving performance despite operating on identical information. In this work, we provide a formal explanation for this phenomenon grounded in operator theory and constrained optimization. We model each agent as enforcing a distinct family of validity constraints on a shared solution state, and show that a MAS implements a factorized composition of constraint-enforcement operators. Under mild conditions, these dynamics converge to invariant solution sets defined by the intersection of agent constraint sets. Such invariant structures are generally not dynamically accessible to a single agent applying all constraints simultaneously, even when expressive capacity and information are identical. We extend this result from exact constraint enforcement to soft constraints via proximal operators, and apply the formalism to contemporary text-based dialog systems.

Long-running Large Language Model (LLM)-based agents often accumulate large intermediate traces containing audits, eliminations, and numeric calculations. In practice, this state is compressed before handing it to a downstream decision step, creating an information bottleneck in which small omissions can break strict numeric or categorical constraints. This paper evaluates hand-off compression in a closed-world travel-planning relay with two LLM agents. A Researcher audits a fixed inventory of hotels and flights for 50 goal instances, and a Booker selects a hotel--flight pair using only the goal and the hand-off payload, with the inventory withheld. We compare four hand-off conditions: no compression, narrative summarization, schema-constrained JSON extraction, and embedding-based pruning. Exhaustive enumeration over the fixed inventory provides exact feasible and optimal labels. Results show that hand-off representation strongly affects downstream feasibility under a small decision model. JSON extraction achieves the highest feasibility accuracy at 0.96, while narrative summarization, despite producing the smallest compressed hand-off payload, degrades feasibility to 0.48. Embedding-based pruning matches the uncompressed control on feasibility at 0.88 without an additional generative compression call. These findings indicate that constraint checking benefits from structured and auditable hand-off representations rather than relying on brevity alone.

The problem of optimal sizing and power scheduling in microgrids subject to uncertainties is well known to the control community. Commonly, the optimal control problem is cast as a mixed-integer program to model the logical constraints arising in energy storage systems, and is then solved approximately using numerical methods such as the scenario approach. In this paper, we propose and compare two formulations of a robust microgrid sizing and power scheduling optimal control problem with logical constraints and uncertainties in the user's power demand, solar power generation, grid electricity prices and battery efficiencies. The first formulation uses binary variables and big-M constraints, leading to a mixed-integer linear program. The second formulation casts the problem as a continuous nonlinear program through an exact smooth reformulation of the logical constraints, consisting of additional modelling variables and non-convex constraints. We then propose a novel local reduction algorithm, extending an existing method, to solve both problems. The two formulations are compared by evaluating the solutions returned by local reduction using 100,000-sample Monte Carlo simulations and achieve promising results, with both averaging feasibility rates above 90%.

We address the problem of finite-horizon control of a discrete-time linear system, where the initial state distribution follows a Gaussian mixture model, the terminal state must follow a specified Gaussian distribution, and the state and control inputs must obey chance constraints. We show that, throughout the time horizon, the state and control distributions are fully characterized by Gaussian mixtures. We then formulate the cost, distributional terminal constraint, and affine/2-norm chance constraints on the state and control, as convex functions of the decision variables. This is leveraged to formulate the chance-constrained path planning problem as a single convex optimization problem. A numerical example demonstrates the effectiveness of the proposed method.

Enterprise Resource Planning (ERP) systems record transactions reliably but still delegate almost all operational decision-making to human specialists, because classical rule-based automation cannot reason about exceptions and monolithic AI assistants degrade when asked to coordinate across functional boundaries. This paper presents Agentic ERP, an expert-system architecture that combines role-aligned large-language-model (LLM) agents with a risk-tiered human-in-the-loop harness and a graph-based orchestrator to execute end-to-end business workflows on a production ERP backend. First, autonomous ERP operation is formulated as a constrained sequential-decision problem over a structured enterprise state, with a decomposition argument linking role-aligned agents to a measurable reduction in per-step tool-selection complexity. Second, a graph-based Planner--Executor--Reflector--Responder orchestration decouples generation from evaluation through externalised grading criteria and sprint contracts, packaging recent harness-engineering principles as inspectable expert-system artefacts. Third, the system is evaluated at three levels: a scenario-based task suite, a comprehensive comparison of six orchestration paradigms on cross-functional crisis tasks, and a 365-day agent-in-the-loop simulation against rule-based RPA and no-intervention baselines. Across these levels the proposed multi-agent method is significantly better than the baseline, and the system sustains a simulated year of operation with zero stockouts while the rule-based baseline accumulates hundreds under the same demand stream. The work shows that role-aligned LLM agents under human oversight can move an ERP system from passively recording transactions to actively executing operational decisions, and it provides a reference architecture and an evaluation protocol for autonomous enterprise resource planning.

We consider the linear contextual bandit problem with resource consumption, in addition to reward generation. In each round, the outcome of pulling an arm is a reward as well as a vector of resource consumptions. The expected values of these outcomes depend linearly on the context of that arm. The budget/capacity constraints require that the total consumption doesn't exceed the budget for each resource. The objective is once again to maximize the total reward. This problem turns out to be a common generalization of classic linear contextual bandits (linContextual), bandits with knapsacks (BwK), and the online stochastic packing problem (OSPP). We present algorithms with near-optimal regret bounds for this problem. Our bounds compare favorably to results on the unstructured version of the problem where the relation between the contexts and the outcomes could be arbitrary, but the algorithm only competes against a fixed set of policies accessible through an optimization oracle. We combine techniques from the work on linContextual, BwK, and OSPP in a nontrivial manner while also tackling new difficulties that are not present in any of these special cases.

Solving problems through tool use under explicit constraints constitutes a highly challenging yet unavoidable scenario for large language models (LLMs), requiring capabilities such as function calling, instruction following, and self-refinement. However, progress has been hindered by the absence of dedicated evaluations. To address this, we introduce CCTU, a benchmark for evaluating LLM tool use under complex constraints. CCTU is grounded in a taxonomy of 12 constraint categories spanning four dimensions (i.e., resource, behavior, toolset, and response). The benchmark comprises 200 carefully curated and challenging test cases across diverse tool-use scenarios, each involving an average of seven constraint types and an average prompt length exceeding 4,700 tokens. To enable reliable evaluation, we develop an executable constraint validation module that performs step-level validation and enforces compliance during multi-turn interactions between models and their environments. We evaluate nine state-of-the-art LLMs in both thinking and non-thinking modes. Results indicate that when strict adherence to all constraints is required, no model achieves a task completion rate above 20%. Further analysis reveals that models violate constraints in over 50% of cases, particularly in the resource and response dimensions. Moreover, LLMs demonstrate limited capacity for self-refinement even after receiving detailed feedback on constraint violations, highlighting a critical bottleneck in the development of robust tool-use agents. To facilitate future research, we release the data and code.

In this report we describe the development of Command A, a powerful large language model purpose-built to excel at real-world enterprise use cases. Command A is an agent-optimised and multilingual-capable model, with support for 23 languages of global business, and a novel hybrid architecture balancing efficiency with top of the range performance. It offers best-in-class Retrieval Augmented Generation (RAG) capabilities with grounding and tool use to automate sophisticated business processes. These abilities are achieved through a decentralised training approach, including self-refinement algorithms and model merging techniques. We also include results for Command R7B which shares capability and architectural similarities to Command A. Weights for both models have been released for research purposes. This technical report details our original training pipeline and presents an extensive evaluation of our models across a suite of enterprise-relevant tasks and public benchmarks, demonstrating excellent performance and efficiency.

Representing robotic manipulation tasks as constraints that associate the robot and the environment is a promising way to encode desired robot behaviors. However, it remains unclear how to formulate the constraints such that they are 1) versatile to diverse tasks, 2) free of manual labeling, and 3) optimizable by off-the-shelf solvers to produce robot actions in real-time. In this work, we introduce Relational Keypoint Constraints (ReKep), a visually-grounded representation for constraints in robotic manipulation. Specifically, ReKep is expressed as Python functions mapping a set of 3D keypoints in the environment to a numerical cost. We demonstrate that by representing a manipulation task as a sequence of Relational Keypoint Constraints, we can employ a hierarchical optimization procedure to solve for robot actions (represented by a sequence of end-effector poses in SE(3)) with a perception-action loop at a real-time frequency. Furthermore, in order to circumvent the need for manual specification of ReKep for each new task, we devise an automated procedure that leverages large vision models and vision-language models to produce ReKep from free-form language instructions and RGB-D observations. We present system implementations on a wheeled single-arm platform and a stationary dual-arm platform that can perform a large variety of manipulation tasks, featuring multi-stage, in-the-wild, bimanual, and reactive behaviors, all without task-specific data or environment models. Website at https://rekep-robot.github.io/.

Optimal operation of chemical processes is vital for energy, resource, and cost savings in chemical engineering. The problem of optimal operation can be tackled with reinforcement learning, but traditional reinforcement learning methods face challenges due to hard constraints related to quality and safety that must be strictly satisfied, and the large amount of required training data. Chemical processes often cannot provide sufficient experimental data, and while detailed dynamic models can be an alternative, their complexity makes it computationally intractable to generate the needed data. Optimal control methods, such as model predictive control, also struggle with the complexity of the underlying dynamic models. Consequently, many chemical processes rely on manually defined operation recipes combined with simple linear controllers, leading to suboptimal performance and limited flexibility. In this work, we propose a novel approach that leverages expert knowledge embedded in operation recipes. By using reinforcement learning to optimize the parameters of these recipes and their underlying linear controllers, we achieve an optimized operation recipe. This method requires significantly less data, handles constraints more effectively, and is more interpretable than traditional reinforcement learning methods due to the structured nature of the recipes. We demonstrate the potential of our approach through simulation results of an industrial batch polymerization reactor, showing that it can approach the performance of optimal controllers while addressing the limitations of existing methods.

Machine learning models are often trained to predict the outcome resulting from a human decision. For example, if a doctor decides to test a patient for disease, will the patient test positive? A challenge is that historical decision-making determines whether the outcome is observed: we only observe test outcomes for patients doctors historically tested. Untested patients, for whom outcomes are unobserved, may differ from tested patients along observed and unobserved dimensions. We propose a Bayesian model class which captures this setting. The purpose of the model is to accurately estimate risk for both tested and untested patients. Estimating this model is challenging due to the wide range of possibilities for untested patients. To address this, we propose two domain constraints which are plausible in health settings: a prevalence constraint, where the overall disease prevalence is known, and an expertise constraint, where the human decision-maker deviates from purely risk-based decision-making only along a constrained feature set. We show theoretically and on synthetic data that domain constraints improve parameter inference. We apply our model to a case study of cancer risk prediction, showing that the model's inferred risk predicts cancer diagnoses, its inferred testing policy captures known public health policies, and it can identify suboptimalities in test allocation. Though our case study is in healthcare, our analysis reveals a general class of domain constraints which can improve model estimation in many settings.

Real-world instructions with multiple constraints pose a significant challenge to existing large language models (LLMs). An observation is that the LLMs exhibit dramatic performance fluctuation when disturbing the order of the incorporated constraints. Yet, none of the existing works has systematically investigated this position bias problem in the field of multi-constraint instruction following. To bridge this gap, we design a probing task where we quantitatively measure the difficulty distribution of the constraints by a novel Difficulty Distribution Index (CDDI). Through the experimental results, we find that LLMs are more performant when presented with the constraints in a ``hard-to-easy'' order. This preference can be generalized to LLMs with different architecture or different sizes of parameters. Additionally, we conduct an explanation study, providing an intuitive insight into the correlation between the LLM's attention and constraint orders. Our code and dataset are publicly available at https://github.com/meowpass/PBIF.

With the widespread adoption of machine learning systems, the need to curtail their behavior has become increasingly apparent. This is evidenced by recent advancements towards developing models that satisfy robustness, safety, and fairness requirements. These requirements can be imposed (with generalization guarantees) by formulating constrained learning problems that can then be tackled by dual ascent algorithms. Yet, though these algorithms converge in objective value, even in non-convex settings, they cannot guarantee that their outcome is feasible. Doing so requires randomizing over all iterates, which is impractical in virtually any modern applications. Still, final iterates have been observed to perform well in practice. In this work, we address this gap between theory and practice by characterizing the constraint violation of Lagrangian minimizers associated with optimal dual variables, despite lack of convexity. To do this, we leverage the fact that non-convex, finite-dimensional constrained learning problems can be seen as parametrizations of convex, functional problems. Our results show that rich parametrizations effectively mitigate the issue of feasibility in dual methods, shedding light on prior empirical successes of dual learning. We illustrate our findings in fair learning tasks.

Large language models are shifting from passive information providers to active agents intended for complex workflows. However, their deployment as reliable AI workers in enterprise is stalled by benchmarks that fail to capture the intricacies of professional environments, specifically, the need for long-horizon planning amidst persistent state changes and strict access protocols. In this work, we introduce EnterpriseOps-Gym, a benchmark designed to evaluate agentic planning in realistic enterprise settings. Specifically, EnterpriseOps-Gym features a containerized sandbox with 164 database tables and 512 functional tools to mimic real-world search friction. Within this environment, agents are evaluated on 1,150 expert-curated tasks across eight mission-critical verticals (including Customer Service, HR, and IT). Our evaluation of 14 frontier models reveals critical limitations in state-of-the-art models: the top-performing Claude Opus 4.5 achieves only 37.4% success. Further analysis shows that providing oracle human plans improves performance by 14-35 percentage points, pinpointing strategic reasoning as the primary bottleneck. Additionally, agents frequently fail to refuse infeasible tasks (best model achieves 53.9%), leading to unintended and potentially harmful side effects. Our findings underscore that current agents are not yet ready for autonomous enterprise deployment. More broadly, EnterpriseOps-Gym provides a concrete testbed to advance the robustness of agentic planning in professional workflows.

This paper considers the problem of combinatorial multi-armed bandits with semi-bandit feedback and a cardinality constraint on the super-arm size. Existing algorithms for solving this problem typically involve two key sub-routines: (1) a parameter estimation routine that sequentially estimates a set of base-arm parameters, and (2) a super-arm selection policy for selecting a subset of base arms deemed optimal based on these parameters. State-of-the-art algorithms assume access to an exact oracle for super-arm selection with unbounded computational power. At each instance, this oracle evaluates a list of score functions, the number of which grows as low as linearly and as high as exponentially with the number of arms. This can be prohibitive in the regime of a large number of arms. This paper introduces a novel realistic alternative to the perfect oracle. This algorithm uses a combination of group-testing for selecting the super arms and quantized Thompson sampling for parameter estimation. Under a general separability assumption on the reward function, the proposed algorithm reduces the complexity of the super-arm-selection oracle to be logarithmic in the number of base arms while achieving the same regret order as the state-of-the-art algorithms that use exact oracles. This translates to at least an exponential reduction in complexity compared to the oracle-based approaches.