Daily Papers

Despite the significant progress made by deep models in various image restoration tasks, existing image restoration networks still face challenges in terms of task generality. An intuitive manifestation is that networks which excel in certain tasks often fail to deliver satisfactory results in others. To illustrate this point, we select five representative networks and conduct a comparative study on five classic image restoration tasks. First, we provide a detailed explanation of the characteristics of different image restoration tasks and backbone networks. Following this, we present the benchmark results and analyze the reasons behind the performance disparity of different models across various tasks. Drawing from this comparative study, we propose that a general image restoration backbone network needs to meet the functional requirements of diverse tasks. Based on this principle, we design a new general image restoration backbone network, X-Restormer. Extensive experiments demonstrate that X-Restormer possesses good task generality and achieves state-of-the-art performance across a variety of tasks.

The Mamba-based image restoration backbones have recently demonstrated significant potential in balancing global reception and computational efficiency. However, the inherent causal modeling limitation of Mamba, where each token depends solely on its predecessors in the scanned sequence, restricts the full utilization of pixels across the image and thus presents new challenges in image restoration. In this work, we propose MambaIRv2, which equips Mamba with the non-causal modeling ability similar to ViTs to reach the attentive state space restoration model. Specifically, the proposed attentive state-space equation allows to attend beyond the scanned sequence and facilitate image unfolding with just one single scan. Moreover, we further introduce a semantic-guided neighboring mechanism to encourage interaction between distant but similar pixels. Extensive experiments show our MambaIRv2 outperforms SRFormer by even 0.35dB PSNR for lightweight SR even with 9.3\% less parameters and suppresses HAT on classic SR by up to 0.29dB. Code is available at https://github.com/csguoh/MambaIR.

While deep learning-based methods for blind face restoration have achieved unprecedented success, they still suffer from two major limitations. First, most of them deteriorate when facing complex degradations out of their training data. Second, these methods require multiple constraints, e.g., fidelity, perceptual, and adversarial losses, which require laborious hyper-parameter tuning to stabilize and balance their influences. In this work, we propose a novel method named DifFace that is capable of coping with unseen and complex degradations more gracefully without complicated loss designs. The key of our method is to establish a posterior distribution from the observed low-quality (LQ) image to its high-quality (HQ) counterpart. In particular, we design a transition distribution from the LQ image to the intermediate state of a pre-trained diffusion model and then gradually transmit from this intermediate state to the HQ target by recursively applying a pre-trained diffusion model. The transition distribution only relies on a restoration backbone that is trained with L_2 loss on some synthetic data, which favorably avoids the cumbersome training process in existing methods. Moreover, the transition distribution can contract the error of the restoration backbone and thus makes our method more robust to unknown degradations. Comprehensive experiments show that DifFace is superior to current state-of-the-art methods, especially in cases with severe degradations. Our code and model are available at https://github.com/zsyOAOA/DifFace.

Recent years have witnessed great progress in image restoration thanks to the advancements in modern deep neural networks e.g. Convolutional Neural Network and Transformer. However, existing restoration backbones are usually limited due to the inherent local reductive bias or quadratic computational complexity. Recently, Selective Structured State Space Model e.g., Mamba, has shown great potential for long-range dependencies modeling with linear complexity, but it is still under-explored in low-level computer vision. In this work, we introduce a simple but strong benchmark model, named MambaIR, for image restoration. In detail, we propose the Residual State Space Block as the core component, which employs convolution and channel attention to enhance the capabilities of the vanilla Mamba. In this way, our MambaIR takes advantage of local patch recurrence prior as well as channel interaction to produce restoration-specific feature representation. Extensive experiments demonstrate the superiority of our method, for example, MambaIR outperforms Transformer-based baseline SwinIR by up to 0.36dB, using similar computational cost but with a global receptive field. Code is available at https://github.com/csguoh/MambaIR.

Video imaging is often affected by complex degradations such as blur, noise, and compression artifacts. Traditional restoration methods follow a "single-task single-model" paradigm, resulting in poor generalization and high computational cost, limiting their applicability in real-world scenarios with diverse degradation types. We propose UniFlowRestore, a general video restoration framework that models restoration as a time-continuous evolution under a prompt-guided and physics-informed vector field. A physics-aware backbone PhysicsUNet encodes degradation priors as potential energy, while PromptGenerator produces task-relevant prompts as momentum. These components define a Hamiltonian system whose vector field integrates inertial dynamics, decaying physical gradients, and prompt-based guidance. The system is optimized via a fixed-step ODE solver to achieve efficient and unified restoration across tasks. Experiments show that UniFlowRestore delivers stateof-the-art performance with strong generalization and efficiency. Quantitative results demonstrate that UniFlowRestore achieves state-of-the-art performance, attaining the highest PSNR (33.89 dB) and SSIM (0.97) on the video denoising task, while maintaining top or second-best scores across all evaluated tasks.

Most deraining works focus on rain streaks removal but they cannot deal adequately with heavy rain images. In heavy rain, streaks are strongly visible, dense rain accumulation or rain veiling effect significantly washes out the image, further scenes are relatively more blurry, etc. In this paper, we propose a novel method to address these problems. We put forth a 2-stage network: a physics-based backbone followed by a depth-guided GAN refinement. The first stage estimates the rain streaks, the transmission, and the atmospheric light governed by the underlying physics. To tease out these components more reliably, a guided filtering framework is used to decompose the image into its low- and high-frequency components. This filtering is guided by a rain-free residue image --- its content is used to set the passbands for the two channels in a spatially-variant manner so that the background details do not get mixed up with the rain-streaks. For the second stage, the refinement stage, we put forth a depth-guided GAN to recover the background details failed to be retrieved by the first stage, as well as correcting artefacts introduced by that stage. We have evaluated our method against the state of the art methods. Extensive experiments show that our method outperforms them on real rain image data, recovering visually clean images with good details.

Non-local attention module has been proven to be crucial for image restoration. Conventional non-local attention processes features of each layer separately, so it risks missing correlation between features among different layers. To address this problem, we aim to design attention modules that aggregate information from different layers. Instead of finding correlated key pixels within the same layer, each query pixel is encouraged to attend to key pixels at multiple previous layers of the network. In order to efficiently embed such attention design into neural network backbones, we propose a novel Adaptive Cross-Layer Attention (ACLA) module. Two adaptive designs are proposed for ACLA: (1) adaptively selecting the keys for non-local attention at each layer; (2) automatically searching for the insertion locations for ACLA modules. By these two adaptive designs, ACLA dynamically selects a flexible number of keys to be aggregated for non-local attention at previous layer while maintaining a compact neural network with compelling performance. Extensive experiments on image restoration tasks, including single image super-resolution, image denoising, image demosaicing, and image compression artifacts reduction, validate the effectiveness and efficiency of ACLA. The code of ACLA is available at https://github.com/SDL-ASU/ACLA.

Recent state-of-the-art image restoration methods mostly adopt latent diffusion models with U-Net backbones, yet still facing challenges in achieving high-quality restoration due to their limited capabilities. Diffusion transformers (DiTs), like SD3, are emerging as a promising alternative because of their better quality with scalability. In this paper, we introduce DPIR (Dual Prompting Image Restoration), a novel image restoration method that effectivly extracts conditional information of low-quality images from multiple perspectives. Specifically, DPIR consits of two branches: a low-quality image conditioning branch and a dual prompting control branch. The first branch utilizes a lightweight module to incorporate image priors into the DiT with high efficiency. More importantly, we believe that in image restoration, textual description alone cannot fully capture its rich visual characteristics. Therefore, a dual prompting module is designed to provide DiT with additional visual cues, capturing both global context and local appearance. The extracted global-local visual prompts as extra conditional control, alongside textual prompts to form dual prompts, greatly enhance the quality of the restoration. Extensive experimental results demonstrate that DPIR delivers superior image restoration performance.

Universal image restoration (UIR) aims to recover images degraded by unknown mixtures while preserving semantics -- conditions under which discriminative restorers and UNet-based diffusion priors often oversmooth, hallucinate, or drift. We present LucidFlux, a caption-free UIR framework that adapts a large diffusion transformer (Flux.1) without image captions. LucidFlux introduces a lightweight dual-branch conditioner that injects signals from the degraded input and a lightly restored proxy to respectively anchor geometry and suppress artifacts. Then, a timestep- and layer-adaptive modulation schedule is designed to route these cues across the backbone's hierarchy, in order to yield coarse-to-fine and context-aware updates that protect the global structure while recovering texture. After that, to avoid the latency and instability of text prompts or MLLM captions, we enforce caption-free semantic alignment via SigLIP features extracted from the proxy. A scalable curation pipeline further filters large-scale data for structure-rich supervision. Across synthetic and in-the-wild benchmarks, LucidFlux consistently outperforms strong open-source and commercial baselines, and ablation studies verify the necessity of each component. LucidFlux shows that, for large DiTs, when, where, and what to condition on -- rather than adding parameters or relying on text prompts -- is the governing lever for robust and caption-free universal image restoration in the wild.

Unified image restoration (UIR) aims to recover high-quality (HQ) content from low-quality (LQ) images with different degradations using a single model. Most recent methods adapt large pretrained text-to-image (T2I) latent diffusion models for their strong capacity and generative priors. However, the variational autoencoder (VAE) in latent T2I models may discard restoration-sensitive details, while the open-ended synthesis prior can introduce content-inconsistent artifacts. We present PixRestore, a VAE-free pixel-space Diffusion Transformer (DiT) for UIR, where the diffusion backbone is trained entirely from scratch, without relying on T2I pretraining. PixRestore performs flow matching directly on patchified pixels, preserving fine-grained details while keeping the token sequence tractable. To adapt to different degradations, PixRestore learns to predict the reliability of layer features using LQ--HQ DINO feature similarity. Features from more reliable layers are fused as dense conditioning, while less reliable layers receive stronger HQ-feature supervision to encourage degradation removal. We train PixRestore on a large-scale corpus of diverse scenes and degradations, and further finetune it into a one-step generator using DINO-based adversarial objectives for efficient inference. Experiments on public benchmarks and real-world test sets show that, with only about 50M parameters and single-step inference, PixRestore achieves the best overall fidelity, perceptual quality, and robustness to degradations among competing UIR models while being far more efficient. Larger PixRestore variants can further boost performance, demonstrating the scalability of our pixel-space design. Code and the curated benchmark can be found at https://github.com/csslc/PixRestore.

Blind all-in-one image restoration models aim to recover a high-quality image from an input degraded with unknown distortions. However, these models require all the possible degradation types to be defined during the training stage while showing limited generalization to unseen degradations, which limits their practical application in complex cases. In this paper, we propose a simple but effective adaptive blind all-in-one restoration (ABAIR) model, which can address multiple degradations, generalizes well to unseen degradations, and efficiently incorporate new degradations by training a small fraction of parameters. First, we train our baseline model on a large dataset of natural images with multiple synthetic degradations, augmented with a segmentation head to estimate per-pixel degradation types, resulting in a powerful backbone able to generalize to a wide range of degradations. Second, we adapt our baseline model to varying image restoration tasks using independent low-rank adapters. Third, we learn to adaptively combine adapters to versatile images via a flexible and lightweight degradation estimator. Our model is both powerful in handling specific distortions and flexible in adapting to complex tasks, it not only outperforms the state-of-the-art by a large margin on five- and three-task IR setups, but also shows improved generalization to unseen degradations and also composite distortions.

Image restoration in adverse weather conditions is a difficult task in computer vision. In this paper, we propose a novel transformer-based framework called GridFormer which serves as a backbone for image restoration under adverse weather conditions. GridFormer is designed in a grid structure using a residual dense transformer block, and it introduces two core designs. First, it uses an enhanced attention mechanism in the transformer layer. The mechanism includes stages of the sampler and compact self-attention to improve efficiency, and a local enhancement stage to strengthen local information. Second, we introduce a residual dense transformer block (RDTB) as the final GridFormer layer. This design further improves the network's ability to learn effective features from both preceding and current local features. The GridFormer framework achieves state-of-the-art results on five diverse image restoration tasks in adverse weather conditions, including image deraining, dehazing, deraining & dehazing, desnowing, and multi-weather restoration. The source code and pre-trained models will be released.

Single-image human reconstruction is vital for digital human modeling applications but remains an extremely challenging task. Current approaches rely on generative models to synthesize multi-view images for subsequent 3D reconstruction and animation. However, directly generating multiple views from a single human image suffers from geometric inconsistencies, resulting in issues like fragmented or blurred limbs in the reconstructed models. To tackle these limitations, we introduce HumanDreamer-X, a novel framework that integrates multi-view human generation and reconstruction into a unified pipeline, which significantly enhances the geometric consistency and visual fidelity of the reconstructed 3D models. In this framework, 3D Gaussian Splatting serves as an explicit 3D representation to provide initial geometry and appearance priority. Building upon this foundation, HumanFixer is trained to restore 3DGS renderings, which guarantee photorealistic results. Furthermore, we delve into the inherent challenges associated with attention mechanisms in multi-view human generation, and propose an attention modulation strategy that effectively enhances geometric details identity consistency across multi-view. Experimental results demonstrate that our approach markedly improves generation and reconstruction PSNR quality metrics by 16.45% and 12.65%, respectively, achieving a PSNR of up to 25.62 dB, while also showing generalization capabilities on in-the-wild data and applicability to various human reconstruction backbone models.

Cross-view geo-localization in GNSS-denied environments aims to determine an unknown location by matching drone-view images with the correct geo-tagged satellite-view images from a large gallery. Recent research shows that learning discriminative image representations under specific weather conditions can significantly enhance performance. However, the frequent occurrence of unseen extreme weather conditions hinders progress. This paper introduces MCGF, a Multi-weather Cross-view Geo-localization Framework designed to dynamically adapt to unseen weather conditions. MCGF establishes a joint optimization between image restoration and geo-localization using denoising diffusion models. For image restoration, MCGF incorporates a shared encoder and a lightweight restoration module to help the backbone eliminate weather-specific information. For geo-localization, MCGF uses EVA-02 as a backbone for feature extraction, with cross-entropy loss for training and cosine distance for testing. Extensive experiments on University160k-WX demonstrate that MCGF achieves competitive results for geo-localization in varying weather conditions.

Historical films suffer from co-occurring visual and audio degradations---blur, noise, flicker, hiss, clipping, and dropout---yet existing methods restore each modality independently, leaving quality gaps and cross-modal inconsistency. We present OmniVR, the first joint audio-video generative restoration model. Built upon a 22B-parameter audio-video generation backbone, OmniVR formulates restoration as conditional generation within a unified multimodal DiT: the low-quality video and audio are encoded as latent conditions, combined with a fixed restoration prompt, and jointly denoised to recover visual structure, temporal motion, and acoustic detail under one coordinated objective. Three key designs enable this adaptation: (1) a joint audio-video degradation pipeline that simulates real old-film characteristics from Internet-collected data; (2) an architecture-preserving text-to-audio-video (T2AV) to audio-video-to-audio-video (AV2AV) transition with prompt annealing that maximally retains the generative prior; and (3) first-frame image-to-video (I2V) anchoring with loss reweighting and waveform supervision for long-video extrapolation and audio fidelity. We also propose OmniVRBench, the first benchmark that evaluates audio-video restoration across visual quality, audio quality, temporal consistency, and audio-visual synchrony on 200 real historical clips. OmniVR surpasses all prior methods on all six visual metrics, achieves the best audio quality, and produces natural colorization---the first method to jointly address all three aspects. Code and weights will be publicly released. Project Page: https://xin1u.github.io/OminiVR_PAGE/

Current instruction-guided video editing models struggle to simultaneously balance precise semantic modifications with faithful motion preservation. While existing approaches rely on injecting explicit external priors (e.g., VLM features or structural conditions) to mitigate these issues, this reliance severely bottlenecks model robustness and generalization. To overcome this limitation, we present SAMA (factorized Semantic Anchoring and Motion Alignment), a framework that factorizes video editing into semantic anchoring and motion modeling. First, we introduce Semantic Anchoring, which establishes a reliable visual anchor by jointly predicting semantic tokens and video latents at sparse anchor frames, enabling purely instruction-aware structural planning. Second, Motion Alignment pre-trains the same backbone on motion-centric video restoration pretext tasks (cube inpainting, speed perturbation, and tube shuffle), enabling the model to internalize temporal dynamics directly from raw videos. SAMA is optimized with a two-stage pipeline: a factorized pre-training stage that learns inherent semantic-motion representations without paired video-instruction editing data, followed by supervised fine-tuning on paired editing data. Remarkably, the factorized pre-training alone already yields strong zero-shot video editing ability, validating the proposed factorization. SAMA achieves state-of-the-art performance among open-source models and is competitive with leading commercial systems (e.g., Kling-Omni). Code, models, and datasets will be released.

In this work, we propose Image-to-Image Rectified Flow Reformulation (I2I-RFR), a practical plug-in reformulation that recasts standard I2I regression networks as continuous-time transport models. While pixel-wise I2I regression is simple, stable, and easy to adapt across tasks, it often over-smooths ill-posed and multimodal targets, whereas generative alternatives often require additional components, task-specific tuning, and more complex training and inference pipelines. Our method augments the backbone input by channel-wise concatenation with a noise-corrupted version of the ground-truth target and optimizes a simple t-reweighted pixel loss. This objective admits a rectified-flow interpretation via an induced velocity field, enabling ODE-based progressive refinement at inference time while largely preserving the standard supervised training pipeline. In most cases, adopting I2I-RFR requires only expanding the input channels, and inference can be performed with a few explicit solver steps (e.g., 3 steps) without distillation. Extensive experiments across multiple image-to-image translation and video restoration tasks show that I2I-RFR generally improves performance across a wide range of tasks and backbones, with particularly clear gains in perceptual quality and detail preservation. Overall, I2I-RFR provides a lightweight way to incorporate continuous-time refinement into conventional I2I models without requiring a heavy generative pipeline.

Accurate estimation of pasture biomass from agricultural imagery is critical for sustainable livestock management, yet existing methods are limited by the small, imbalanced, and sparsely annotated datasets typical of real world monitoring. In this study, adaptation of vision foundation models to agricultural regression is systematically evaluated on the CSIRO Pasture Biomass benchmark, a 357 image dual view dataset with laboratory validated, component wise ground truth for five biomass targets, through 17 configurations spanning four backbones (EfficientNet-B3 to DINOv3-ViT-L), five cross view fusion mechanisms, and a 4x2 metadata factorial. A counterintuitive principle, termed "fusion complexity inversion", is uncovered: on scarce agricultural data, a two layer gated depthwise convolution (R^2 = 0.903) outperforms cross view attention transformers (0.833), bidirectional SSMs (0.819), and full Mamba (0.793, below the no fusion baseline). Backbone pretraining scale is found to monotonically dominate all architectural choices, with the DINOv2 -> DINOv3 upgrade alone yielding +5.0 R^2 points. Training only metadata (species, state, and NDVI) is shown to create a universal ceiling at R^2 ~ 0.829, collapsing an 8.4 point fusion spread to 0.1 points. Actionable guidelines for sparse agricultural benchmarks are established: backbone quality should be prioritized over fusion complexity, local modules preferred over global alternatives, and features unavailable at inference excluded.

In real-world scenarios, image impairments often manifest as composite degradations, presenting a complex interplay of elements such as low light, haze, rain, and snow. Despite this reality, existing restoration methods typically target isolated degradation types, thereby falling short in environments where multiple degrading factors coexist. To bridge this gap, our study proposes a versatile imaging model that consolidates four physical corruption paradigms to accurately represent complex, composite degradation scenarios. In this context, we propose OneRestore, a novel transformer-based framework designed for adaptive, controllable scene restoration. The proposed framework leverages a unique cross-attention mechanism, merging degraded scene descriptors with image features, allowing for nuanced restoration. Our model allows versatile input scene descriptors, ranging from manual text embeddings to automatic extractions based on visual attributes. Our methodology is further enhanced through a composite degradation restoration loss, using extra degraded images as negative samples to fortify model constraints. Comparative results on synthetic and real-world datasets demonstrate OneRestore as a superior solution, significantly advancing the state-of-the-art in addressing complex, composite degradations.

Large vision--language models (VLMs) often use a frozen vision backbone, whose image features are mapped into a large language model through a lightweight connector. While transformer-based encoders are the standard visual backbone, we ask whether state space model (SSM) vision backbones can be a strong alternative. We systematically evaluate SSM vision backbones for VLMs in a controlled setting. Under matched ImageNet-1K initialization, the SSM backbone achieves the strongest overall performance across both VQA and grounding/localization. We further adapt both SSM and ViT-family backbones with detection or segmentation training and find that dense-task tuning generally improves performance across families; after this adaptation, the SSM backbone remains competitive while operating at a substantially smaller model scale. We further observe that (i) higher ImageNet accuracy or larger backbones do not reliably translate into better VLM performance, and (ii) some visual backbones are unstable in localization. Based on these findings, we propose stabilization strategies that improve robustness for both backbone families and highlight SSM backbones as a strong alternative to transformer-based vision encoders in VLMs.

Current popular backbones in computer vision, such as Vision Transformers (ViT) and ResNets are trained to perceive the world from 2D images. However, to more effectively understand 3D structural priors in 2D backbones, we propose Mask3D to leverage existing large-scale RGB-D data in a self-supervised pre-training to embed these 3D priors into 2D learned feature representations. In contrast to traditional 3D contrastive learning paradigms requiring 3D reconstructions or multi-view correspondences, our approach is simple: we formulate a pre-text reconstruction task by masking RGB and depth patches in individual RGB-D frames. We demonstrate the Mask3D is particularly effective in embedding 3D priors into the powerful 2D ViT backbone, enabling improved representation learning for various scene understanding tasks, such as semantic segmentation, instance segmentation and object detection. Experiments show that Mask3D notably outperforms existing self-supervised 3D pre-training approaches on ScanNet, NYUv2, and Cityscapes image understanding tasks, with an improvement of +6.5% mIoU against the state-of-the-art Pri3D on ScanNet image semantic segmentation.

Image restoration (IR) seeks to recover high-quality images from degraded observations caused by a wide range of factors, including noise, blur, compression, and adverse weather. While traditional IR methods have made notable progress by targeting individual degradation types, their specialization often comes at the cost of generalization, leaving them ill-equipped to handle the multifaceted distortions encountered in real-world applications. In response to this challenge, the all-in-one image restoration (AiOIR) paradigm has recently emerged, offering a unified framework that adeptly addresses multiple degradation types. These innovative models enhance the convenience and versatility by adaptively learning degradation-specific features while simultaneously leveraging shared knowledge across diverse corruptions. In this survey, we provide the first in-depth and systematic overview of AiOIR, delivering a structured taxonomy that categorizes existing methods by architectural designs, learning paradigms, and their core innovations. We systematically categorize current approaches and assess the challenges these models encounter, outlining research directions to propel this rapidly evolving field. To facilitate the evaluation of existing methods, we also consolidate widely-used datasets, evaluation protocols, and implementation practices, and compare and summarize the most advanced open-source models. As the first comprehensive review dedicated to AiOIR, this paper aims to map the conceptual landscape, synthesize prevailing techniques, and ignite further exploration toward more intelligent, unified, and adaptable visual restoration systems. A curated code repository is available at https://github.com/Harbinzzy/All-in-One-Image-Restoration-Survey.

Image quality is a critical factor in delivering visually appealing content on web platforms. However, images often suffer from degradation due to lossy operations applied by online social networks (OSNs), negatively affecting user experience. Image restoration is the process of recovering a clean high-quality image from a given degraded input. Recently, multi-task (all-in-one) image restoration models have gained significant attention, due to their ability to simultaneously handle different types of image degradations. However, these models often come with an excessively high number of trainable parameters, making them computationally inefficient. In this paper, we propose a strategy for compressing multi-task image restoration models. We aim to discover highly sparse subnetworks within overparameterized deep models that can match or even surpass the performance of their dense counterparts. The proposed model, namely MIR-L, utilizes an iterative pruning strategy that removes low-magnitude weights across multiple rounds, while resetting the remaining weights to their original initialization. This iterative process is important for the multi-task image restoration model's optimization, effectively uncovering "winning tickets" that maintain or exceed state-of-the-art performance at high sparsity levels. Experimental evaluation on benchmark datasets for the deraining, dehazing, and denoising tasks shows that MIR-L retains only 10% of the trainable parameters while maintaining high image restoration performance. Our code, datasets and pre-trained models are made publicly available at https://github.com/Thomkat/MIR-L.

Large-scale supervised pretraining is rapidly reshaping 3D medical image segmentation. However, existing efforts focus primarily on increasing dataset size and overlook the question of whether the backbone network is an effective representation learner at scale. In this work, we address this gap by revisiting ConvNeXt-based architectures for volumetric segmentation and introducing MedNeXt-v2, a compound-scaled 3D ConvNeXt that leverages improved micro-architecture and data scaling to deliver state-of-the-art performance. First, we show that routinely used backbones in large-scale pretraining pipelines are often suboptimal. Subsequently, we use comprehensive backbone benchmarking prior to scaling and demonstrate that stronger from scratch performance reliably predicts stronger downstream performance after pretraining. Guided by these findings, we incorporate a 3D Global Response Normalization module and use depth, width, and context scaling to improve our architecture for effective representation learning. We pretrain MedNeXt-v2 on 18k CT volumes and demonstrate state-of-the-art performance when fine-tuning across six challenging CT and MR benchmarks (144 structures), showing consistent gains over seven publicly released pretrained models. Beyond improvements, our benchmarking of these models also reveals that stronger backbones yield better results on similar data, representation scaling disproportionately benefits pathological segmentation, and that modality-specific pretraining offers negligible benefit once full finetuning is applied. In conclusion, our results establish MedNeXt-v2 as a strong backbone for large-scale supervised representation learning in 3D Medical Image Segmentation. Our code and pretrained models are made available with the official nnUNet repository at: https://www.github.com/MIC-DKFZ/nnUNet

The presence of composite degradations poses a significant challenge, since the underlying corruption factors exhibit complex and interdependent interactions. Even when the degradation types are known, accurately restoring the image remains difficult due to the intertwined nature of their effects and the need for selective control during the recovery process. To address this, we introduce CURE, a unified framework that enables controllable restoration in complex degradation settings by learning disentangled and adjustable representations. CURE is driven by four complementary objectives. First, an identity embedding is incorporated, along with a reconstruction constraint, to ensure that the model can reproduce the input image when restoration is unnecessary. Second, the ratio control mechanism blends the identity embedding with degradation-specific embeddings using user-regulated mixing ratios, allowing continuous control over restoration intensity. Third, an intermediate loss is applied to supervise stepwise outputs, each encouraged to tackle the removal of only a single degradation factor within a composite mixture. Finally, a permutation-invariant loss ensures that the model achieves consistent restoration quality regardless of the order in which multiple degradations are addressed. Since CURE modifies only the training strategy and not the underlying network architecture, it can be seamlessly integrated into existing controllable restoration models. Experiments demonstrate that CURE delivers state-of-the-art performance on composite degradation benchmarks, while enabling both selective and jointly fused restoration through flexible modulation of embedding ratios. The code and dataset are available at https://github.com/bo-oseng/CURE.

Click-based interactive image segmentation aims at extracting objects with a limited user clicking. A hierarchical backbone is the de-facto architecture for current methods. Recently, the plain, non-hierarchical Vision Transformer (ViT) has emerged as a competitive backbone for dense prediction tasks. This design allows the original ViT to be a foundation model that can be finetuned for downstream tasks without redesigning a hierarchical backbone for pretraining. Although this design is simple and has been proven effective, it has not yet been explored for interactive image segmentation. To fill this gap, we propose SimpleClick, the first interactive segmentation method that leverages a plain backbone. Based on the plain backbone, we introduce a symmetric patch embedding layer that encodes clicks into the backbone with minor modifications to the backbone itself. With the plain backbone pretrained as a masked autoencoder (MAE), SimpleClick achieves state-of-the-art performance. Remarkably, our method achieves 4.15 NoC@90 on SBD, improving 21.8% over the previous best result. Extensive evaluation on medical images demonstrates the generalizability of our method. We further develop an extremely tiny ViT backbone for SimpleClick and provide a detailed computational analysis, highlighting its suitability as a practical annotation tool.

Since convolutional neural networks (CNNs) perform well at learning generalizable image priors from large-scale data, these models have been extensively applied to image restoration and related tasks. Recently, another class of neural architectures, Transformers, have shown significant performance gains on natural language and high-level vision tasks. While the Transformer model mitigates the shortcomings of CNNs (i.e., limited receptive field and inadaptability to input content), its computational complexity grows quadratically with the spatial resolution, therefore making it infeasible to apply to most image restoration tasks involving high-resolution images. In this work, we propose an efficient Transformer model by making several key designs in the building blocks (multi-head attention and feed-forward network) such that it can capture long-range pixel interactions, while still remaining applicable to large images. Our model, named Restoration Transformer (Restormer), achieves state-of-the-art results on several image restoration tasks, including image deraining, single-image motion deblurring, defocus deblurring (single-image and dual-pixel data), and image denoising (Gaussian grayscale/color denoising, and real image denoising). The source code and pre-trained models are available at https://github.com/swz30/Restormer.

We analyze cumulative parameter trajectories of transformer training under AdamW and identify a dominant low-dimensional drift direction ("backbone") that captures 60--80% of long-horizon displacement from initialization. This direction is highly stable over rolling training windows yet reorients gradually across phases, particularly following objective reweighting. Per-batch gradients exhibit near-noise-floor alignment with the backbone, whereas optimizer-integrated updates align strongly with it, indicating that the structure emerges from accumulated optimizer dynamics rather than instantaneous gradient geometry. Replacing AdamW with SGD-family optimizers eliminates this structure, and reducing β_2 smoothly degrades backbone dominance and reheating recoverability. Reheating experiments show that transverse probe modes can be transiently re-excited without substantially altering accumulated backbone drift. These results provide a trajectory-level characterization of optimizer-induced geometric structure in transformer training and shift attention from instantaneous gradient properties to cumulative update dynamics.

Self-supervised learning (SSL) has advanced visual representation learning, but its value in chest radiography, a high-volume imaging modality with fine-grained findings, remains unclear. Meta's DINOv3 extends earlier SSL models through Gram-anchored self-distillation. Whether these design choices improve transfer learning for chest radiography has not been systematically tested. We benchmarked DINOv3 against DINOv2 and ImageNet initialization across seven datasets (n>814,000). Two representative backbones were evaluated: ViT-B/16 and ConvNeXt-B. Images were analyzed at 224x224, 512x512, and 1024x1024 pixels. We additionally assessed frozen features from a 7B model. The primary outcome was mean AUROC across labels. At 224x224, DINOv3 and DINOv2 achieved comparable performance on adult datasets. Increasing resolution to 512x512 yielded consistent improvements for DINOv3 over both DINOv2 and ImageNet. In contrast, results in pediatric cohort showed no differences across initializations. Across all settings, ConvNeXt-B outperformed ViT-B/16. Models using frozen DINOv3-7B features underperformed relative to fully finetuned 86-89M-parameter backbones, highlighting the importance of domain adaptation. Scaling to 1024x1024 did not further improve accuracy. Resolution-related gains were most evident for boundary-dependent and small focal abnormalities. In chest radiography, higher input resolution is critical for leveraging the benefits of modern self-supervised models. 512x512 pixels represent a practical upper limit where DINOv3-initialized ConvNeXt-B networks provide the strongest performance, while larger inputs offer minimal return on cost. Clinically, these findings support use of finetuned, mid-sized backbones at 512x512 for chest radiograph interpretation, with the greatest gains expected in detecting subtle or boundary-centered lesions relevant to emergency and critical care settings.

Self-supervised image backbones can be used to address complex 2D tasks (e.g., semantic segmentation, object discovery) very efficiently and with little or no downstream supervision. Ideally, 3D backbones for lidar should be able to inherit these properties after distillation of these powerful 2D features. The most recent methods for image-to-lidar distillation on autonomous driving data show promising results, obtained thanks to distillation methods that keep improving. Yet, we still notice a large performance gap when measuring the quality of distilled and fully supervised features by linear probing. In this work, instead of focusing only on the distillation method, we study the effect of three pillars for distillation: the 3D backbone, the pretrained 2D backbones, and the pretraining dataset. In particular, thanks to our scalable distillation method named ScaLR, we show that scaling the 2D and 3D backbones and pretraining on diverse datasets leads to a substantial improvement of the feature quality. This allows us to significantly reduce the gap between the quality of distilled and fully-supervised 3D features, and to improve the robustness of the pretrained backbones to domain gaps and perturbations.

Semi-supervised semantic segmentation (SSSS) has long turned on one question, which pseudo-labels to trust, and answered it with ever more careful confidence filtering. Foundation backbones change the regime: with a DINOv2 teacher a strict threshold already retains a measured 98%-clean pseudo-label set, so the accuracy that remains lives not in the filter but in how the embedding space is structured by class. We propose PixCon, a clean-positive pixel-contrastive framework. PixCon maintains a per-class memory bank that admits only labeled pixels the student already classifies correctly, guaranteeing a contamination-free positive set (ρ_F=0) by construction, unlike prior contrastive SSSS banks (ReCo, U^2PL) built from confidence-filtered pseudo-labels. It is a single branch over a consistency backbone, adds no inference-time parameters, and needs no bank-specific threshold. A first-order analysis of the supervised-InfoNCE gradient explains why contamination hurts: its false-positive term scales as ρ_F/(1-ρ_F), which we measure (0.018 on Pascal, 0.106 on ADE20K) rather than assume. Across Pascal VOC, Cityscapes, and ADE20K, PixCon matches or improves a strong DINOv2-based UniMatch V2 baseline in a compute-matched one-switch protocol: it improves every Pascal-1/8 seed (a per-seed gain of about +0.2 mIoU) and its three-seed mean reaches 87.90, the published UniMatch V2-B figure. Because contamination is already rare under foundation-model teachers, our analysis indicates the ρ_F=0 guarantee acts chiefly as robustness as teachers weaken, while the accuracy gain comes from cleaner positive supervision, making clean-positive contrast a robust, low-cost default for foundation-model SSSS.

Despite the significant progress in diffusion prior-based image restoration, most existing methods apply uniform processing to the entire image, lacking the capability to perform region-customized image restoration according to user instructions. In this work, we propose a new framework, namely InstructRestore, to perform region-adjustable image restoration following human instructions. To achieve this, we first develop a data generation engine to produce training triplets, each consisting of a high-quality image, the target region description, and the corresponding region mask. With this engine and careful data screening, we construct a comprehensive dataset comprising 536,945 triplets to support the training and evaluation of this task. We then examine how to integrate the low-quality image features under the ControlNet architecture to adjust the degree of image details enhancement. Consequently, we develop a ControlNet-like model to identify the target region and allocate different integration scales to the target and surrounding regions, enabling region-customized image restoration that aligns with user instructions. Experimental results demonstrate that our proposed InstructRestore approach enables effective human-instructed image restoration, such as images with bokeh effects and user-instructed local enhancement. Our work advances the investigation of interactive image restoration and enhancement techniques. Data, code, and models will be found at https://github.com/shuaizhengliu/InstructRestore.git.

Methods based on diffusion backbones have recently revolutionized novel view synthesis (NVS). However, those models require pretrained 2D diffusion checkpoints (e.g., Stable Diffusion) as the basis for geometrical priors. Since such checkpoints require exorbitant amounts of data and compute to train, this greatly limits the scalability of diffusion-based NVS models. We present Next-Scale Autoregression Conditioned by View (ArchonView), a method that significantly exceeds state-of-the-art methods despite being trained from scratch with 3D rendering data only and no 2D pretraining. We achieve this by incorporating both global (pose-augmented semantics) and local (multi-scale hierarchical encodings) conditioning into a backbone based on the next-scale autoregression paradigm. Our model also exhibits robust performance even for difficult camera poses where previous methods fail, and is several times faster in inference speed compared to diffusion. We experimentally verify that performance scales with model and dataset size, and conduct extensive demonstration of our method's synthesis quality across several tasks. Our code is open-sourced at https://github.com/Shiran-Yuan/ArchonView.

Choosing the right large language model (LLM) backbone is the most consequential decision when building a vision-language model (VLM), yet it remains fundamentally unprincipled: compute-based scaling laws fail to generalize across model families, and no framework exists for directly predicting VLM performance before training begins. We propose the Capability-Driven Multimodal Scaling Law, the first cross-family framework that predicts VLM benchmark accuracy from directly observable textual capability. Given a low-dimensional capability score S extracted from LLM textual benchmarks via PCA, we model VLM performance as a function of S, with a per-backbone transfer rate and an absorption rate that quantifies data-scaling efficiency. To fit and validate the framework, we train over 150 VLMs on 34 LLMs spanning 7 model families under a strictly controlled recipe. Evaluations on more than 200 textual and 50 multimodal benchmarks show that the law accurately extrapolates transfer rate from models up to 8B parameters to 72B-scale backbones, predicts full VLM training trajectories with high fidelity, and generalizes to entirely held-out model families. Beyond the scaling law, our analysis surfaces actionable insights: certain textual benchmarks negatively correlate with multimodal performance, exposing latent benchmark-gaming behavior; base LLMs outperform instruction-tuned counterparts as VLM backbones due to higher absorption rates and lower data-scaling decay; and different model families occupy distinct positions in the transfer--absorption space. The framework turns backbone selection from costly empirical sweeps into a principled, quantitative decision. Code and data are available at https://github.com/wangq-dev/CDMScaling.

Neural network based computer vision systems are typically built on a backbone, a pretrained or randomly initialized feature extractor. Several years ago, the default option was an ImageNet-trained convolutional neural network. However, the recent past has seen the emergence of countless backbones pretrained using various algorithms and datasets. While this abundance of choice has led to performance increases for a range of systems, it is difficult for practitioners to make informed decisions about which backbone to choose. Battle of the Backbones (BoB) makes this choice easier by benchmarking a diverse suite of pretrained models, including vision-language models, those trained via self-supervised learning, and the Stable Diffusion backbone, across a diverse set of computer vision tasks ranging from classification to object detection to OOD generalization and more. Furthermore, BoB sheds light on promising directions for the research community to advance computer vision by illuminating strengths and weakness of existing approaches through a comprehensive analysis conducted on more than 1500 training runs. While vision transformers (ViTs) and self-supervised learning (SSL) are increasingly popular, we find that convolutional neural networks pretrained in a supervised fashion on large training sets still perform best on most tasks among the models we consider. Moreover, in apples-to-apples comparisons on the same architectures and similarly sized pretraining datasets, we find that SSL backbones are highly competitive, indicating that future works should perform SSL pretraining with advanced architectures and larger pretraining datasets. We release the raw results of our experiments along with code that allows researchers to put their own backbones through the gauntlet here: https://github.com/hsouri/Battle-of-the-Backbones

Automated radiology report generation from 3D computed tomography (CT) volumes is challenging due to extreme sequence lengths, severe class imbalance, and the tendency of large language models (LLMs) to ignore visual tokens in favor of linguistic priors. We present Ker-VLJEPA-3B, a four-phase curriculum learning framework for free-text report generation from thoracic CT volumes. A phased training curriculum progressively adapts a Llama 3.2 3B decoder to ground its output in visual features from a frozen, self-supervised encoder. Our visual backbone (LeJEPA ViT-Large) is trained via self-supervised joint-embedding prediction on unlabeled CTs, without text supervision. Unlike contrastive models (CLIP, BiomedCLIP), this language-free backbone yields modality-pure representations. Vision-language alignment is deferred to the curriculum's bridge and generation phases. This modality-agnostic design can integrate any self-supervised encoder into an LLM without paired text during foundation training. Methodological innovations include: (1) zone-constrained cross-attention compressing slice embeddings into 32 spatially-grounded visual tokens; (2) PCA whitening of anisotropic LLM embeddings; (3) a positive-findings-only strategy eliminating posterior collapse; (4) warm bridge initialization transferring projection weights; and (5) selective cross-attention freezing with elastic weight consolidation to prevent catastrophic forgetting. Evaluated on the CT-RATE benchmark (2,984 validation volumes, 18 classes), Ker-VLJEPA-3B achieves a macro F1 of 0.429, surpassing the state-of-the-art (U-VLM, macro F1 = 0.414) by 3.6%, and reaching 0.448 (+8.2%) with threshold optimization. Ablation studies confirm 56.6% of generation quality derives from patient-specific visual content. Code and weights are available.

Inverse rendering aims to recover both 3D geometry and physically meaningful material properties from images, enabling applications such as relighting and novel view synthesis. Optimization-based methods achieve high fidelity but require costly per-scene fitting, while image-space learning-based approaches often suffer from multi-view inconsistencies and lack an explicit 3D representation for stable novel view rendering. We present a feed-forward multi-view reconstruction framework for inverse rendering that directly predicts a structured 3D Gaussian representation with intrinsic material attributes. Each Gaussian primitive is parameterized by mean, normal, opacity, rotation, scale, albedo, metallic, and roughness, enabling a disentangled and physically grounded scene representation. Our model integrates priors from a material estimation network with a multi-view 3D reconstruction backbone, allowing joint prediction of geometry and reflectance parameters in a single forward pass. Experiments on synthetic and real-world datasets demonstrate improved multi-view consistency compared to 2D baselines, accurate material recovery, and stable novel view rendering. Our representation further supports physically-based relighting and more faithful modeling of view-dependent effects compared to existing RGB-based feed-forward reconstruction methods. Our project webpage is: https://poliik.github.io/invsplat/{https://poliik.github.io/invsplat/}.

Blind face restoration has made great progress in producing high-quality and lifelike images. Yet it remains challenging to preserve the ID information especially when the degradation is heavy. Current reference-guided face restoration approaches either require face alignment or personalized test-tuning, which are unfaithful or time-consuming. In this paper, we propose a tuning-free method named RestorerID that incorporates ID preservation during face restoration. RestorerID is a diffusion model-based method that restores low-quality images with varying levels of degradation by using a single reference image. To achieve this, we propose a unified framework to combine the ID injection with the base blind face restoration model. In addition, we design a novel Face ID Rebalancing Adapter (FIR-Adapter) to tackle the problems of content unconsistency and contours misalignment that are caused by information conflicts between the low-quality input and reference image. Furthermore, by employing an Adaptive ID-Scale Adjusting strategy, RestorerID can produce superior restored images across various levels of degradation. Experimental results on the Celeb-Ref dataset and real-world scenarios demonstrate that RestorerID effectively delivers high-quality face restoration with ID preservation, achieving a superior performance compared to the test-tuning approaches and other reference-guided ones. The code of RestorerID is available at https://github.com/YingJiacheng/RestorerID.

Continued pretraining offers a promising solution for adapting foundation models to a new target domain. However, in specialized domains, available datasets are often very small, limiting the applicability of SSL methods developed for large-scale pretraining and making hyperparameter search infeasible. In addition, pretrained models are usually released as backbone-weights only, lacking important information to continue pretraining. We propose to bridge this gap with DIET-CP, a simple continued pretraining strategy, where any strong foundation model can be steered towards the new data distribution of interest. DIET-CP relies on a very simple objective, requires no labels, and introduces no more hyperparameters than supervised finetuning. It is stable across data modalities and backbone choices, while providing a significant performance boost for state-of-the-art models such as DINOv3 using only 1000 images.

Diffusion-based text-to-image models have demonstrated impressive achievements in diversity and aesthetics but struggle to generate images with legible visual texts. Existing backbone models have limitations such as misspelling, failing to generate texts, and lack of support for Chinese text, but their development shows promising potential. In this paper, we propose a series of methods, aiming to empower backbone models to generate visual texts in English and Chinese. We first conduct a preliminary study revealing that Byte Pair Encoding (BPE) tokenization and the insufficient learning of cross-attention modules restrict the performance of the backbone models. Based on these observations, we make the following improvements: (1) We design a mixed granularity input strategy to provide more suitable text representations; (2) We propose to augment the conventional training objective with three glyph-aware training losses, which enhance the learning of cross-attention modules and encourage the model to focus on visual texts. Through experiments, we demonstrate that our methods can effectively empower backbone models to generate semantic relevant, aesthetically appealing, and accurate visual text images, while maintaining their fundamental image generation quality.

Modern top-performing object detectors depend heavily on backbone networks, whose advances bring consistent performance gains through exploring more effective network structures. In this paper, we propose a novel and flexible backbone framework, namely CBNetV2, to construct high-performance detectors using existing open-sourced pre-trained backbones under the pre-training fine-tuning paradigm. In particular, CBNetV2 architecture groups multiple identical backbones, which are connected through composite connections. Specifically, it integrates the high- and low-level features of multiple backbone networks and gradually expands the receptive field to more efficiently perform object detection. We also propose a better training strategy with assistant supervision for CBNet-based detectors. Without additional pre-training of the composite backbone, CBNetV2 can be adapted to various backbones (CNN-based vs. Transformer-based) and head designs of most mainstream detectors (one-stage vs. two-stage, anchor-based vs. anchor-free-based). Experiments provide strong evidence that, compared with simply increasing the depth and width of the network, CBNetV2 introduces a more efficient, effective, and resource-friendly way to build high-performance backbone networks. Particularly, our Dual-Swin-L achieves 59.4% box AP and 51.6% mask AP on COCO test-dev under the single-model and single-scale testing protocol, which is significantly better than the state-of-the-art result (57.7% box AP and 50.2% mask AP) achieved by Swin-L, while the training schedule is reduced by 6times. With multi-scale testing, we push the current best single model result to a new record of 60.1% box AP and 52.3% mask AP without using extra training data. Code is available at https://github.com/VDIGPKU/CBNetV2.

Image restoration is a fundamental problem that involves recovering a high-quality clean image from its degraded observation. All-In-One image restoration models can effectively restore images from various types and levels of degradation using degradation-specific information as prompts to guide the restoration model. In this work, we present the first approach that uses human-written instructions to guide the image restoration model. Given natural language prompts, our model can recover high-quality images from their degraded counterparts, considering multiple degradation types. Our method, InstructIR, achieves state-of-the-art results on several restoration tasks including image denoising, deraining, deblurring, dehazing, and (low-light) image enhancement. InstructIR improves +1dB over previous all-in-one restoration methods. Moreover, our dataset and results represent a novel benchmark for new research on text-guided image restoration and enhancement. Our code, datasets and models are available at: https://github.com/mv-lab/InstructIR

Multi-task image restoration has gained significant interest due to its inherent versatility and efficiency compared to its single-task counterpart. Despite its potential, performance degradation is observed with an increase in the number of tasks, primarily attributed to the distinct nature of each restoration task. Addressing this challenge, we introduce \textbf{DINO-IR}, a novel multi-task image restoration approach leveraging robust features extracted from DINOv2. Our empirical analysis shows that while shallow features of DINOv2 capture rich low-level image characteristics, the deep features ensure a robust semantic representation insensitive to degradations while preserving high-frequency contour details. Building on these features, we devise specialized components, including multi-layer semantic fusion module, DINO-Restore adaption and fusion module, and DINO perception contrastive loss, to integrate DINOv2 features into the restoration paradigm. Equipped with the aforementioned components, our DINO-IR performs favorably against existing multi-task image restoration approaches in various tasks by a large margin, indicating the superiority and necessity of reinforcing the robust features for multi-task image restoration.

This work presents a systematic investigation into modernizing Vision Transformer backbones by leveraging architectural advancements from the past five years. While preserving the canonical Attention-FFN structure, we conduct a component-wise refinement involving normalization, activation functions, positional encoding, gating mechanisms, and learnable tokens. These updates form a new generation of Vision Transformers, which we call ViT-5. Extensive experiments demonstrate that ViT-5 consistently outperforms state-of-the-art plain Vision Transformers across both understanding and generation benchmarks. On ImageNet-1k classification, ViT-5-Base reaches 84.2\% top-1 accuracy under comparable compute, exceeding DeiT-III-Base at 83.8\%. ViT-5 also serves as a stronger backbone for generative modeling: when plugged into an SiT diffusion framework, it achieves 1.84 FID versus 2.06 with a vanilla ViT backbone. Beyond headline metrics, ViT-5 exhibits improved representation learning and favorable spatial reasoning behavior, and transfers reliably across tasks. With a design aligned with contemporary foundation-model practices, ViT-5 offers a simple drop-in upgrade over vanilla ViT for mid-2020s vision backbones.

Image restoration networks are usually comprised of an encoder and a decoder, responsible for aggregating image content from noisy, distorted data and to restore clean, undistorted images, respectively. Data aggregation as well as high-resolution image generation both usually come at the risk of involving aliases, i.e.~standard architectures put their ability to reconstruct the model input in jeopardy to reach high PSNR values on validation data. The price to be paid is low model robustness. In this work, we show that simply providing alias-free paths in state-of-the-art reconstruction transformers supports improved model robustness at low costs on the restoration performance. We do so by proposing BOA-Restormer, a transformer-based image restoration model that executes downsampling and upsampling operations partly in the frequency domain to ensure alias-free paths along the entire model while potentially preserving all relevant high-frequency information.

We present Muskie, a native multi-view vision backbone designed for 3D vision tasks. Unlike existing models, which are frame-wise and exhibit limited multi-view consistency, Muskie is designed to process multiple views simultaneously and introduce multi-view consistency in pre-training stage. Muskie is trained to reconstruct heavily masked content in one view by finding and utilizing geometric correspondences from other views. Through this pretext task and our proposed aggressive masking strategy, the model implicitly to learn view-invariant features and develop strong geometric understanding without any 3D supervision. Compared with state-of-the-art frame-wise backbones such as DINO, Muskie achieves higher multi-view correspondence accuracy. Furthermore, we demonstrate that using Muskie as a backbone consistently enhances performance on downstream 3D tasks, including camera pose estimation and pointmap reconstruction. Codes are publicly available at https://leo-frank.github.io/Muskie/

We introduce LMCodec, a causal neural speech codec that provides high quality audio at very low bitrates. The backbone of the system is a causal convolutional codec that encodes audio into a hierarchy of coarse-to-fine tokens using residual vector quantization. LMCodec trains a Transformer language model to predict the fine tokens from the coarse ones in a generative fashion, allowing for the transmission of fewer codes. A second Transformer predicts the uncertainty of the next codes given the past transmitted codes, and is used to perform conditional entropy coding. A MUSHRA subjective test was conducted and shows that the quality is comparable to reference codecs at higher bitrates. Example audio is available at https://mjenrungrot.github.io/chrome-media-audio-papers/publications/lmcodec.

In contrast to numerous NLP and 2D vision foundational models, learning a 3D foundational model poses considerably greater challenges. This is primarily due to the inherent data variability and diversity of downstream tasks. In this paper, we introduce a novel universal 3D pre-training framework designed to facilitate the acquisition of efficient 3D representation, thereby establishing a pathway to 3D foundational models. Considering that informative 3D features should encode rich geometry and appearance cues that can be utilized to render realistic images, we propose to learn 3D representations by differentiable neural rendering. We train a 3D backbone with a devised volumetric neural renderer by comparing the rendered with the real images. Notably, our approach seamlessly integrates the learned 3D encoder into various downstream tasks. These tasks encompass not only high-level challenges such as 3D detection and segmentation but also low-level objectives like 3D reconstruction and image synthesis, spanning both indoor and outdoor scenarios. Besides, we also illustrate the capability of pre-training a 2D backbone using the proposed methodology, surpassing conventional pre-training methods by a large margin. For the first time, PonderV2 achieves state-of-the-art performance on 11 indoor and outdoor benchmarks, implying its effectiveness. Code and models are available at https://github.com/OpenGVLab/PonderV2.

Following the success of Word2Vec embeddings, graph embeddings (GEs) have gained substantial traction. GEs are commonly generated and evaluated extrinsically on downstream applications, but intrinsic evaluations of the original graph properties in terms of topological structure and semantic information have been lacking. Understanding these will help identify the deficiency of the various families of GE methods when vectorizing graphs in terms of preserving the relevant knowledge or learning incorrect knowledge. To address this, we propose RESTORE, a framework for intrinsic GEs assessment through graph reconstruction. We show that reconstructing the original graph from the underlying GEs yields insights into the relative amount of information preserved in a given vector form. We first introduce the graph reconstruction task. We generate GEs from three GE families based on factorization methods, random walks, and deep learning (with representative algorithms from each family) on the CommonSense Knowledge Graph (CSKG). We analyze their effectiveness in preserving the (a) topological structure of node-level graph reconstruction with an increasing number of hops and (b) semantic information on various word semantic and analogy tests. Our evaluations show deep learning-based GE algorithm (SDNE) is overall better at preserving (a) with a mean average precision (mAP) of 0.54 and 0.35 for 2 and 3-hop reconstruction respectively, while the factorization-based algorithm (HOPE) is better at encapsulating (b) with an average Euclidean distance of 0.14, 0.17, and 0.11 for 1, 2, and 3-hop reconstruction respectively. The modest performance of these GEs leaves room for further research avenues on better graph representation learning.

Multi-view 3D reconstruction has achieved remarkable progress with the advent of feed-forward 3D reconstruction models. However, these models are typically trained and evaluated under ideal, degradation-free imaging conditions, whereas real-world observations often contain degradations that differ significantly from such settings. Improving robustness for multi-view 3D reconstruction under degraded conditions therefore remains an important challenge. We present Geometry-Aware Representation Denoising (GARD), a novel framework that performs diffusion-based multi-view restoration directly in the feature space of a feed-forward 3D reconstruction model. This design exploits the geometry-aware feature representations of the 3D reconstructor to effectively recover accurate scene geometry. Furthermore, by employing an additional RGB image decoder, the refined representations can also be used to restore high-quality RGB images, thereby enabling the simultaneous recovery of 3D scene geometry and high-quality imagery. Comprehensive experiments on the Depth Anything 3 (DA3) benchmark demonstrate the effectiveness of the proposed GARD framework.

Image restoration is a long-standing low-level vision problem that aims to restore high-quality images from low-quality images (e.g., downscaled, noisy and compressed images). While state-of-the-art image restoration methods are based on convolutional neural networks, few attempts have been made with Transformers which show impressive performance on high-level vision tasks. In this paper, we propose a strong baseline model SwinIR for image restoration based on the Swin Transformer. SwinIR consists of three parts: shallow feature extraction, deep feature extraction and high-quality image reconstruction. In particular, the deep feature extraction module is composed of several residual Swin Transformer blocks (RSTB), each of which has several Swin Transformer layers together with a residual connection. We conduct experiments on three representative tasks: image super-resolution (including classical, lightweight and real-world image super-resolution), image denoising (including grayscale and color image denoising) and JPEG compression artifact reduction. Experimental results demonstrate that SwinIR outperforms state-of-the-art methods on different tasks by up to 0.14\sim0.45dB, while the total number of parameters can be reduced by up to 67%.

Transformer-based 3D reconstruction has emerged as a powerful paradigm for recovering geometry and appearance from multi-view observations, offering strong performance across challenging visual conditions. As these models scale to larger backbones and higher-resolution inputs, improving their efficiency becomes increasingly important for practical deployment. However, modern 3D transformer pipelines face two coupled challenges: dense multi-view attention creates substantial token-mixing overhead, and low-precision execution can destabilize geometry-sensitive representations and degrade depth, pose, and 3D consistency. To address the first challenge, we propose Lite3R, a model-agnostic teacher-student framework that replaces dense attention with Sparse Linear Attention to preserve important geometric interactions while reducing attention cost. To address the second challenge, we introduce a parameter-efficient FP8-aware quantization-aware training (FP8-aware QAT) strategy with partial attention distillation, which freezes the vast majority of pretrained backbone parameters and trains only lightweight linear-branch projection layers, enabling stable low-precision deployment while retaining pretrained geometric priors. We further evaluate Lite3R on two representative backbones, VGGT and DA3-Large, over BlendedMVS and DTU64, showing that it substantially reduces latency (1.7-2.0x) and memory usage (1.9-2.4x) while preserving competitive reconstruction quality overall. These results demonstrate that Lite3R provides an effective algorithm-system co-design approach for practical transformer-based 3D reconstruction. Code: https://github.com/AIGeeksGroup/Lite3R. Website: https://aigeeksgroup.github.io/Lite3R.

Image restoration is a challenging and ill-posed problem which also has been a long-standing issue. However, most of learning based restoration methods are proposed to target one degradation type which means they are lack of generalization. In this paper, we proposed a multi-branch restoration model inspired from the Human Visual System (i.e., Retinal Ganglion Cells) which can achieve multiple restoration tasks in a general framework. The experiments show that the proposed multi-branch architecture, called CMFNet, has competitive performance results on four datasets, including image dehazing, deraindrop, and deblurring, which are very common applications for autonomous cars. The source code and pretrained models of three restoration tasks are available at https://github.com/FanChiMao/CMFNet.

Universal image restoration (UIR) aims to recover clean images from diverse and unknown degradations using a unified model. Existing UIR methods primarily focus on pixel reconstruction and often lack explicit diagnostic reasoning over degradation composition, severity, and scene semantics prior to restoration. We propose Reason and Restore (R\&R), a novel framework that integrates structured Chain-of-Thought (CoT) reasoning into the image restoration pipeline. R\&R introduces an explicit reasoner, implemented by fine-tuning Qwen3-VL, to diagnose degradation types, quantify degradation severity, infer key degradation-related factors, and describe relevant scene and object semantics. The resulting structured reasoning provides interpretable and fine-grained diagnostic priors for the restorer. To further improve restoration quality, the quantified degradation severity produced by the reasoner is leveraged as reinforcement learning (RL) signals to guide and strengthen the restorer. Unlike existing multimodal LLM-based agentic systems that decouple reasoning from low-level vision tasks, R\&R tightly couples semantic diagnostic reasoning with pixel-level restoration in a unified framework. Extensive experiments across diverse UIR benchmarks demonstrate that R\&R achieves state-of-the-art performance while offering unique interpretability into the restoration process.

Existing monocular depth estimation methods have achieved excellent robustness in diverse scenes, but they can only retrieve affine-invariant depth, up to an unknown scale and shift. However, in some video-based scenarios such as video depth estimation and 3D scene reconstruction from a video, the unknown scale and shift residing in per-frame prediction may cause the depth inconsistency. To solve this problem, we propose a locally weighted linear regression method to recover the scale and shift with very sparse anchor points, which ensures the scale consistency along consecutive frames. Extensive experiments show that our method can boost the performance of existing state-of-the-art approaches by 50% at most over several zero-shot benchmarks. Besides, we merge over 6.3 million RGBD images to train strong and robust depth models. Our produced ResNet50-backbone model even outperforms the state-of-the-art DPT ViT-Large model. Combining with geometry-based reconstruction methods, we formulate a new dense 3D scene reconstruction pipeline, which benefits from both the scale consistency of sparse points and the robustness of monocular methods. By performing the simple per-frame prediction over a video, the accurate 3D scene shape can be recovered.

Image inpainting has made significant advances in recent years. However, it is still challenging to recover corrupted images with both vivid textures and reasonable structures. Some specific methods only tackle regular textures while losing holistic structures due to the limited receptive fields of convolutional neural networks (CNNs). On the other hand, attention-based models can learn better long-range dependency for the structure recovery, but they are limited by the heavy computation for inference with large image sizes. To address these issues, we propose to leverage an additional structure restorer to facilitate the image inpainting incrementally. The proposed model restores holistic image structures with a powerful attention-based transformer model in a fixed low-resolution sketch space. Such a grayscale space is easy to be upsampled to larger scales to convey correct structural information. Our structure restorer can be integrated with other pretrained inpainting models efficiently with the zero-initialized residual addition. Furthermore, a masking positional encoding strategy is utilized to improve the performance with large irregular masks. Extensive experiments on various datasets validate the efficacy of our model compared with other competitors. Our codes are released in https://github.com/DQiaole/ZITS_inpainting.

Representing features at multiple scales is of great importance for numerous vision tasks. Recent advances in backbone convolutional neural networks (CNNs) continually demonstrate stronger multi-scale representation ability, leading to consistent performance gains on a wide range of applications. However, most existing methods represent the multi-scale features in a layer-wise manner. In this paper, we propose a novel building block for CNNs, namely Res2Net, by constructing hierarchical residual-like connections within one single residual block. The Res2Net represents multi-scale features at a granular level and increases the range of receptive fields for each network layer. The proposed Res2Net block can be plugged into the state-of-the-art backbone CNN models, e.g., ResNet, ResNeXt, and DLA. We evaluate the Res2Net block on all these models and demonstrate consistent performance gains over baseline models on widely-used datasets, e.g., CIFAR-100 and ImageNet. Further ablation studies and experimental results on representative computer vision tasks, i.e., object detection, class activation mapping, and salient object detection, further verify the superiority of the Res2Net over the state-of-the-art baseline methods. The source code and trained models are available on https://mmcheng.net/res2net/.

Existing 3D editing methods rely on computationally intensive scene-by-scene iterative optimization and suffer from multi-view inconsistency. We propose an effective and feed-forward 3D editing framework based on the TRELLIS generative backbone, capable of modifying 3D models from a single editing view. Our framework addresses two key issues: adapting training-free 2D editing to structured 3D representations, and overcoming the bottleneck of appearance fidelity in compressed 3D features. To ensure geometric consistency, we introduce Voxel FlowEdit, an edit-driven flow in the sparse voxel latent space that achieves globally consistent 3D deformation in a single pass. To restore high-fidelity details, we develop a normal-guided single to multi-view generation module as an external appearance prior, successfully recovering high-frequency textures. Experiments demonstrate that our method enables fast, globally consistent, and high-fidelity 3D model editing.

The hybrid deep models of Vision Transformer (ViT) and Convolution Neural Network (CNN) have emerged as a powerful class of backbones for vision tasks. Scaling up the input resolution of such hybrid backbones naturally strengthes model capacity, but inevitably suffers from heavy computational cost that scales quadratically. Instead, we present a new hybrid backbone with HIgh-Resolution Inputs (namely HIRI-ViT), that upgrades prevalent four-stage ViT to five-stage ViT tailored for high-resolution inputs. HIRI-ViT is built upon the seminal idea of decomposing the typical CNN operations into two parallel CNN branches in a cost-efficient manner. One high-resolution branch directly takes primary high-resolution features as inputs, but uses less convolution operations. The other low-resolution branch first performs down-sampling and then utilizes more convolution operations over such low-resolution features. Experiments on both recognition task (ImageNet-1K dataset) and dense prediction tasks (COCO and ADE20K datasets) demonstrate the superiority of HIRI-ViT. More remarkably, under comparable computational cost (sim5.0 GFLOPs), HIRI-ViT achieves to-date the best published Top-1 accuracy of 84.3% on ImageNet with 448times448 inputs, which absolutely improves 83.4% of iFormer-S by 0.9% with 224times224 inputs.